請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/89034
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 楊哲人 | zh_TW |
dc.contributor.advisor | Jer-Ren Yang | en |
dc.contributor.author | 林宜嫺 | zh_TW |
dc.contributor.author | Yi-Xian Lin | en |
dc.date.accessioned | 2023-08-16T16:51:22Z | - |
dc.date.available | 2023-11-09 | - |
dc.date.copyright | 2023-08-16 | - |
dc.date.issued | 2023 | - |
dc.date.submitted | 2023-08-08 | - |
dc.identifier.citation | J.W. Yeh, S.K. Chen, S.J. Lin, J.Y. Gan, T.S. Chin, T.T. Shun, C.H. Tsau, S.Y. Chang, Nanostructured high-entropy alloys with multiple principal elements: Novel alloy design concepts and outcomes, Advanced Engineering Materials 6(5) (2004) 299-303.
B. Cantor, I.T.H. Chang, P. Knight, A.J.B. Vincent, Microstructural development in equiatomic multicomponent alloys, Materials Science and Engineering: A 375-377 (2004) 213-218. H. Derazkola, E. Garcia, A. Murillo-Marrodán, D. Meresse, Review on dynamic recrystallization of martensitic stainless steels during hot deformation: Part I-experimental study, Metals - Open Access Metallurgy Journal 11 (2021) 572. Q. Xue, G.T. Gray, Development of adiabatic shear bands in annealed 316L stainless steel: Part II. TEM studies of the evolution of microstructure during deformation localization, Metallurgical and Materials Transactions A 37(8) (2006) 2447-2458. H.W. Deng, Z.M. Xie, B.L. Zhao, Y.K. Wang, M.M. Wang, J.F. Yang, T. Zhang, Y. Xiong, X.P. Wang, Q.F. Fang, C.S. Liu, Tailoring mechanical properties of a CoCrNi medium-entropy alloy by controlling nanotwin-HCP lamellae and annealing twins, Materials Science and Engineering: A 744 (2019) 241-246. P. Sathiyamoorthi, P. Asghari-Rad, J.W. Bae, H.S. Kim, Fine tuning of tensile properties in CrCoNi medium entropy alloy through cold rolling and annealing, Intermetallics 113 (2019) 106578. W. Lu, X. Luo, Y. Yang, B. Huang, Hall-petch relationship and heterogeneous strength of CrCoNi medium-entropy alloy, Materials Chemistry and Physics 251 (2020) 123073. Z. Li, L. Chen, P. Fu, H. Su, P. Dai, Q. Tang, The effect of Si addition on the heterogeneous grain structure and mechanical properties of CrCoNi medium entropy alloy, Materials Science and Engineering: A 852 (2022) 143655. B.S. Murty, J.W. Yeh, S. Ranganathan, P.P. Bhattacherjee, High entropy alloys, 2nd ed., Elsevier, Amsterdam, 2019. J.W. Yeh, Alloy Design Strategies and Future Trends in High-Entropy Alloys, JOM 65(12) (2013) 1759-1771. J.W. Yeh, Recent progress in high-entropy alloys, European Journal of Control - EUR J CONTROL 31 (2006) 633-648. J.W. Yeh, Overview of High-Entropy Alloys, in: M.C. Gao, J.W. Yeh, P.K. Liaw, Y. Zhang (Eds.), High-Entropy Alloys: Fundamentals and Applications, Springer International Publishing, Cham, 2016, pp. 1-19. Z. Wu, H. Bei, F. Otto, G.M. Pharr, E.P. George, Recovery, recrystallization, grain growth and phase stability of a family of FCC-structured multi-component equiatomic solid solution alloys, Intermetallics 46 (2014) 131-140. Z. Wu, H. Bei, G.M. Pharr, E.P. George, Temperature dependence of the mechanical properties of equiatomic solid solution alloys with face-centered cubic crystal structures, Acta Materialia 81 (2014) 428-441. G. Laplanche, A. Kostka, C. Reinhart, J. Hunfeld, G. Eggeler, E.P. George, Reasons for the superior mechanical properties of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi, Acta Materialia 128 (2017) 292-303. S.F. Liu, Y. Wu, H.T. Wang, J.Y. He, J.B. Liu, C.X. Chen, X.J. Liu, H. Wang, Z.P. Lu, Stacking