Skip navigation

DSpace JSPUI

DSpace preserves and enables easy and open access to all types of digital content including text, images, moving images, mpegs and data sets

Learn More
DSpace logo
English
中文
  • Browse
    • Communities
      & Collections
    • Publication Year
    • Author
    • Title
    • Subject
    • Advisor
  • Search TDR
  • Rights Q&A
    • My Page
    • Receive email
      updates
    • Edit Profile
  1. NTU Theses and Dissertations Repository
  2. 工學院
  3. 應用力學研究所
Please use this identifier to cite or link to this item: http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/78359
Title: 常壓介電質放電噴射電漿改質聚苯胺-石墨烯-殼聚醣軟性超級電容及紙基超級電容製程開發

Atmospheric-pressure dielectric-barrier-discharge jet modified polyaniline-reduced graphene oxide-chitosan flexible supercapacitors and fabrication process development of paper-based supercapacitors
Authors: Jui-Chen Hsin
辛睿宸
Advisor: 陳建彰(Jian-Zhang Chen)
Keyword: 超級電容,聚苯胺,還原氧化石墨烯,殼聚醣,介電質放電噴射電漿,常壓噴射電漿,
Supercapacitor,Polyaniline,Reduced graphene oxide,Chitosan,Dielectric barrier discharge,Atmospheric-pressure plasma,
Publication Year : 2020
Degree: 碩士
Abstract: 此研究主要是使用碳纖維布作為軟性超級電容的電極,使用氮氣電弧式常壓噴射電漿在基板溫度520℃將碳纖維布表面處理30秒後,網印塗覆上還原氧化石墨烯-聚苯胺-殼聚醣的奈米複合材料,再使用氬氣介電質放電噴射電漿,在不同處理次數與基板溫度40℃下,對表面材料進行改質,最後均勻塗覆上凝膠態硫酸電解液,製作成一組超級電容。另外,亦有研究以發泡鎳與纖維素紙作為基材之超級電容。經由掃描式電子顯微鏡 (SEM),可以觀察到還原氧化石墨烯、聚苯胺、殼聚醣的奈米複合材料皆均勻分布在碳纖維布上,而由X-射線繞射儀 (XRD)與拉曼光譜儀 (Raman spectroscopy)觀測到在氬氣介電質放電噴射電漿處理後,材料本身之結構皆沒有明顯的改變。由X-射線光電子能譜儀 (XPS)分析處理前後材料表面的化學組成,利用水接觸角儀 (WCA)測量後,可以發現到在氬氣介電質放電噴射電漿處理後,材料表面之親水性鍵結增加,使得親水性上升,可與凝膠態硫酸電解液有更好的接合,進而提升超級電容之容量。另外,亦有探討電漿處理與熱效應對於碳纖維布之親水性影響。在恆電流充電放電測量法 (Galvanostatic Charge-Discharge Test)與循環伏安法(Cyclic Voltammetry Test)下,可以得到在經過氬氣介電質放電噴射電漿處理後,超級電容具有較大之電雙層電容及法拉第電容,電容值皆提高了150 ~ 300%左右,而在機械式彎曲測試與長時間充放電的實驗下,軟性超級電容經過五百次曲率半徑5 mm的機械彎曲與1萬次充放電後,電容值沒有明顯的降低,顯示出軟性超級電容具有良好的機械穩定性和長時間充放電穩定性。經由此研究的結果顯示,在沒有給予樣品加熱處理下,單純以低溫(~40°C)氬氣介電質放電噴射電漿的高反應性離子,便可以改變碳纖維布上還原氧化石墨烯-聚苯胺-殼聚醣複合材料的性質,使軟性超級電容之性能有進一步的提升。
We used carbon fiber cloth as the electrodes of the flexible supercapacitors. The carbon cloth was treated by nitrogen arc atmospheric-pressure plasma jet (APPJ) at a substrate temperature of 520℃ for 30 s. Following which reduced graphene oxide (rGO)-polyaniline (PANI)-chitosan (CS) pastes was screen-printed on APPJ-treated carbon cloth. Ar dielectric barrier discharge jet (DBDjet) was used to modify the material at a substrate temperature of ~40° C with zero, one, and two scans. Through the scanning electron microscopy, it can be observed that the nanocomposite materials of rGO-PANI-CS are uniformly distributed on the carbon cloth. The structure of the rGO-PANI-CS did not change significantly after the Ar DBDjet treatment. Improved hydrophilicity after DBDjet treatment increased capacity of the supercapacitor, as evidenced by X-ray photoelectron spectroscopy and water contact angle measurement. Galvanostatic charging-discharging (GCD) and cyclic voltammetry (CV) results indicate that Ar DBDjet treatment improves the capacitance by 150 ~ 300%. The flexible supercapacitor shows good stability under the mechanical bending test and long-term charging and discharging experiments. Our results show that without substantial heating, only reactive plasma species of Ar DBDjet can substantially alter the properties of rGO-PANI-CS nanocomposites on carbon cloth to improve the performance of supercapacitors
URI: http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/78359
DOI: 10.6342/NTU202001821
Fulltext Rights: 有償授權
metadata.dc.date.embargo-lift: 2023-07-30
Appears in Collections:應用力學研究所

Files in This Item:
File SizeFormat 
U0001-2407202013150800.pdf
  Restricted Access
9.81 MBAdobe PDF
Show full item record


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

社群連結
聯絡資訊
10617臺北市大安區羅斯福路四段1號
No.1 Sec.4, Roosevelt Rd., Taipei, Taiwan, R.O.C. 106
Tel: (02)33662353
Email: ntuetds@ntu.edu.tw
意見箱
相關連結
館藏目錄
國內圖書館整合查詢 MetaCat
臺大學術典藏 NTU Scholars
臺大圖書館數位典藏館
本站聲明
© NTU Library All Rights Reserved