請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/73334
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 陳炳煇(Ping-Hei Chen) | |
dc.contributor.author | Mario Roberto Mata Arenales | en |
dc.contributor.author | 馬理歐 | zh_TW |
dc.date.accessioned | 2021-06-17T07:29:02Z | - |
dc.date.available | 2019-07-03 | |
dc.date.copyright | 2019-07-03 | |
dc.date.issued | 2019 | |
dc.date.submitted | 2019-06-18 | |
dc.identifier.citation | [1] S. Nukiyama, The maximum and minimum values of the heat Q transmitted from metal to boiling water under atmospheric pressure, J. Soc. Mech. Eng. 37 (1934) 367–374. doi:10.1299/jsmemagazine.37.206_367.
[2] J. Kim, S. Jun, R. Laksnarain, S.M. You, Effect of surface roughness on pool boiling heat transfer at a heated surface having moderate wettability, Int. J. Heat Mass Transf. 101 (2016) 992–1002. doi:10.1016/j.ijheatmasstransfer.2016.05.067. [3] J.S. Kim, A. Girard, S. Jun, J. Lee, S.M. You, Effect of surface roughness on pool boiling heat transfer of water on hydrophobic surfaces, Int. J. Heat Mass Transf. 118 (2018) 802–811. doi:10.1016/j.ijheatmasstransfer.2017.10.124. [4] J.M.S. Jabardo, G. Ribatski, E. Stelute, Roughness and surface material effects on nucleate boiling heat transfer from cylindrical surfaces to refrigerants R-134a and R-123, Exp. Therm. Fluid Sci. 33 (2009) 579–590. doi:10.1016/j.expthermflusci.2008.12.004. [5] R. Hosseini, A. Gholaminejad, H. Jahandar, Roughness effects on nucleate pool boiling of R-113 on horizontal circular copper surfaces, World Acad. Sci. Eng. Technol. (2011). [6] M.S. El-Genk, A. Suszko, Saturation and subcooled chf correlations for PF-5060 dielectric liquid on inclined rough copper surfaces, Multiph. Sci. Technol. 26 (2) (2014) 139–170. doi:10.1615/multscientechn.v26.i2.20. [7] T.P. Allred, J.A. Weibel, S. V. Garimella, Enabling highly effective boiling from superhydrophobic surfaces, Phys. Rev. Lett. 120 (2018) 174501. doi:10.1103/physrevlett.120.174501. [8] T.P. Allred, J.A. Weibel, S. V. Garimella, The petal effect of parahydrophobic surfaces offers low receding contact angles that promote effective boiling, Int. J. Heat Mass Transf. 135 (2019) 403–412. doi:10.1016/j.ijheatmasstransfer.2019.02.002. [9] C.S. Sujith Kumar, Y.W. Chang, P.H. Chen, Effect of heterogeneous wettable structures on pool boiling performance of cylindrical copper surfaces, Appl. Therm. Eng. (2017). doi:10.1016/j.applthermaleng.2017.08.069. [10] M. Dharmendra, S. Suresh, C.S. Sujith Kumar, Q. Yang, Pool boiling heat transfer enhancement using vertically aligned carbon nanotube coatings on a copper substrate, Appl. Therm. Eng. 99 (2016) 61–71. doi:10.1016/j.applthermaleng.2015.12.081. [11] Z. Kang, L. Wang, Boiling heat transfer on surfaces with 3D-printing microstructures, Exp. Therm. Fluid Sci. 93 (2018) 165–170. doi:10.1016/j.expthermflusci.2017.12.021. [12] S. C. S., Y. Chang, M. Arenales, L.-S. Kuo, Y. Chuang, P.-H. Chen, Experimental investigation on the effect of size and pitch of hydrophobic square patterns on the pool boiling heat transfer performance of cylindrical copper surface, Inventions. 3 (2018) 15. doi:10.3390/inventions3010015. [13] C.-C. Hsu, M.-R. Lee, C.-H. Wu, P.-H. Chen, Effect of interlaced wettability on horizontal copper cylinders in nucleate pool boiling, Appl. Therm. Eng. 112 (2017) 1187–1194. doi:10.1016/j.applthermaleng.2016.10.176. [14] C.-C. Hsu, P.-H. Chen, Surface wettability effects on critical heat flux of boiling heat transfer using nanoparticle coatings, Int. J. Heat Mass Transf. 