Please use this identifier to cite or link to this item:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/9009
Title: | 運用單具二維LIDAR在立體環境中定位與建地圖 3D Localization and Mapping Using One 2D LIDAR |
Authors: | Andreas Dopfer 竇菲 |
Advisor: | 王傑智(Chieh-Chih Wang) |
Keyword: | 建立三維空間, 3D mapping,LIDAR, |
Publication Year : | 2009 |
Degree: | 碩士 |
Abstract: | 在這篇論文中,我們提出一種只利用一台二維LIDAR讓機器人在三維空間中做定位和建立三維空間資訊的方法。我們同時利用事前的環境知識和機器人本人的運動來完成這件事。我們主要是達成一種在取得三維空間資訊的同時,也提供了比得上使用水平二維LIDAR定位效能的方法 Much work on localization and mapping using LIDAR has been done in mobile robotics. While earlier work was done only in the two dimensional domain, a recent shift towards three dimensional localization and mapping using laser rangefinder can be seen. Three dimensional representations allow a more accurate modeling of the real world, allowing more sophisticated path planning and leading to better obstacle avoidance. Also the performance of localization can be improved,and three dimensional data allows better object recognition than 2D data. Techniques capturing 3D data involve either multiple 2D LIDARS, one 2D LIDAR that is nodded or rotated using an external actuator together with highly accurate orientation sensing and synchronization, or an integrated, expensive 3D scanning system. In this thesis we propose a technique to capture 3D data only using one 2D LIDAR. To do so the robots motion is utilized together with reasonable assumptions. It is assumed that the ground the robot is moving on is flat and visible in the scan, that the sensors height is known and that the environment has vertical structures. First an initial calibration procedure using a camera together with the LIDAR is performed to reveal the extrinsic parameters between robot and the sensor. The localization problem is divided into two steps. The LIDARs sensing plane is tilted away from the robots direction of motion towards the floor (or another known flat structure in the environment). The detection of the floor allows to estimate the angular orientation of the sensor in two dimensions. Using these estimates the range data can be transformed, so that known methods to estimate the missing parameters of the full LIDAR pose can be adopted. Being able to accurately estimate the three dimensional displacement between two consecutive scans allows to build an accurate three dimensional map of the environment. |
URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/9009 |
Fulltext Rights: | 同意授權(全球公開) |
Appears in Collections: | 資訊工程學系 |
Files in This Item:
File | Size | Format | |
---|---|---|---|
ntu-98-1.pdf | 18.28 MB | Adobe PDF | View/Open |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.