請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/91952
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 楊哲人 | zh_TW |
dc.contributor.advisor | Jer-Ren Yang | en |
dc.contributor.author | 邱柏翰 | zh_TW |
dc.contributor.author | Po-Han Chiu | en |
dc.date.accessioned | 2024-02-27T16:11:57Z | - |
dc.date.available | 2024-02-28 | - |
dc.date.copyright | 2022-09-14 | - |
dc.date.issued | 2022 | - |
dc.date.submitted | 2002-01-01 | - |
dc.identifier.citation | 1. Yeh, J.W., et al., Nanostructured High-Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes. Advanced Engineering Materials, 2004. 6(5): p. 299-303.
2. Cantor, B., et al., Microstructural development in equiatomic multicomponent alloys. Materials Science and Engineering: A, 2004. 375-377: p. 213-218. 3. Miracle, D.B. and O.N. Senkov, A critical review of high entropy alloys and related concepts. Acta Materialia, 2017. 122: p. 448-511. 4. Zhang, Y., et al., Microstructures and properties of high-entropy alloys. Progress in Materials Science, 2014. 61: p. 1-93. 5. Jien-Wei, Y., Recent progress in high entropy alloys. Ann. Chim. Sci. Mat, 2006. 31(6): p. 633-648. 6. Yeh, J.-W., Alloy Design Strategies and Future Trends in High-Entropy Alloys. JOM, 2013. 65(12): p. 1759-1771. 7. Kubilay, R.E. and W.A. Curtin, Theory of twin strengthening in fcc high entropy alloys. Acta Materialia, 2021. 216: p. 117119. 8. Mishra, R., N. Kumar, and M. Komarasamy, Lattice strain framework for plastic deformation in complex concentrated alloys including high entropy alloys. Materials Science and Technology, 2015. 31(10): p. 1259-1263. 9. Kumar, N., et al., High strain-rate compressive deformation behavior of the Al0.1CrFeCoNi high entropy alloy. Materials & Design, 2015. 86: p. 598-602. 10. Cahn, R.W. and P. Haasen, Physical metallurgy. Vol. 1. 1996: Elsevier. 11. Zhang, Y., et al., Solid-Solution Phase Formation Rules for Multi-component Alloys. Advanced Engineering Materials, 2008. 10(6): p. 534-538. 12. Zaddach, A.J., et al., Mechanical Properties and Stacking Fault Energies of NiFeCrCoMn High-Entropy Alloy. JOM, 2013. 65(12): p. 1780-1789. 13. Hammer, B., et al., Stacking fault energies in aluminium. Journal of Physics: Condensed Matter, 1992. 4(50): p. 10453. 14. Carter, C. and S. Holmes, The stacking-fault energy of nickel. The Philosophical Magazine: A Journal of Theoretical Experimental and Applied Physics, 1977. 35(5): p. 1161-1172. 15. Wu, Z., et al., Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures. Acta Materialia, 2014. 81: p. 428-441. 16. Li, Z., et al., Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off. Nature, 2016. 534(7606): p. 227-230. 17. Wei, D., et al., Novel Co-rich high performance twinning-induced plasticity (TWIP) and transformation-induced plasticity (TRIP) high-entropy alloys. Scripta Materialia, 2019. 165: p. 39-43. 18. Otto, F., et al., The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy. Acta Materialia, 2013. 61(15): p. 5743-5755. 19. Gali, A. and E.P. George, Tensile properties of high-and medium-entropy alloys. Intermetallics, 2013. 39: p. 74-78. 20. Wu, Z., et al., Recovery, recrystallization, grain growth and phase stability of a family of FCC-structured multi-component equiatomic solid solution alloys. Intermetallics, 2014. 46: p. 131-140. 21. Hammer, B., et al., Stacking fault energies in aluminium. Journal of Physics: Condensed Matter, 1992. 4(50): p. 10453-10460. 22. Zhu, Y.T., X.Z. Liao, and X.L. Wu, Deformation twinning in nanocrystalline materials. Progress in Materials Science, 2012. 57(1): p. 1-62. 23. Gleiter, H., The formation of annealing twins. Acta Metallurgica, 1969. 17(12): p. 1421-1428. 24. Bollmann, W., Crystal defects and crystalline interfaces. 2012: Springer Science & Business Media. 