請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/89935
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 楊哲人 | zh_TW |
dc.contributor.advisor | Jer-Ren Yang | en |
dc.contributor.author | 朱芊瑜 | zh_TW |
dc.contributor.author | Chien-Yu Chu | en |
dc.date.accessioned | 2023-09-22T16:44:37Z | - |
dc.date.available | 2023-11-09 | - |
dc.date.copyright | 2023-09-22 | - |
dc.date.issued | 2022 | - |
dc.date.submitted | 2023-08-11 | - |
dc.identifier.citation | Deschamps, A., et al., The influence of precipitation on plastic deformation of Al–Cu–Li alloys. Acta Materialia, 2013. 61(11): p. 4010-4021.
Ahmadi, S., H. Arabi, and A. Shokuhfar, Formation mechanisms of precipitates in an Al–Cu–Li–Zr alloy and their effects on strength and electrical resistance of the alloy. Journal of Alloys and Compounds, 2009. 484(1-2): p. 90-94. Davis, J.R., Asm Specialty Handbook: Aluminum & Aluminum Alloys. 1993: ASM international. Davis, J.R., Alloying: Understanding the Basics. 2001: ASM International. Runge, J., A Brief History of Aluminum and Its Alloys. 2018. p. 1-63. Cassada, W., G. Shiflet, and E. Starke, The effect of plastic deformation on Al 2 CuLi (T 1) precipitation. Metallurgical Transactions A, 1991. 22: p. 299-306. Gable, B., et al., The role of plastic deformation on the competitive microstructural evolution and mechanical properties of a novel Al–Li–Cu–X alloy. Journal of Light Metals, 2001. 1(1): p. 1-14. Dorin, T., et al., Quantification and modelling of the microstructure/strength relationship by tailoring the morphological parameters of the T1 phase in an Al–Cu–Li alloy. Acta Materialia, 2014. 75: p. 134-146. Ringer, S., B. Muddle, and I. Polmear, Effects of cold work on precipitation in Al-Cu-Mg-(Ag) and Al-Cu-Li-(Mg-Ag) alloys. Metallurgical and Materials Transactions A, 1995. 26: p. 1659-1671. Starke, E.A., Historical Development and Present Status of Aluminum–Lithium Alloys, in Aluminum-lithium Alloys. 2014. p. 3-26. Giummarra, C., B. Thomas, and R.J. Rioja. New aluminum lithium alloys for aerospace applications. in Proceedings of the light metals technology conference. 2007. Warner, T. Recently-developed aluminium solutions for aerospace applications. in Materials Science Forum. 2006. Prasad, N.E., A. Gokhale, and R.J.H. Wanhill, Aluminum-Lithium Alloys: Processing, Properties, and Applications. 2013: Elsevier Science. Rodgers, B.I. and P.B. Prangnell, Quantification of the influence of increased pre-stretching on microstructure-strength relationships in the Al–Cu–Li alloy AA2195. Acta Materialia, 2016. 108: p. 55-67. Wanhill, R., N.E. Prasad, and A. Gokhale, Aluminum-Lithium Alloys: Processing, Properties, and Applications. 2013. 1-571. Gladman, T., Precipitation hardening in metals. Materials Science and Technology, 1999. 15(1): p. 30-36. Smith, G.C., Age hardening of metals. Progress in Metal Physics, 1949. 1: p. 163-234. Bourgeois, L., et al., Structure and energetics of the coherent interface between the θ′ precipitate phase and aluminium in Al–Cu. Acta Materialia, 2011. 59(18): p. 7043-7050. Chang, Y., Crystal Structure and Nucleation Behavior of (111) Precipitates in an Al-3.9 Cu-0.5 Mg-0.5 Ag Alloy. 1993. Gayle, F.W., F.H. Heubaum, and J.R. Pickens, Structure and properties during aging of an ultra-high strength Al-Cu-Li-Ag-Mg alloy. Scripta Metallurgica et Materialia, 1990. 24(1): p. 79-84. Yoshimura, R., et al., Transmission electron microscopy study of the evolution of precipitates in aged Al–Li–Cu alloys: the θ′ and T1 phases. Acta Materialia, 2003. 