55 (2012) 3713–3719. doi:10.1016/j.ijheatmasstransfer.2012.03.003. [15] H. Jo, H.S. Ahn, S. Kang, M.H. Kim, A study of nucleate boiling heat transfer on hydrophilic, hydrophobic and heterogeneous wetting surfaces, Int. J. Heat Mass Transf. 54 (2011) 5643–5652. doi:10.1016/j.ijheatmasstransfer.2011.06.001. [16] C.S. Sujith Kumar, G. Udaya Kumar, M.R. Mata Arenales, C.-C. Hsu, S. Suresh, P.-H. Chen, Elucidating the mechanisms behind the boiling heat transfer enhancement using nano-structured surface coatings, Appl. Therm. Eng. 137 (2018) 868–891. doi:10.1016/j.applthermaleng.2018.03.092. [17] G. Liang, I. Mudawar, Review of pool boiling enhancement by surface modification, Int. J. Heat Mass Transf. 128 (2019) 892–933. doi:10.1016/j.ijheatmasstransfer.2018.09.026. [18] J.S. Mehta, S.G. Kandlikar, Pool boiling heat transfer enhancement over cylindrical tubes with water at atmospheric pressure, Part I: Experimental results for circumferential rectangular open microchannels, Int. J. Heat Mass Transf. 64 (2013) 1205–1215. doi:10.1016/j.ijheatmasstransfer.2013.03.087. [19] J.S. Mehta, S.G. Kandlikar, Pool boiling heat transfer enhancement over cylindrical tubes with water at atmospheric pressure, Part II: Experimental results and bubble dynamics for circumferential v-groove and axial rectangular open microchannels, Int. J. Heat Mass Transf. 64 (2013) 1216–1225. doi:10.1016/j.ijheatmasstransfer.2013.04.004. [20] H.J. Cho, J.P. Mizerak, E.N. Wang, Turning bubbles on and off during boiling using charged surfactants, Nat. Commun. 6 (2015) 8599. Https://doi.org/10.1038/ncomms9599. [21] M.R. Pearson, J. Seyed-Yagoobi, EHD conduction-driven enhancement of critical heat flux in pool boiling, Ieee Trans. Ind. Appl. 49 (2013) 1808–1816. doi:10.1109/tia.2013.2262451. [22] I. Kano, Y. Takahashi, Effect of electric field generated by microsized electrode on pool boiling, IEEE Trans. Ind. Appl. 49 (2013) 2382–2387. doi:10.1109/tia.2013.2263213. [23] A. Sur, Y. Lu, C. Pascente, P. Ruchhoeft, D. Liu, Pool boiling heat transfer enhancement with electrowetting, Int. J. Heat Mass Transf. 120 (2018) 202–217. doi:10.1016/j.ijheatmasstransfer.2017.12.029. [24] A. Dinesh, A. Sathyabhama, Effect of compound enhancement technique on pool boiling heat transfer coefficient, Heat Pipe Sci. Technol. An Int. J. 7 (2016) 251–264. doi:10.1615/heatpipescietech.2017019384. [25] A. Sathyabhama, A. Dinesh, Augmentation of heat transfer coefficient in pool boiling using compound enhancement techniques, Appl. Therm. Eng. 119 (2017) 176–188. doi:10.1016/j.applthermaleng.2017.03.029. [26] S.-K. Lee, H.-C. Hsu, W.-H. Tuan, S.-K. Lee, H.-C. Hsu, W.-H. Tuan, Oxidation behavior of copper at a temperature below 300 °C and the methodology for passivation, Mater. Res. 19 (2016) 51–56. doi:10.1590/1980-5373-mr-2015-0139. [27] Y. Nam, Y.S. Ju, Comparative study of copper oxidation schemes and their effects on surface wettability, In: Vol. 10 Heat Transf. Fluid Flows, Therm. Syst. Parts A, B, C, Asme, 2008: Pp. 1833–1838. doi:10.1115/imece2008-67492. [28] P.R. Dominiczak, J.T. Cieśliński, Circumferential temperature distribution during nucleate pool boiling outside smooth and modified horizontal tubes, Exp. Therm. Fluid Sci. 33 (2008) 173–177. doi:10.1016/j.expthermflusci.2008.07.007. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/73334 | - |