25. Jin, Y., Annealing twin formation mechanism. 2014, Ecole Nationale Supérieure des Mines de Paris. 26. Dash, S. and N. Brown, An investigation of the origin and growth of annealing twins. Acta Metallurgica, 1963. 11(9): p. 1067-1075. 27. Meyers, M.A. and L.E. Murr, A model for the formation of annealing twins in F.C.C. metals and alloys. Acta Metallurgica, 1978. 26(6): p. 951-962. 28. Mahajan, S., et al., Formation of annealing twins in f.c.c. crystals. Acta Materialia, 1997. 45(6): p. 2633-2638. 29. Liu, X., et al., Grain size dependence of the twin length fraction in nanocrystalline Cu thin films via transmission electron microscopy based orientation mapping. Journal of Materials Research, 2015. 30(4): p. 528-537. 30. Gutierrez-Urrutia, I., et al. Microstructure-twinning relations in beta-Ti alloys. in MATEC Web of Conferences. 2020. EDP Sciences. 31. Form, W., G. Gindraux, and V. Mlyncar, Density of annealing twins. Metal Science, 1980. 14(1): p. 16-20. 32. Chen, J., et al., Grain size dependence of twinning behaviors and resultant cryogenic impact toughness in high manganese austenitic steel. Journal of Materials Research and Technology, 2021. 10: p. 175-187. 33. Pande, C., M. Imam, and B. Rath, Study of annealing twins in FCC metals and alloys. Metallurgical transactions A, 1990. 21(11): p. 2891-2896. 34. Cahoon, J., Q. Li, and N. Richards, Microstructural and processing factors influencing the formation of annealing twins. Materials science and engineering: a, 2009. 526(1-2): p. 56-61. 35. Jin, Y., et al., Annealing twin development during recrystallization and grain growth in pure nickel. Materials Science and Engineering: A, 2014. 597: p. 295-303. 36. Jin, Y., et al., Formation of Annealing Twins during Recrystallization and Grain Growth in 304L Austenitic Stainless Steel. Materials Science Forum, 2013. 753: p. 113 - 116. 37. Field, D., et al., The role of annealing twins during recrystallization of Cu. Acta materialia, 2007. 55(12): p. 4233-4241. 38. Wang, W., et al., Influence of stored energy on twin formation during primary recrystallization. Materials Science and Engineering: A, 2014. 589: p. 112-118. 39. Venables, J.A., Deformation twinning in face-centred cubic metals. Philosophical Magazine, 1961. 6(63): p. 379-396. 40. Christian, J.W. and S. Mahajan, Deformation twinning. Progress in materials science, 1995. 39(1-2): p. 1-157. 41. De Cooman, B.C., Y. Estrin, and S.K. Kim, Twinning-induced plasticity (TWIP) steels. Acta Materialia, 2018. 142: p. 283-362. 42. Laplanche, G., et al., Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy. Acta Materialia, 2016. 118: p. 152-163. 43. Blewitt, T.H., R.R. Coltman, and J.K. Redman, Low‐Temperature Deformation of Copper Single Crystals. Journal of Applied Physics, 1957. 28: p. 651-660. 44. Moon, J., et al., Microstructure and Mechanical Properties of High-Entropy Alloy Co20Cr26Fe20Mn20Ni14 Processed by High-Pressure Torsion at 77 K and 300 K. Scientific Reports, 2018. 8(1): p. 11074. 45. Meyers, M.A., et al., Shear localization in dynamic deformation of materials: microstructural evolution and self-organization. Materials Science and Engineering: A, 2001. 317(1-2): p. 204-225. 46. Laplanche, G., et al., Reasons for the superior mechanical properties of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi. Acta Materialia, 2017. 128: p. 292-303. 47. Park, J.M., et al., Strain rate effects of dynamic compressive deformation on mechanical properties and microstructure of CoCrFeMnNi high-entropy alloy. Materials Science and Engineering: A, 2018. 719: p. 155-163. 48. Tsai, S.-P., et al., High-entropy CoCrFeMnNi alloy subjected to high-strain-rate compressive deformation. Materials Characterization, 2019. 147: p. 193-198. 