請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/34593
標題: | 低伏導管式類比數位轉換器和
採用可適性濾波技術之數位校準方法 Low-voltage Pipelined ADC and A Calibration Method Using Adaptive Filtering Technique |
作者: | Wei-cheng Lin 林偉程 |
指導教授: | 呂學士 |
關鍵字: | 導管式,類比數位轉換器,校準, pipeline,calibration,adc, |
出版年 : | 2006 |
學位: | 碩士 |
摘要: | In recent years, with the rapid growth of information the speed of data rate in communication system needs to be improved. Therefore different architectures of transceiver have been presented for the solution and as the CMOS technology is evolving, those impractical method before now become realizable. In modern trend of SOC, most of the transceiver will adopt a high-speed and high dynamic range ADC in its system block. For example, in the RF system, more emphases are made on the integration and adaptability. For monolithic integration, a homodyne receiver is more suitable. By its feature of channel selection in base-band, the wanted signal channel and detected signal sensitivity can be adapted by using the digital filtering techniques after the zero-IF signal digitized by the ADC. Pipelined ADC is the most suitable architecture since it features of high speed and can have high dynamic range. Besides, with bootstrapping techniques and power optimization, the low voltage operation and low power consumption can be demonstrated.
This thesis will show how to implement a 10-bit pipelined ADC operating under 2.5V supply voltage by using standard TSMC 0.35um CMOS technology and the measurement result. Because the threshold voltage of this technology is not that of the low-threshold voltage process, the design of OPAMP should be careful. The reason is that the NMOS and PMOS in cascade topology are operating near the boundary of saturation which is close to triode region. This may make the OPAMP not have gain high enough. To solve this problem a digital calibration method will be presented. It’s just like an adaptive equalizer to calibrate the nonlinear transfer curve of ADC’s input and output that resulted from non-ideal stage gain. With this method, a ADC suffered from distortion can be compensated so that its linearity will become better. . |
URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/34593 |
全文授權: | 有償授權 |
顯示於系所單位: | 電子工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-95-1.pdf 目前未授權公開取用 | 2.54 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。