Please use this identifier to cite or link to this item:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/73334
Title: | 不同表面粗糙度於紅銅圓管對水的池沸騰之影響 Effects of Varying the Surface Roughness on Copper Tubes in Pool Boiling of Water |
Authors: | Mario Roberto Mata Arenales 馬理歐 |
Advisor: | 陳炳煇(Ping-Hei Chen) |
Keyword: | surface roughness,hydrophobic pattern,screen printing,wall superheat,boiling heat transfer coefficient,critical heat flux,heterogeneous wettable surface, |
Publication Year : | 2019 |
Degree: | 碩士 |
Abstract: | Results showing the effect of pool boiling on the surface roughness of copper tubes using deionized water as the working fluid are presented in this paper. To obtain different surface roughness values of each sample, the copper tubes were rotated with an electric rotor and sanded using sandpapers with different grits. The average surface roughness values of the plain copper tubes were in the range 0.032–0.544 µm. All experimental samples were horizontally oriented, and experiments were carried out in ambient conditions up to a moderate heat flux regime (~ 450 kW/m2). Moreover, for a comparative analysis, a sample with a rough surface and hydrophobic patterns was included in this study. Compared with the smoothest surface, the aforementioned rough sample exhibited a heat transfer coefficient that was up to a factor 1.5 higher for the highest evaluated heat flux. These findings show that even small increments in the surface roughness along with the addition of hydrophobic patterns can significantly lower the wall superheat temperature and increase the heat transfer coefficient of copper tubes. Furthermore, supported by high-speed imaging of the experiment, it was observed that increasing the surface roughness caused bubbles to depart when their diameter was larger, and the nucleation site density and bubble departure frequency increased. In contrast, the rough surface with hydrophobic patterns exhibited the best overall enhancement, including the characteristics mentioned above of the rough surfaces along with a uniform distribution of the bubbles around the surface. |
URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/73334 |
DOI: | 10.6342/NTU201900716 |
Fulltext Rights: | 有償授權 |
Appears in Collections: | 機械工程學系 |
Files in This Item:
File | Size | Format | |
---|---|---|---|
-108-R06522322-1.pdf Restricted Access | 6.01 MB | Adobe PDF |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.