49. Sun, S.J., et al., Transition of twinning behavior in CoCrFeMnNi high entropy alloy with grain refinement. Materials Science and Engineering: A, 2018. 712: p. 603-607. 50. El-Danaf, E., S.R. Kalidindi, and R.D. Doherty, Influence of grain size and stacking-fault energy on deformation twinning in fcc metals. Metallurgical and Materials Transactions A, 1999. 30(5): p. 1223-1233. 51. Liao, X., et al., Grain-size effect on the deformation mechanisms of nanostructured copper processed by high-pressure torsion. Journal of applied physics, 2004. 96(1): p. 636-640. 52. Chen, P.-J., Mechanical Property and Microstructure of Cryogenic Temperature and High -stain-rate Compressive Deformation in the FeCoNiCrMn High-entropy Alloy. 2019. 53. Raabe, D., Recovery and recrystallization: phenomena, physics, models, simulation. Physical Metallurgy, 2014: p. 2291-2397. 54. Bhadeshia, H.K.D.H., Worked examples in the geometry of crystals. 2006: Institute of Metals. 55. Liu, S.F., et al., Stacking fault energy of face-centered-cubic high entropy alloys. Intermetallics, 2018. 93: p. 269-273. | - |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/91952 | - |
dc.description.abstract | FCC系列之高熵/中熵合金因有其獨特之雙晶組織,在低溫及高應變速率發揮其獨特之性質。本實驗利用CrMnFeCoNi 高熵合金,經過滾軋後持溫700℃退火1至30分鐘,觀察再結晶與晶粒成長之現象。經由OIM軟體雙晶定量與密度分析,在再結晶初期,會因為快速之再結晶導致雙晶比例下降,此現象原因為再結晶初期,大量細小再結晶晶粒快速增生所致。此外,雙晶密度在退火過程持續增加至再結晶完成。透過比較CrMnFeCoNi 高熵合金滾軋退火800℃持溫1小時,雖然雙晶密度無顯著增加,但平均每個晶粒所含有之退火雙晶數增加許多。代表退火雙晶仍會在晶粒成長階段繼續發展。CrCoNiSi0.3在高溫1000℃持溫1小時退火後,單一晶粒可發展出4組不同方位之退火雙晶。利用軟體分析說明此四組退火雙晶與母相之雙晶方位關係。文中也透過極圖詳細說明退火雙晶在光學顯微鏡與電子顯微鏡形貌之成因。另外,也比較相同熱機處理之CrMnFeCoNi 高熵合金、CrFeCoNi 中熵合金、CrCoNi 中熵合金之雙晶密度與晶粒組織。在此次實驗中由於CrCoNi 中熵合金擁有最低之疊差能(18±4 mJ·m^2),CrCoNi中熵合金在雙晶密度以及雙晶比例皆比其他高中熵合金高上許多。最後透過機械測試探討機械雙晶與退火雙晶在拉伸過程之發展。在CrFeCoNi中熵合金之間斷拉伸實驗中,退火雙晶會在拉伸過程因為與母相晶粒失去雙晶關係,而提升高角度晶界之比例。除此之外,機械雙晶之真實臨界應力約為733MPa。最後,CrFeCoNi中熵合金在室溫下即便在真實應變量為 30%,僅能在單一變形晶粒觀察到一組變形雙晶的形成,推測是因為應力不足所致。 | zh_TW |
dc.description.abstract | The FCC series of High/Medium-entropy alloys have a unique twin structure and exhibit unique properties at low temperatures and high strain rates. CrMnFeCoNi high-entropy alloy (HAE) is heating at 700 ° C for 1 to 30 minutes after rolling. The phenomenon of recrystallization and grain growth can be observed. According to the quantitative and density analysis of the annealing twin by OIM software, the rapid recrystallization in the early stage of recrystallization leads to the decrease in the annealing twin fraction, which is caused by the rapid growth of a large number of small recrystallized grains in the early stage of recrystallization. In addition, the twin density continues to increase during the annealing process until the recrystallization completed. In addition, by comparing the CrMnFeCoNi HEA rolled and heating at 800°C for 1 hour. Although the density of annealing twins did not increase significantly, the average number of annealing twins per grain increased a lot. This means that the annealing twins would continue to develop in the grain growth stage. CrCoNiSi0.3 can develop 4 variants of annealing twins in a single grain after annealing at high temperature of 1000°C. OIM software analysis is used to illustrate the orientation of the annealing twin in relation to the parent phase. Detailed explanation of the causes of annealing morphology in optical microscopy and electron microscopy. The density and grain structure of the annealing twin of CrMnFeCoNi HEA, CrFeCoNi MEA, and CrCoNi MEA are compared with the same thermal-mechanical treatment. In this experiment, the CrCoNi alloy had the lowest stacking energy (18±4 mJ·m^2), and the twin density and twin fraction of CrCoNi alloy was much higher than other. Finally, the development of mechanical twin and annealing twin is discussed through mechanical test in tensile. In the interrupted tensile test, CrFeCoNi MEA annealing twins were found to transformed to high angle grain boundaries progressively. Due to CrFeCoNi MEA annealing twins loss of twin relationship with the parent phase during the tensile process. Furthermore, the stress of mechanical twin is about 733 MPa, and the formation of a single variant of deformation twin at room temperature due to insufficient stress. | en |