51(14): p. 4251-4266. Duan, S.Y., et al., Interfacial structure evolution of the growing composite precipitates in Al-Cu-Li alloys. Acta Materialia, 2017. 129: p. 352-360. Courtney, T.H., Mechanical Behavior of Materials: Second Edition. 2005: Waveland Press. Stefanescu, D. and R. Ruxanda, Solidification Structure of Aluminum Alloys. 2004. p. 107-115. Mohamed, A.M.A. and F. Samuel, "A review on the heat treatment of Al-Si-Cu/Mg casting alloys", in Heat Treatment - Conventional and Novel Applications, F. Czerwinski, Ed. Intech, 2012: p. 54-72. Lavernia, E.J., T.S. Srivatsan, and F.A. Mohamed, Strength, deformation, fracture behaviour and ductility of aluminium-lithium alloys. Journal of Materials Science, 1990. 25(2): p. 1137-1158. Polmear, I.J.C., R.J., Abnormal age hardening in an Al-Cu-Mg alloy containing silver and lithium. Scr. Mater., 1989. 23: p. 1213-1217. Honma, T., et al., Coincidence Doppler broadening and 3DAP study of the pre-precipitation stage of an Al–Li–Cu–Mg–Ag alloy. Acta Materialia, 2004. 52(7): p. 1997-2003. Lequeu, P., K.P. Smith, and A. Daniélou, Aluminum-Copper-Lithium Alloy 2050 Developed for Medium to Thick Plate. Journal of Materials Engineering and Performance, 2010. 19(6): p. 841-847. Murayama, M. and K. Hono, Role of Ag and Mg on precipitation of T1 phase in an Al-Cu-Li-Mg-Ag alloy. Scripta Materialia, 2001. 44(4): p. 701-706. Kumar, K.S., S.A. Brown, and J.R. Pickens, Microstructural evolution during aging of an AlCuLiAgMgZr alloy. Acta Materialia, 1996. 44(5): p. 1899-1915. Huang, B.P. and Z.Q. Zheng, Independent and combined roles of trace Mg and Ag additions in properties precipitation process and precipitation kinetics of Al–Cu–Li–(Mg)–(Ag)–Zr–Ti alloys. Acta Materialia, 1998. 46(12): p. 4381-4393. Gault, B., et al., Atom probe tomography and transmission electron microscopy characterisation of precipitation in an Al–Cu–Li–Mg–Ag alloy. Ultramicroscopy, 2011. 111(6): p. 683-689. Gumbmann, E., et al., The effect of minor solute additions on the precipitation path of an AlCuLi alloy. Acta Materialia, 2016. 115: p. 104-114. Kang, S., et al., Atomic structure and growth mechanism of T1 precipitate in Al–Cu–Li–Mg–Ag alloy. Scripta Materialia, 2015. 109. Zhiguo, C., Z. Ziqiao, and Y. Hongkun, Effects of trace silver and magnesium on the microstructure and mechanical properties of Al−Cu−Li alloys. Journal of Wuhan University of Technology-Mater. Sci. Ed., 2005. 20(1): p. 9-12. Dwyer, C., et al., Combined electron beam imaging and ab initio modeling of T1 precipitates in Al-Li-Cu alloys. Applied Physics Letters, 2011. 98(20). Chung, T.-F., et al., Morphological evolution of GP zones and nanometer-sized precipitates in the AA2050 aluminium alloy. International Journal of Lightweight Materials and Manufacture, 2018. 1(3): p. 142-156. Xie, B., et al., Effect of the aging process and pre-deformation on the precipitated phase and mechanical properties of 2195 Al–Li alloy. Materials Science and Engineering: A, 2022. 832. Han, J., et al., Enhanced matrix precipitation of T1 (Al2CuLi) phase in AA2055 Al–Li alloy during stress aging process. Materials Science and Engineering: A, 2021. 827: p. 142057. Deng, Y., et al., Investigation on formation mechanism of T1 precipitate in an Al-Cu-Li alloy. Journal of Alloys and Compounds, 2017. 723. Gao, Z., et al., Formation mechanism of precipitate T1 in AlCuLi alloys. Journal of Alloys and Compounds, 2015. 624: p. 22-26. Dash, S.S., et al., On the origin of deformation mechanisms in a heterostructured aluminum alloy via slip trace and lattice rotation analyses. Materials Science and Engineering: A, 2023. 