請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/36997
標題: | 化學機械研磨之修整加工機制研究分析 Study on Dressing Behaviors in Chemical Mechanical Polishing |
作者: | Kuen-Ren Chen 陳鯤仁 |
指導教授: | 楊宏智(Hong-Tsu Young) |
關鍵字: | 化學機械研磨,鑽石修整器,研磨墊,軌跡分析, Chemical Mechanical Polishing,Diamond Dresser,Pad,Trajectory Analysis, |
出版年 : | 2008 |
學位: | 碩士 |
摘要: | 化學機械研磨為半導體製程當中最常被採用的平坦化技術,研磨墊表面需要適度的以鑽石修整器修整,以維持化學機械研磨製程之穩定性及產能。本研究計算鑽石修整器上所有鑽石刮劃研磨墊之次數分佈,以模擬預測修整過後研磨墊表面之外型。鑽石與研磨墊之相對速度經實驗證實對修整率並無影響,因此統計刮劃次數時並不需要考慮速度的影響。本研究首先模擬不同鑽石分布方式的修整器之修整結果,如環形與全面分布、不同鑽石間距、整齊與不規則排列等。接著探討各種設備上對應之修整參數,如轉速、修整器掃掠之幅度及頻率等對研磨墊外形之影響。另外,本研究定義出一個修整過程的均勻度指標,可用來最佳化掃掠頻率以確保研磨墊各處隨時都被均勻地修整。模擬預測之研磨墊外型亦與實際使用過的研磨墊做比對,兩者之趨勢一致,證實刮劃次數可有效的預測研磨墊外型。根據本研究所建立的模擬程式,使用者可以直接針對設備上可調的參數進行模擬,進而找出最佳的修整參數。 Chemical mechanical polishing (CMP) is the planarization technology most often used for semiconductor processes. The polishing pad needs to be dressed by a dresser to maintain the stability and the throughput of the planarization process. This study simulated and predicted the pad profile by calculating the distribution of scratch numbers of diamonds against the pad. The effect of the relative velocity between a dresser and a pad has been experimentally verified to be insignificant on dressing rate, so the simulation did not take the effect of relative velocity into account. First, different types of dressers, including ring-types and full-type, different pitches and arrangements, were simulated. Then, the effects of different dressing conditions, rotational speeds, sweep amplitudes and frequencies were examined. A uniformity index was defined to optimize the uniformity of dressing process. The simulated pad profile was then compared to the actual pad profiles and results were very similar. According to the simulation model, users can directly modify the parameters that are adjustable in the equipment and find the optimum dressing condition. |
URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/36997 |
全文授權: | 有償授權 |
顯示於系所單位: | 機械工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-97-1.pdf 目前未授權公開取用 | 3.32 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。