fault energy of face-centered-cubic high entropy alloys, Intermetallics 93 (2018) 269-273. D. Xu, M. Wang, T. Li, X. Wei, Y. Lu, A critical review of the mechanical properties of CoCrNi-based medium-entropy alloys, Microstructures 2(1) (2022) 2022001. K. Jeong, J.E. Jin, Y.S. Jung, S. Kang, Y.K. Lee, The effects of Si on the mechanical twinning and strain hardening of Fe–18Mn–0.6C twinning-induced plasticity steel, Acta Materialia 61(9) (2013) 3399-3410. S.M. Lee, S.J. Lee, S. Lee, J.H. Nam, Y.K. Lee, Tensile properties and deformation mode of Si-added Fe-18Mn-0.6C steels, Acta Materialia 144 (2018) 738-747. D. Li, Y. Feng, S. Song, Q. Liu, Q. Bai, F. Ren, F. Shangguan, Influences of silicon on the work hardening behavior and hot deformation behavior of Fe–25wt%Mn–(Si, Al) TWIP steel, Journal of Alloys and Compounds 618 (2015) 768-775. S. Liu, W. Lin, Y. Zhao, D. Chen, G. Yeli, F. He, S. Zhao, J.-j. Kai, Effect of silicon addition on the microstructures, mechanical properties and helium irradiation resistance of NiCoCr-based medium-entropy alloys, Journal of Alloys and Compounds 844 (2020) 156162. H. Chang, T.W. Zhang, S.G. Ma, D. Zhao, R.L. Xiong, T. Wang, Z.Q. Li, Z.H. Wang, Novel Si-added CrCoNi medium entropy alloys achieving the breakthrough of strength-ductility trade-off, Materials & Design 197 (2021) 109202. C. Kittel, Introduction to solid state physics / Charles Kittel, 8th ed. ed., Wiley, Hoboken, N.J, 2005. H. Yi, M. Bi, K. Yang, B. Zhang, Significant Improvement the Mechanical Properties of CoCrNi Alloy by Tailoring a Dual FCC-Phase Structure, Materials (Basel) 13(21) (2020). F.J. Humphreys, M. Hatherly, Chapter 2 - The Deformed State, in: F.J. Humphreys, M. Hatherly (Eds.), Recrystallization and Related Annealing Phenomena, 2nd ed., Elsevier, Oxford, 2004, pp. 11-65. N. Hansen, R.F. Mehl, A. Medalist, New discoveries in deformed metals, Metallurgical and Materials Transactions A 32(12) (2001) 2917-2935. D.A. Hughes, N. Hansen, D.J. Bammann, Geometrically necessary boundaries, incidental dislocation boundaries and geometrically necessary dislocations, Scripta Materialia 48(2) (2003) 147-153. G.I. Taylor, Plastic strain in metals, J. Inst. Metals 62 (1938) 307-324. D. Swisher, Deformation Banding and Grain Refinement in FCC Materials, 2003, p. 181. D. Raabe, 23 - Recovery and Recrystallization: Phenomena, Physics, Models, Simulation, in: D.E. Laughlin, K. Hono (Eds.), Physical Metallurgy, 5th ed., Elsevier, Oxford, 2014, pp. 2291-2397. R. Sabban, K. Dash, S. Suwas, B. Murty, Strength–ductility synergy in high entropy alloys by tuning the thermo-mechanical process parameters: A comprehensive review, Journal of the Indian Institute of Science 102 (2022) 1-26. S. Allain, J.P. Chateau, O. Bouaziz, S. Migot, N. Guelton, Correlations between the calculated stacking fault energy and the plasticity mechanisms in Fe–Mn–C alloys, Materials Science and Engineering: A 387-389 (2004) 158-162. Y. Fang, Y. Chen, B. Chen, S. Li, B. Gludovatz, E.S. Park, G. Sheng, R.O. Ritchie, Q. Yu, An in situ ambient and cryogenic transmission electron microscopy study of the effects of temperature on dislocation behavior in CrCoNi-based high-entropy alloys with low stacking-fault energy, Applied Physics Letters 119(26) (2021) 261903. A.K. Chandan, S. Tripathy, B. Sen, M. Ghosh, S. Ghosh Chowdhury, Temperature dependent deformation behavior and stacking fault energy of Fe40Mn40Co10Cr10 alloy, Scripta Materialia 199 (2021) 