867. Samarendra, R. and R. Shibayan, New-Age Al-Cu-Mn-Zr (ACMZ) Alloy for High Temperature-High Strength Applications: A Review. 2022. Blankenship Jr, C., E. Hornbogen, and E. Starke Jr, Predicting slip behavior in alloys containing shearable and strong particles. Materials Science and Engineering: A, 1993. 169(1-2): p. 33-41. Nie, J.F. and B.C. Muddle, Microstructural design of high-strength aluminum alloys. Journal of Phase Equilibria, 1998. 19(6): p. 543-551. Groh, P., L. Kubin, and J. Martin, Dislocations et deformation plastique: Ecole d'été d'Yravals 3-14 Septembre 1979. (No Title), 1979. Nie, J.F., B.C. Muddle, and I.J. Polmear, The effect of precipitate shape and orientation on dispersion strengthening in high strength aluminium alloys. Materials Science Forum, 1996. 217-222(PART 2): p. 1257-1262. Howe, J.M., J. Lee, and A.K. Vasudévan, Structure and deformation behavior of T1 precipitate plates in an Al- 2Li- 1 Cu alloy. Metallurgical Transactions A, 1988. 19(12): p. 2911-2920. Dorin, T., et al., Strengthening mechanisms of T1 precipitates and their influence on the plasticity of an Al–Cu–Li alloy. Materials Science and Engineering: A, 2014. 605: p. 119-126. Li, B.Q. and F.E. Wawner, Dislocation interaction with semicoherent precipitates (Ω phase) in deformed Al–Cu–Mg–Ag alloy. Acta Materialia, 1998. 46(15): p. 5483-5490. Bai, S., H. Di, and Z. Liu, Dislocation interaction with Ω phase in crept Al–Cu–Mg–Ag alloys. Materials Science and Engineering: A, 2016. 651: p. 399-405. Zhang, P., S.X. Li, and Z.F. Zhang, General relationship between strength and hardness. Materials Science and Engineering: A, 2011. 529: p. 62-73. Vetrivel Sezhian, M., et al., Microstructural and Mechanical Behaviors of Friction Stir Welded Dissimilar AA6082-AA7075 Joints. Advances in Materials Science and Engineering, 2021. 2021: p. 4113895. | - |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/89935 | - |
dc.description.abstract | AA2050鋁銅鋰合金展現出高強度、輕量化和良好的耐蝕性等優異性能,因此非常適合應用於航空材料。在AA2050鋁合金中,強化效果的貢獻主要來自T1相的析出,該析出相在母相基地的{111}Al面上以盤狀結構形式存在於鋁合金材料內部。本研究聚焦於AA2050鋁銅鋰合金之析出物T1與差排間的交互作用,有關T1析出物的強化機制和析出物與差排之交互作用已在過去文獻中有過多次討論,最早T1析出物被視為一種強大的不可剪切相,然而當時受限於穿透式電子顯微鏡之影像解析度,無法進一步觀測厚度僅有數奈米的T1析出物。隨著高解析電子顯微鏡技術的進步,漸漸有許多研究發現T1在足夠薄的厚度下會出現被差排剪切的現象,推翻了過去T1無法被差排剪切的結論。本研究首先透過硬度試驗找出AA2050鋁合金之最佳人工時效條件為155℃持溫20小時,並將此頂時效狀態的試片進行常溫及高溫(150℃、200℃)拉伸試驗測定其機械性能,發現於高溫狀態下材料仍保有一定的強度。針對析出物與差排交互作用之顯微結構,本研究透過穿透式電子顯微鏡的拍攝TEM明場影像及HRTEM影像取得差排剪切的T1之形貌,進一步發現在不同應變量下,析出物T1與差排的交互作用隨著應變量提升而有漸增的趨勢,且差排對T1同一處僅會進行單一次剪切。值得注意的是,對於同一T1析出物而言,每一次剪切事件發生之間距在常溫下為2至5奈米,而高溫拉伸試片中觀測到的交互作用情形相較於常溫拉伸試片更加劇烈,被剪切的T1之形貌更加不規則,剪切現象的發生更加頻繁密集。此外,本研究也透過EDS mapping發現T1析出物周遭出現鎂銀元素偏析,T1析出物內部也有少量鋅原子取代銅原子的現象發生。 | zh_TW |
dc.description.abstract | AA2050 Al-Cu-Li alloys are widely used in aerospace industries due to their high strength, low density and good damage tolerance. Among AA2050 aluminum alloys, the precipitation of T1 phase provides the main contribution of strengthening. T1 phase is identified as platelet-shaped precipitate, lying on habit planes of {111}Al in the aluminum matrix. In this work, the dislocation interactions with T1 phase in AA2050 Al-Cu-Li alloy have been investigated. In early studies, considerable effort has been devoted to the relationships between dislocations and T1 precipitates. T1 precipitates were initially considered as non-shearable particles, while subsequent researches gave solid evidence that sufficiently thin nanoscale T1 precipitates could be cut through by moving dislocations.
