Skip navigation

DSpace

機構典藏 DSpace 系統致力於保存各式數位資料(如:文字、圖片、PDF)並使其易於取用。

點此認識 DSpace
DSpace logo
English
中文
  • 瀏覽論文
    • 校院系所
    • 出版年
    • 作者
    • 標題
    • 關鍵字
  • 搜尋 TDR
  • 授權 Q&A
    • 我的頁面
    • 接受 E-mail 通知
    • 編輯個人資料
  1. NTU Theses and Dissertations Repository
  2. 電機資訊學院
  3. 光電工程學研究所
請用此 Handle URI 來引用此文件: http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/96322
標題: 從一個氮化銦鎵/氮化鎵量子井結構到塞入銀奈米管內膠體量子點的福斯特共振能量轉換行為
Behaviors of the Förster Resonance Energy Transfer from an InGaN/GaN Quantum-well Structure into Inserted Colloidal Quantum Dots in an Ag Nanotube
作者: 呂毓豪
Yu-Hao Lu
指導教授: 楊志忠
Chih-Chung Yang
關鍵字: 銀奈米管,氮化銦鎵/氮化鎵量子井,膠體量子點,福斯特共振能量轉移,奈米腔體效應,表面電漿子耦合,二次濺鍍,
Ag nanotube,InGaN/GaN quantum well,colloidal quantum dot,Förster resonance energy transfer,nanoscale-cavity effect,surface plasmon coupling,secondary sputtering,
出版年 : 2024
學位: 碩士
摘要: 本研究是透過在氮化銦鎵/氮化鎵量子井結構上製作銀奈米管,並將膠體量子點的光阻溶液塞入其中,來提升量子井結構向量子點的福斯特共振能量轉移效率。研究顯示這種金屬奈米管設計相較於將量子點置於沒有金屬的氮化鎵奈米洞內,前者的能量轉移效率顯著提升。這樣的結果是因為具金屬側壁的奈米洞中產生了更強的奈米腔體效應,並且表面電漿子耦合也產生關鍵作用。銀奈米管的製作過程包括在量子井模板上製作表面奈米洞,接著沉積指定厚度的銀,然後通過氬離子反應離子蝕刻進行二次濺鍍,最後塞入量子點的光阻溶液。我們比較不同銀沉積厚度及相應不同二次濺鍍時間的樣品,發現銀沉積厚度為30奈米時,可達到最高的福斯特共振能量轉移效率。
By fabricating an Ag nanotube above an InGaN/GaN quantum-well (QW) structure and inserting a photoresist solution of colloidal quantum dot (QD) inside, the efficiency of the Förster resonance energy transfer (FRET) from the QW structure into the QD can be enhanced, when compared with that with QD in a GaN nanohole, i.e., no metal deposition. Such a result is caused by the stronger nanoscale-cavity effect in a nanohole of a metallic sidewall and the surface plasmon coupling with the sidewall metal. The Ag nanotube is implemented through the steps of the surface nanohole fabrication on a QW template, the Ag deposition of a designated thickness, the secondary sputtering via reactive ion etching with Ar ions, and the insertion of the photoresist solution of QD. By comparing the samples of different Ag deposition thicknesses and correspondingly different secondary sputtering durations, it is found that the Ag thickness of 30 nm leads to the highest FRET efficiency.
URI: http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/96322
DOI: 10.6342/NTU202404663
全文授權: 同意授權(限校園內公開)
顯示於系所單位:光電工程學研究所

文件中的檔案:
檔案 大小格式 
ntu-113-1.pdf
授權僅限NTU校內IP使用(校園外請利用VPN校外連線服務)
3.16 MBAdobe PDF檢視/開啟
顯示文件完整紀錄


系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。

社群連結
聯絡資訊
10617臺北市大安區羅斯福路四段1號
No.1 Sec.4, Roosevelt Rd., Taipei, Taiwan, R.O.C. 106
Tel: (02)33662353
Email: ntuetds@ntu.edu.tw
意見箱
相關連結
館藏目錄
國內圖書館整合查詢 MetaCat
臺大學術典藏 NTU Scholars
臺大圖書館數位典藏館
本站聲明
© NTU Library All Rights Reserved