113891. A.S. Tirunilai, R. Osmundsen, I. Baker, H. Chen, K.P. Weiss, M. Heilmaier, A. Kauffmann, Simultaneous twinning and microband-induced plasticity of a compositionally complex alloy with interstitial carbon at cryogenic temperatures, High Entropy Alloys & Materials (2022). J. Gubicza, Annealing-induced hardening in ultrafine-grained and nanocrystalline materials, Advanced Engineering Materials 22(1) (2020) 1900507. R.R. Hasiguti, A proposed theory of anneal-hardening of cold-worked alpha brass, J. Jap. Inst. Metals 19(2) (1955) 103-106. J.M. Vitek, H. Warlimont, The mechanism of anneal hardening in dilute copper alloys, Metallurgical Transactions A 10(12) (1979) 1889-1892. R.W. Cahn, R.G. Davies, X-ray evidence for segregation of solute to stacking faults in a copper-aluminium alloy, The Philosophical Magazine: A Journal of Theoretical Experimental and Applied Physics 5(59) (1960) 1119-1126. S. Miura, T. Tajima, Effect of grain boundaries on anneal hardening in Cu-Al alloy, Metal Science 12(4) (1978) 183-191. J. Languillaume, F. Chmelik, G. Kapelski, F. Bordeaux, A.A. Nazarov, G. Canova, C. Esling, R.Z. Valiev, B. Baudelet, Microstructures and hardness of ultrafine-grained Ni3Al, Acta Metallurgica et Materialia 41(10) (1993) 2953-2962. S. Praveen, J.W. Bae, P. Asghari-Rad, J.M. Park, H.S. Kim, Annealing-induced hardening in high-pressure torsion processed CoCrNi medium entropy alloy, Materials Science and Engineering: A 734 (2018) 338-340. J. Gu, M. Song, Annealing-induced abnormal hardening in a cold rolled CrMnFeCoNi high entropy alloy, Scripta Materialia 162 (2019) 345-349. X. Huang, N. Hansen, N. Tsuji, Hardening by Annealing and softening by deformation in nanostructured metals, Science 312(5771) (2006) 249-251. L.H. Su, C. Lu, A.K. Tieu, L.Z. He, Y. Zhang, D. Wexler, Vacancy-assisted hardening in nanostructured metals, Materials Letters 65(3) (2011) 514-516. J. Tao, G. Chen, W. Jian, J. Wang, Y. Zhu, X. Zhu, T.G. Langdon, Anneal hardening of a nanostructured Cu–Al alloy processed by high-pressure torsion and rolling, Materials Science and Engineering: A 628 (2015) 207-215. J. Gubicza, P.H.R. Pereira, G. Kapoor, Y. Huang, S.S. Vadlamani, T.G. Langdon, Annealing-induced hardening in ultrafine-grained Ni–Mo alloys, Advanced Engineering Materials 20(9) (2018) 1800184. A.Y. Volkov, I.V. Kliukin, Improving the mechanical properties of pure magnesium through cold hydrostatic extrusion and low-temperature annealing, Materials Science and Engineering: A 627 (2015) 56-60. T.D. Shen, R.B. Schwarz, S. Feng, J.G. Swadener, J.Y. Huang, M. Tang, J. Zhang, S.C. Vogel, Y. Zhao, Effect of solute segregation on the strength of nanocrystalline alloys: Inverse Hall–Petch relation, Acta Materialia 55(15) (2007) 5007-5013. W. Zeng, Y. Shen, N. Zhang, X. Huang, J. Wang, G. Tang, A. Shan, Rapid hardening induced by electric pulse annealing in nanostructured pure aluminum, Scripta Materialia 66(3) (2012) 147-150. Z. Li, L. Fu, B. Fu, A. Shan, Effects of annealing on microstructure and mechanical properties of nano-grained titanium produced by combination of asymmetric and symmetric rolling, Materials Science and Engineering: A 558 (2012) 309-318. S. Zhou, W. Lv, P. Li, Y. Gong, J. Tao, L. Cheng, X. Zhu, Mechanical properties and deformation kinetics of bulk Cu–Al–Zn alloy subjected to rolling and annealing, Materials Science and Engineering: A 609 (2014) 217-221. N. Kamikawa, X. Huang, N. Tsuji, N. Hansen, Strengthening mechanisms in nanostructured high-purity aluminium deformed to high strain and annealed, Acta Materialia 