Skip navigation

DSpace

機構典藏 DSpace 系統致力於保存各式數位資料(如:文字、圖片、PDF)並使其易於取用。

點此認識 DSpace
DSpace logo
English
中文
  • 瀏覽論文
    • 校院系所
    • 出版年
    • 作者
    • 標題
    • 關鍵字
    • 指導教授
  • 搜尋 TDR
  • 授權 Q&A
    • 我的頁面
    • 接受 E-mail 通知
    • 編輯個人資料
  1. NTU Theses and Dissertations Repository
  2. 工學院
  3. 應用力學研究所
請用此 Handle URI 來引用此文件: http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/78359
標題: 常壓介電質放電噴射電漿改質聚苯胺-石墨烯-殼聚醣軟性超級電容及紙基超級電容製程開發

Atmospheric-pressure dielectric-barrier-discharge jet modified polyaniline-reduced graphene oxide-chitosan flexible supercapacitors and fabrication process development of paper-based supercapacitors
作者: Jui-Chen Hsin
辛睿宸
指導教授: 陳建彰(Jian-Zhang Chen)
關鍵字: 超級電容,聚苯胺,還原氧化石墨烯,殼聚醣,介電質放電噴射電漿,常壓噴射電漿,
Supercapacitor,Polyaniline,Reduced graphene oxide,Chitosan,Dielectric barrier discharge,Atmospheric-pressure plasma,
出版年 : 2020
學位: 碩士
摘要: 此研究主要是使用碳纖維布作為軟性超級電容的電極,使用氮氣電弧式常壓噴射電漿在基板溫度520℃將碳纖維布表面處理30秒後,網印塗覆上還原氧化石墨烯-聚苯胺-殼聚醣的奈米複合材料,再使用氬氣介電質放電噴射電漿,在不同處理次數與基板溫度40℃下,對表面材料進行改質,最後均勻塗覆上凝膠態硫酸電解液,製作成一組超級電容。另外,亦有研究以發泡鎳與纖維素紙作為基材之超級電容。經由掃描式電子顯微鏡 (SEM),可以觀察到還原氧化石墨烯、聚苯胺、殼聚醣的奈米複合材料皆均勻分布在碳纖維布上,而由X-射線繞射儀 (XRD)與拉曼光譜儀 (Raman spectroscopy)觀測到在氬氣介電質放電噴射電漿處理後,材料本身之結構皆沒有明顯的改變。由X-射線光電子能譜儀 (XPS)分析處理前後材料表面的化學組成,利用水接觸角儀 (WCA)測量後,可以發現到在氬氣介電質放電噴射電漿處理後,材料表面之親水性鍵結增加,使得親水性上升,可與凝膠態硫酸電解液有更好的接合,進而提升超級電容之容量。另外,亦有探討電漿處理與熱效應對於碳纖維布之親水性影響。在恆電流充電放電測量法 (Galvanostatic Charge-Discharge Test)與循環伏安法(Cyclic Voltammetry Test)下,可以得到在經過氬氣介電質放電噴射電漿處理後,超級電容具有較大之電雙層電容及法拉第電容,電容值皆提高了150 ~ 300%左右,而在機械式彎曲測試與長時間充放電的實驗下,軟性超級電容經過五百次曲率半徑5 mm的機械彎曲與1萬次充放電後,電容值沒有明顯的降低,顯示出軟性超級電容具有良好的機械穩定性和長時間充放電穩定性。經由此研究的結果顯示,在沒有給予樣品加熱處理下,單純以低溫(~40°C)氬氣介電質放電噴射電漿的高反應性離子,便可以改變碳纖維布上還原氧化石墨烯-聚苯胺-殼聚醣複合材料的性質,使軟性超級電容之性能有進一步的提升。
We used carbon fiber cloth as the electrodes of the flexible supercapacitors. The carbon cloth was treated by nitrogen arc atmospheric-pressure plasma jet (APPJ) at a substrate temperature of 520℃ for 30 s. Following which reduced graphene oxide (rGO)-polyaniline (PANI)-chitosan (CS) pastes was screen-printed on APPJ-treated carbon cloth. Ar dielectric barrier discharge jet (DBDjet) was used to modify the material at a substrate temperature of ~40° C with zero, one, and two scans. Through the scanning electron microscopy, it can be observed that the nanocomposite materials of rGO-PANI-CS are uniformly distributed on the carbon cloth. The structure of the rGO-PANI-CS did not change significantly after the Ar DBDjet treatment. Improved hydrophilicity after DBDjet treatment increased capacity of the supercapacitor, as evidenced by X-ray photoelectron spectroscopy and water contact angle measurement. Galvanostatic charging-discharging (GCD) and cyclic voltammetry (CV) results indicate that Ar DBDjet treatment improves the capacitance by 150 ~ 300%. The flexible supercapacitor shows good stability under the mechanical bending test and long-term charging and discharging experiments. Our results show that without substantial heating, only reactive plasma species of Ar DBDjet can substantially alter the properties of rGO-PANI-CS nanocomposites on carbon cloth to improve the performance of supercapacitors
URI: http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/78359
DOI: 10.6342/NTU202001821
全文授權: 有償授權
電子全文公開日期: 2023-07-30
顯示於系所單位:應用力學研究所

文件中的檔案:
檔案 大小格式 
U0001-2407202013150800.pdf
  未授權公開取用
9.81 MBAdobe PDF
顯示文件完整紀錄


系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。

社群連結
聯絡資訊
10617臺北市大安區羅斯福路四段1號
No.1 Sec.4, Roosevelt Rd., Taipei, Taiwan, R.O.C. 106
Tel: (02)33662353
Email: ntuetds@ntu.edu.tw
意見箱
相關連結
館藏目錄
國內圖書館整合查詢 MetaCat
臺大學術典藏 NTU Scholars
臺大圖書館數位典藏館
本站聲明
© NTU Library All Rights Reserved