請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/19109
標題: | 單電感雙輸出降壓併升壓直流轉直流電源轉換器 Single-Inductor Dual-Output DC-DC Buck/Boost Converter |
作者: | Di-Chi Chou 周帝吉 |
指導教授: | 林宗賢(Tsung-Hsien Lin) |
關鍵字: | 單電感雙輸出直流直流轉換器,降壓轉換器,升壓轉換器, Single-Inductor Dual-Output DC-DC Buck/Boost Converter,Buck Converter,Boost Converter, |
出版年 : | 2016 |
學位: | 碩士 |
摘要: | 本論文中提出了一個單電感雙輸出直流轉直流降壓併升壓轉換器。功率級開關的切換序列有別於傳統單電感雙輸出轉換器,除了三個開關外再加上飛輪(free-wheeling)開關用以防止電感電流逆流導致轉換器整體效能下降。控制迴路方面採用漣波控制機制,因此能提高整體開關的切換頻率進而縮小被動元件的體積,對於未來電源應用在整合電路上有相當的幫助。
此晶片使用台積電0.18微米互補式金氧半製程實現。在1.2伏特的供應電源下,可提供0.95伏特的壓降電壓及1.4伏特的壓升電壓,模擬之能源轉換效率可達80%。 A Single-Inductor Dual-Output (SIDO) DC to DC Buck/Boost Converter topology is proposed. The power stage switching sequence is different from conventional type. In addition to three switches, a freewheel switch is used to prevent negative inductor current occurring and degrading the power efficiency. The converter uses ripple-based control method, which facilitates high switching frequency and decreasing the passive components volume. The chip is fabricated in 0.18 μm CMOS, the proposed SIDO DC-DC Buck/Boost Converter can produce 0.95 V buck voltage with 1.4 V boost voltage. The power transfer efficiency could reach 80% in simulation. |
URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/19109 |
DOI: | 10.6342/NTU201602238 |
全文授權: | 未授權 |
顯示於系所單位: | 電子工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-105-1.pdf 目前未授權公開取用 | 6.16 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。