In this study, hardness test was first conducted, determining 155℃ artificial aging treatment for 20 hours as part of the experimental design to acquire the peak aging condition of AA2050 aluminum alloy. Room temperature and high temperature (150℃ and 200℃) tensile tests were employed on the peak-aged samples, and the experimental results elucidated that AA2050 aluminum alloy retained its desirable mechanical properties to such a degree at elevated temperatures. As the interactions with dislocations increased with the increment of strain, conventional TEM bright-field images and HRTEM images demonstrated the morphology of T1 precipitates cut by dislocations under different plastic deformation stages. Observations of the microstructures of the specimens indicated that single shearing events were energetically preferred regardless of the thicknesses of T1 precipitates. It is worth noting that the distance between every single shearing step falls in a range of 2-5 nm for room temperature tensile test specimens. However, it is of interest to evaluate more precisely on those high temperature tensile test samples since the phenomena of the dislocation-precipitate interactions observed were relatively more complex and individualized. Moreover, this research also revealed the segregation of Mg and Ag atoms surrounding T1 precipitates, and a minor occurrence of Zn atoms substituting Cu atoms within the T1 precipitates through EDS mapping. | en |
dc.description.provenance | Submitted by admin ntu (admin@lib.ntu.edu.tw) on 2023-09-22T16:44:37Z No. of bitstreams: 0 | en |
dc.description.provenance | Made available in DSpace on 2023-09-22T16:44:37Z (GMT). No. of bitstreams: 0 | en |
dc.description.tableofcontents | 論文口試委員審定書 i
致謝 ii 摘要 iv ABSTRACT v 目錄 vii 圖目錄 ix 表目錄 xii 第一章 緒論 1 1.1 研究背景與動機 1 第二章 文獻探討 3 2.1 鋁合金種類介紹 3 2.1.1 鋁鋰合金的發展與應用 5 2.2 2xxx系鋁合金的析出硬化 8 2.3 添加鎂銀元素對AA2050鋁合金之影響 10 2.4 AA2050鋁合金析出物介紹 14 2.5 T1析出物的成核與成長機制 20 2.6 鋁合金析出物T1與差排之交互作用 21 2.6.1 鋁的差排與滑移系統 21 2.6.2 T1析出物與差排的剪切機制 22 2.6.3 T1析出物與差排的交互作用實例 27 第三章 材料與研究方法 34 3.1 材料成分與化學組成 34 3.2 熱處理製程 34 3.3 硬度試驗 35 3.4 拉伸試驗 35 3.5 穿透式電子顯微鏡分析 36 第四章 結果與討論 38 4.1 硬度試驗 38 4.2 拉伸試驗 39 4.2.1 常溫拉伸試驗 39 4.2.2 高溫拉伸試驗 40 4.3 不同應變量下析出物T1的顯微結構分析 40 4.3.1 常溫拉伸試驗之TEM明場影像 40 4.3.2 高溫拉伸試驗之TEM明場影像 43 4.4 T1析出物的鎂銀偏析現象 45 4.5 利用HRTEM影像觀察T1析出物的剪切事件 48 第五章 結論 52 第六章 未來工作 53 參考文獻 54 | - |
dc.language.iso | zh_TW | - |
dc.title | AA2050 鋁合金差排與析出物之交互作用關係探討 | zh_TW |
dc.title | Dislocation-precipitate Interaction of AA2050 Aluminum Alloy | en |
dc.type | Thesis | - |
dc.date.schoolyear | 111-2 | - |
dc.description.degree | 碩士 | - |
dc.contributor.oralexamcommittee | 蘇德徵;王樂民;鍾采甫 | zh_TW |
dc.contributor.oralexamcommittee | De-Jheng Su;Le-Min Wang;Tsai-Fu Chung | en |
dc.subject.keyword | AA2050鋁銅鋰合金,析出硬化,T1相,奈米級析出物,顯微結構,穿透式電子顯微鏡, | zh_TW |
dc.subject.keyword | AA2050 Al-Cu-Li alloys,precipitation hardening,T1 phase,nanoscale precipitates,microstructure,transmission electron microscope, | en |
dc.relation.page | 59 | - |
dc.identifier.doi | 10.6342/NTU202303875 | - |
dc.rights.note | 同意授權(全球公開) | - |
dc.date.accepted | 2023-08-12 | - |
dc.contributor.author-college | 工學院 | - |
dc.contributor.author-dept | 材料科學與工程學系 | - |
顯示於系所單位: | 材料科學與工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-111-2.pdf 此日期後於網路公開 2028-08-09 | 5.71 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。