請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/19109
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 林宗賢(Tsung-Hsien Lin) | |
dc.contributor.author | Di-Chi Chou | en |
dc.contributor.author | 周帝吉 | zh_TW |
dc.date.accessioned | 2021-06-08T01:45:23Z | - |
dc.date.copyright | 2016-08-25 | |
dc.date.issued | 2016 | |
dc.date.submitted | 2016-08-12 | |
dc.identifier.citation | [1] R. W. Erickson and D. Maksimovic, Fundamentals of Power Electronics. Norwell, MA: Kluwer, 2001.
[2] M. K. Kazimierczuk, Pulse-width Modulated DC–DC Power Converters, New York: John Wiley &Sons, 2008. [3] C. Huang and P. K. T. Mok, “Cross-Regulation-Suppression Control Scheme for CCM Single-Inductor-Dual-Output Buck Converter with Ordered-Power-Distributive Control,” IEEE International Symposium on Circuits and Systems, pp. 1612-1615, May 2011. [4] M. Dongsheng, K. Wing-Hung, and T. Chi-Ying, “A pseudo-CCM/DCM SIMO switching converter with freewheel switching,” IEEE J. Solid-State Circuits, vol. 38, no. 6, pp. 1007-1014, June 2003. [5] D. Ma, W. H. Ki, C. Y. Tsui and P. K. T. Mok, “A 1.8 V single-inductor dual-output switching converter for power reduction techniques,” IEEE Symposium on VLSI Circuits, pp. 137-140, June 2001. [6] J. Jingbin and L. K. Nang, “A single-inductor dual-output pseudo-DCM/CCM buck and boost converter with adaptive DC current compensation,” IEEE International Symposium on Circuits and Systems, pp. 2641-2644, 2009. [7] H. Siew Kuok, N. Culp, C. Jun, and F. Maloberti, “A PWM dual-output DC/DC boost converter in a 0.13um CMOS technology for cellularphone backlight application,” IEEE ESSCIRC, pp. 81-84, 2005. [8] K. Suet-Chui, L. Yat-Hei, and K. Wing-Hung, “Integrated charge-control single-inductor dual-output step-up/step-down converter,” IEEE International Symposium on Circuits and Systems, pp. 3071-3074, 2009. [9] E. Bonizzoni, F. Borghetti, P. Malcovati, F. Maloberti, and B. Niessen, “A 200mA 93% Peak Efficiency Single-Inductor Dual-Output DC-DC Buck Converter,” IEEE International Solid-State Circuits Conference, pp. 526-619, 2007. [10] C. Chang-Seok, L. Hanh-Phuc, L. Kwang-Chan, L. Min-Chul, C. Gyu-Hyeong, and C. Gyu-Ha, “A Single-Inductor Step-Up DC-DC Switching Converter with Bipolar Outputs for Active Matrix OLED Mobile Display Panels,” IEEE International Solid-State Circuits Conference, pp. 136-592, 2007 [11] L. Hanh-Phuc, C. Chang-Seok, L. Kwang-Chan, W. Se-Won, C. Gyu-Ha, and C. Gyu-Hyeong, “A Single-Inductor Switching DC-DC Converter With Five Outputs and Ordered Power-Distributive Control,” IEEE J. Solid-State Circuits, vol. 42, pp. 2706-2714, 2007. [12] M. Belloni, E. Bonizzoni, E. Kiseliovas, P. Malcovati, F. Maloberti, T. Peltola, and T. Teppo, “A 4-Output Single-Inductor DC-DC Buck Converter with Self-Boosted Switch Drivers and 1.2A Total Output Current,” IEEE International Solid-State Circuits Conference, pp. 444-626, 2008. [13] M. Belloni, E. Bonizzoni, and F. Maloberti, “On the design of single-inductor multiple-output DC-DC buck converters,” IEEE International Symposium on Circuits and Systems, pp. 3049-3052, 