dc.description.abstract | Results showing the effect of pool boiling on the surface roughness of copper tubes using deionized water as the working fluid are presented in this paper. To obtain different surface roughness values of each sample, the copper tubes were rotated with an electric rotor and sanded using sandpapers with different grits. The average surface roughness values of the plain copper tubes were in the range 0.032–0.544 µm. All experimental samples were horizontally oriented, and experiments were carried out in ambient conditions up to a moderate heat flux regime (~ 450 kW/m2). Moreover, for a comparative analysis, a sample with a rough surface and hydrophobic patterns was included in this study. Compared with the smoothest surface, the aforementioned rough sample exhibited a heat transfer coefficient that was up to a factor 1.5 higher for the highest evaluated heat flux. These findings show that even small increments in the surface roughness along with the addition of hydrophobic patterns can significantly lower the wall superheat temperature and increase the heat transfer coefficient of copper tubes. Furthermore, supported by high-speed imaging of the experiment, it was observed that increasing the surface roughness caused bubbles to depart when their diameter was larger, and the nucleation site density and bubble departure frequency increased. In contrast, the rough surface with hydrophobic patterns exhibited the best overall enhancement, including the characteristics mentioned above of the rough surfaces along with a uniform distribution of the bubbles around the surface. | zh_TW |
dc.description.provenance | Made available in DSpace on 2021-06-17T07:29:02Z (GMT). No. of bitstreams: 1 -108-R06522322-1.pdf: 6150203 bytes, checksum: 4499d71084d08cdf3bee9b250ece124c (MD5) Previous issue date: 2019 | en |
dc.description.tableofcontents | Master thesis certification by oral defense committee i
Dedication ii Acknowledgements iii Abstract iv Table of Contents v List of figures vii List of tables xi Nomenclature xii Abbreviations xiii 1. INTRODUCTION 1 1.1. Background 1 1.2. Pool boiling curve 2 1.2.1. Natural convection boiling 3 1.2.2. Nucleate boiling 4 1.2.3. Transition boiling 4 1.2.4. Film boiling 5 1.3. Thesis structure 5 2. LITERATURE REVIEW 6 2.1. Passive techniques 6 2.1.1. Surface roughness 6 2.1.2. Coating materials 9 2.1.3. Microchannel surfaces 13 2.2. Active techniques 14 2.3. Combination techniques 16 2.4. Comments in the literature review 17 2.5. Objectives 18 3. EXPERIMENTAL APPROACH 19 3.1. Experimental setup 19 3.2. Surface preparation procedures 23 3.3. Preparation of the polymer mixture 26 3.4. Surface characterization of the experimental samples 27 3.5. Data reduction 31 3.6. Uncertainty analysis 33 3.7. Experimental procedures 35 4. RESULTS AND DISCUSSION 40 4.1. Surface wettability behavior 41 4.2. Wall superheat and heat transfer coefficient enhancement 42 4.3. Circumferential surface temperature difference 46 4.4. Visual representation of the bubble dynamics 50 5. CONCLUSIONS AND SUGGESTIONS FOR FUTURE RESEARCH 55 5.1. Conclusions 55 5.2. Suggestions for future research 56 References 58 Appendices 63 | |
dc.language.iso | en | |
dc.title | 不同表面粗糙度於紅銅圓管對水的池沸騰之影響 | zh_TW |
dc.title | Effects of Varying the Surface Roughness on Copper Tubes in Pool Boiling of Water | en |
dc.type | Thesis | |
dc.date.schoolyear | 107-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 潘國隆(Kuo-Long Pan),張天立(Tien-Li Chang) | |
dc.subject.keyword | surface roughness,hydrophobic pattern,screen printing,wall superheat,boiling heat transfer coefficient,critical heat flux,heterogeneous wettable surface, | zh_TW |
dc.relation.page | 101 | |
dc.identifier.doi | 10.6342/NTU201900716 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2019-06-19 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 機械工程學研究所 | zh_TW |
顯示於系所單位: | 機械工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
-108-R06522322-1.pdf 目前未授權公開取用 | 6.01 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。