dc.description.provenance | Submitted by admin ntu (admin@lib.ntu.edu.tw) on 2024-02-27T16:11:57Z No. of bitstreams: 0 | en |
dc.description.provenance | Made available in DSpace on 2024-02-27T16:11:57Z (GMT). No. of bitstreams: 0 | en |
dc.description.tableofcontents | 中文摘要 I
ABSTRACT II CHAPTER 1 GENERAL INTRODUCTION 1 CHAPTER 2 LITERATURE REVIEW 3 2.1 HIGH-ENTROPY ALLOYS (HEAS) REVIEW 3 2.1.1 Introduction 3 2.1.2 Definition of HEAs/MEAs 4 2.1.3 Thermodynamics of HEAs 9 2.1.4 Tensile properties of High entropy alloys 11 2.2 ANNEALING TWIN IN HIGH ENTROPY ALLOYS 14 2.2.1 Introduction 14 2.2.2 Annealing twin orientation relationship 18 2.2.3 Annealing twin quantification 21 2.2.4 Annealing twin development during recrystallization & grain growth 24 2.3 DEFORMATION TWIN IN HEAS 28 2.3.1 Introduction 28 2.3.2 Influence factors of deformation twin 30 2.4 THE EFFECT OF TEMPERATURE AND STRAIN RATE IN HEAS WHILE DEFORMATION 38 2.4.1 The effect of temperature in HEAs while deformation 38 2.4.2 The effect of strain rate in HEAs while deformation 43 CHAPTER 3 INSTRUMENTS & ANALYSIS SOFTWARE 46 3.1 INTRODUCTION 46 3.2 INSTRUMENTS 47 3.2.1 Scanning Electron Microscope, SEM 47 3.2.2 Transmission Electron Microscope, TEM 51 3.3 ANALYSIS SOFTWARE 54 3.3.1 OIM Analysis 54 3.3.2 CaRIne 62 CHAPTER 4 ANNEALING TWIN DEVELOPMENT DURING RECRYSTALLIZATION AND GRAIN GROWTH IN CRMNFECONI HEAS 63 4.1 INTRODUCTION 63 4.2 EXPERIMENTAL DESIGN 66 4.3 RESULTS AND DISCUSSION 69 4.3.1 Stress release during annealing and recrystallization 69 4.3.2 Grains and annealing twins morphology during annealing and recrystallization 81 4.4 CONCLUSIONS 94 CHAPTER 5 ANNEALING TWIN ORIENTATION RELATIONSHIP IN HEA/MEAS 96 5.1 INTRODUCTION 96 5.2 EXPERIMENTAL DESIGN 97 5.3 RESULTS AND DISCUSSION 99 5.3.1 Four variants annealing twins in single crystal 99 5.3.2 Annealing twin density in different HEA/MEAs 104 5.4 CONCLUSIONS 110 CHAPTER 6 DEFORMATION EVOLUTION DURING INTERRUPTED TENSILE TESTS IN CRFECONI USING EBSD 112 6.1 INTRODUCTION 112 6.2 EXPERIMENTAL DESIGN 113 6.3 RESULTS AND DISCUSSION 115 6.4 CONCLUSIONS 123 CHAPTER 7 GENERAL CONCLUSIONS 124 CHAPTER 8 FUTURE WORK 127 REFERENCES 128 | - |
dc.language.iso | zh_TW | - |
dc.title | 高熵/中熵合金退火與變形之缺陷顯微結構演變 | zh_TW |
dc.title | Microstructural Evolution of High/Medium-entropy Alloys during Annealing and Deformation | en |
dc.type | Thesis | - |
dc.date.schoolyear | 111-2 | - |
dc.description.degree | 博士 | - |
dc.contributor.oralexamcommittee | 王星豪;陳志遠;蘇德徵;林東毅 | zh_TW |
dc.contributor.oralexamcommittee | Shing-Hoa Wang;Chih-Yuan Chen;Te-Cheng Su;Dong-Yih Lin | en |
dc.subject.keyword | 高熵合金,中熵合金,退火雙晶,機械雙晶,方位關係,背向電子繞射分析,掃描式電子顯微鏡,穿透式電子顯微鏡, | zh_TW |
dc.subject.keyword | High Entropy Alloys,Medium Entropy Alloys,Annealing Twin,Mechanical Twin,Orientation relationship,Electron Backscatter Diffraction (EBSD),Scanning Electron Microscope (SEM),Transmission Electron Microscope (TEM), | en |
dc.relation.page | 131 | - |
dc.identifier.doi | 10.6342/NTU202203226 | - |
dc.rights.note | 同意授權(全球公開) | - |
dc.date.accepted | 2022-09-08 | - |
dc.contributor.author-college | 工學院 | - |
dc.contributor.author-dept | 材料科學與工程學系 | - |
顯示於系所單位: | 材料科學與工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-111-2.pdf | 19.13 MB | Adobe PDF | 檢視/開啟 |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。