2008. [14] H. Ming-Hsin, C. Ke-Horng, and W. Wei-Hsin, “Single-inductor dual-output DC-DC converters with high light-load efficiency and minimized cross-regulation for portable devices,” IEEE Symposium on VLSI Circuits, pp. 132-133, 2008. [15] C. Chang-Seok, L. Hanh-Phuc, L. Kwang-Chan, C. Gyu-Ha, and C. Gyu-Hyeong, “A Single-Inductor Step-Up DC-DC Switching Converter With Bipolar Outputs for Active Matrix OLED Mobile Display Panels,” IEEE J. Solid-State Circuits, vol. 44, pp. 509-524, 2009. [16] A. Pizzutelli and M. Ghioni, “Novel control technique for single inductor multiple output converters operating in CCM with reduced cross-regulation,” IEEE APEC, pp. 1502-1507, 2008. [17] Y. H. Ko, et al., “Non-Load-Balance-Dependent High Efficiency Single-Inductor Multiple-Output (SIMO) DC-DC Converters,” IEEE CICC, pp. 1-4, 2012. [18] Y.-H. Lee, et al., “Minimized Transient and Steady-State Cross Dual-Output (SIDO) Step-Down DC-DC Converter,” IEEE J. Solid-State Circuits, vol. 46, no. 11, pp. 2488–2499, Nov. 2011. [19] S. Kyoung-Sik, W. Young-Jin, C. Gyu-Hyeong, G. Gyu-Ha, and L. Jae-Woo, “A Synchronous Multioutput Step-Up/Down DC-DC Converter With Return Current Control,” IEEE Trans. Circuits Syst. - II, vol. 56, pp. 210-214, 2009. [20] H. Ming-Hsin and C. Ke-Horng, “Single-Inductor Multi-Output (SIMO) DC-DC Converters With High Light-Load Efficiency and Minimized Cross-Regulation for Portable Devices,” IEEE J. Solid-State Circuits, vol. 44, no.4, pp. 1099-1111, Apr. 2009. [21] K.-S. Seol, Y.-J. Woo, G.-H. Cho, G.-H. Cho, J.-W. Lee, and S.-i. Kim, “Multiple-output step-up/down switching DC-DC converter with vestigial current control,” IEEE International Symposium on Circuits and Systems, pp. 442-443, 2009. [22] C.F. Lee, and K.T. Mok, “A Monolithic Current-Mode CMOS DC-DC Converter with On-Chip Current-Sensing Technique,” IEEE J. Solid-State Circuits, vol. 39, no. 1, pp. 3-14, Jan. 2004. [23] H.-W. Chang, et al., “Integrated single-inductor buck-boost or boost-boost DC-DC converter with power-distributive control,” IEEE PEDS, pp. 1184-1187, 2009. [24] W. Xu, et al., “A 90% Peak Efficiency Single-Inductor Dual-Output Buck-Boost Converter with Extended-PWM Control,” IEEE International Solid-State Circuits Conference, pp. 393- 395, 2011. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/19109 | - |
dc.description.abstract | 本論文中提出了一個單電感雙輸出直流轉直流降壓併升壓轉換器。功率級開關的切換序列有別於傳統單電感雙輸出轉換器,除了三個開關外再加上飛輪(free-wheeling)開關用以防止電感電流逆流導致轉換器整體效能下降。控制迴路方面採用漣波控制機制,因此能提高整體開關的切換頻率進而縮小被動元件的體積,對於未來電源應用在整合電路上有相當的幫助。
此晶片使用台積電0.18微米互補式金氧半製程實現。在1.2伏特的供應電源下,可提供0.95伏特的壓降電壓及1.4伏特的壓升電壓,模擬之能源轉換效率可達80%。 | zh_TW |
dc.description.abstract | A Single-Inductor Dual-Output (SIDO) DC to DC Buck/Boost Converter topology is proposed. The power stage switching sequence is different from conventional type. In addition to three switches, a freewheel switch is used to prevent negative inductor current occurring and degrading the power efficiency. The converter uses ripple-based control method, which facilitates high switching frequency and decreasing the passive components volume.
The chip is fabricated in 0.18 μm CMOS, the proposed SIDO DC-DC Buck/Boost Converter can produce 0.95 V buck voltage with 1.4 V boost voltage. The power transfer efficiency could reach 80% in simulation. | en |
dc.description.provenance | Made available in DSpace on 2021-06-08T01:45:23Z (GMT). No. of bitstreams: 1 ntu-105-R00943133-1.pdf: 6307751 bytes, checksum: e4e1f2d68b189eee744511788d8ad8ee (MD5) Previous issue date: 2016 | en |
dc.description.tableofcontents | Chapter 1
Introduction 1 1.1 RESEARCH MOTIVATION 1 1.2 THESIS ORGANIZATION 3 Chapter 2 Background on Single-Inductor Dual-Outputs DC-DC Converter 5 2.1 A BRIEF OVERVIEW OF SWITCHING TYPE DC-DC CONVERTER 5 2.2 BUCK CONVERTER 5 2.2.1 Overall Topology of Power Stage 5 2.2.2 CCM and DCM Operation 6 2.2.2.1 Continuous Conduction Mode 6 2.2.2.2 Discontinuous Conduction Mode 9 2.3 BOOST CONVERTER 10 2.3.1 Overall Topology of Power Stage 10 2.3.2 CCM and DCM Operation 11 2.3.2.1 Continuous Conduction Mode 12 2.3.2.2 Discontinuous Conduction Mode 15 2.4 SIDO CONVERTER 15 2.4.1 Conventional Control Schemes of a SIDO Converter [3] 16 2.4.2 Prior Arts of SIDO or SIMO Converter 17 2.4.3 General Specifications for a SIDO Converter 23 2.4.3.1 Load Regulation 23 2.4.3.2 Cross Regulation Effect 23 2.4.3.3 Conduction Loss 24 2.4.3.4 Switching Loss 24 2.4.3.5 Efficiency 25 Chapter 3 Proposed Single-Inductor Dual-Output DC-DC Converter with Ripple-Based Control Method 27 3.1 INTRODUCTION 27 3.2 PROPOSED SIDO CONVERTER ARCHITECTURE 27 3.2.1 Switch of Sequence of the Power Stage 28 3.2.2 Control Loop Architecture with Power Stage 30 3.2.3 System Simulation Results 37 3.2.4 Load Current Unbalance Condition 41 3.3 CIRCUITS DESIGN 43 3.3.1 Power MOS Design 43 3.3.2 Comparator Design 44 3.3.3 SR-Latch 46 3.3.4 Edge Detector 47 3.3.5 Comparison Table 48 Chapter 4 Measurement Results 49 4.1 PCB PRODUCTION 49 4.2 MEASUREMENT SETUP 50 4.3 MEASUREMENT RESULTS 52 Chapter 5 Conclusions and Future Work 59 5.1 CONCLUSIONS 59 5.2 FUTURE WORK 59 5.2.1 Power Switches 59 5.2.2 Feedback Loop about System Stability 59 5.2.3 Controlling Method 60 References 61 | |
dc.language.iso | en | |
dc.title | 單電感雙輸出降壓併升壓直流轉直流電源轉換器 | zh_TW |
dc.title | Single-Inductor Dual-Output DC-DC Buck/Boost Converter | en |
dc.type | Thesis | |
dc.date.schoolyear | 104-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 黃柏鈞(Po-Chiun Huang),曾英哲(Ying-Che Tseng),陳信樹(Hsin-Shu Chen) | |
dc.subject.keyword | 單電感雙輸出直流直流轉換器,降壓轉換器,升壓轉換器, | zh_TW |
dc.subject.keyword | Single-Inductor Dual-Output DC-DC Buck/Boost Converter,Buck Converter,Boost Converter, | en |
dc.relation.page | 63 | |
dc.identifier.doi | 10.6342/NTU201602238 | |
dc.rights.note | 未授權 | |
dc.date.accepted | 2016-08-13 | |
dc.contributor.author-college | 電機資訊學院 | zh_TW |
dc.contributor.author-dept | 電子工程學研究所 | zh_TW |
顯示於系所單位: | 電子工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-105-1.pdf 目前未授權公開取用 | 6.16 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。