57(14) (2009) 4198-4208. L. Jiang, M.T. Pérez-Prado, P.A. Gruber, E. Arzt, O.A. Ruano, M.E. Kassner, Texture, microstructure and mechanical properties of equiaxed ultrafine-grained Zr fabricated by accumulative roll bonding, Acta Materialia 56(6) (2008) 1228-1242. D.K. Yang, P. Cizek, P.D. Hodgson, C.E. Wen, Microstructure evolution and nanograin formation during shear localization in cold-rolled titanium, Acta Materialia 58(13) (2010) 4536-4548. Q. Xue, X.Z. Liao, Y.T. Zhu, G.T. Gray, Formation mechanisms of nanostructures in stainless steel during high-strain-rate severe plastic deformation, Materials Science and Engineering: A 410-411 (2005) 252-256. C. Haase, L.A. Barrales-Mora, Influence of deformation and annealing twinning on the microstructure and texture evolution of face-centered cubic high-entropy alloys, Acta Materialia 150 (2018) 88-103. S. Dash, N. Brown, An investigation of the origin and growth of annealing twins, Acta Metallurgica 11(9) (1963) 1067-1075. S. Mahajan, C.S. Pande, M.A. Imam, B.B. Rath, Formation of annealing twins in f.c.c. crystals, Acta Materialia 45(6) (1997) 2633-2638. Q. Zhu, Q. Huang, Y. Tian, S. Zhao, Y. Chen, G. Cao, K. Song, Y. Zhou, W. Yang, Z. Zhang, X.H. An, H. Zhou, J. Wang, Hierarchical twinning governed by defective twin boundary in metallic materials, Science Advances 8 (2022). C. Hu, D.L. Medlin, R. Dingreville, Disconnection-mediated transition in segregation structures at twin boundaries, The Journal of Physical Chemistry Letters 12(29) (2021) 6875-6882. E.O. Hall, The Deformation and ageing of mild steel: III discussion of results, Proceedings of the Physical Society. Section B 64(9) (1951) 747. N. Petch, The cleavage strength of polycrystals, J. Iron Steel Inst. 174 (1953) 25-28. Y.-C. Huang, C.-H. Su, S.-K. Wu, C. Lin, A study on the Hall–Petch relationship and grain growth kinetics in FCC-structured high/medium entropy alloys, Entropy, 2019. F. Ernst, M.W. Finnis, D. Hofmann, T. Muschik, U. Schönberger, U. Wolf, M. Methfessel, Theoretical prediction and direct observation of the 9R structure in Ag, Physical Review Letters 69(4) (1992) 620-623. L. Liu, J. Wang, S.K. Gong, S.X. Mao, High resolution transmission electron microscope observation of zero-strain deformation twinning mechanisms in Ag, Physical Review Letters 106(17) (2011) 175504. J. Wang, A. Misra, J.P. Hirth, Shear response of Σ3{112} twin boundaries in face-centered-cubic metals, Physical Review B 83(6) (2011) 064106. Z. Zhang, H. Sheng, Z. Wang, B. Gludovatz, Z. Zhang, E. George, Q. Yu, S. Mao, R. Ritchie, Dislocation mechanisms and 3D twin architectures generate exceptional strength-ductility-toughness combination in CrCoNi medium-entropy alloy, Nature Communications 8 (2017) 14390. L.X. Wang, S. Xiang, Y.B. Tan, W. Shi, Y.Q. Cai, X.M. Ji, The role of 9R structures on deformation-induced martensitic phase transformations in dual-phase high-entropy alloys, Materials Science and Engineering: A 853 (2022) 143705. | - |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/89034 | - |
dc.description.abstract | 一般而言,對變形後的金屬材料施以退火時,再結晶抑或是回復過程中缺陷的消弭都會導致材料的軟化。然而,對一些經歷了嚴重塑性變形的合金(包括高熵合金)進行退火後,可以觀察到稱為「退火誘導硬化」的異常硬化現象。縱使已有數種針對「退火誘導硬化」現象的解釋被提出,確切的機制仍未有定論。
本研究對CrCoNiSi0.15中熵合金進行80%的冷軋延,接著分別在300 ~ 1000 °C退火1小時,量測其硬度變化。在退火溫度介於300 ~ 550 °C的回復階段下,可以觀察到試片在退火後硬度不降反升,即發生所謂的退火誘導硬化現象。其中,試片在500 °C 退火1小時後硬度達到最大值:563.6±28.4 HV,與冷軋延試片的硬度相比高出了將近20%。為了探討退火誘導硬化現象背後的原因,本研究使用電子背向散射繞射(EBSD)和穿透式電子顯微鏡(TEM)來分析冷軋延和後續退火過程中顯微結構的演變。 分析冷軋延試片的顯微組織後發現,CrCoNiSi0.15中熵合金在冷軋延過程中會啟動兩種變形機制:變形雙晶和微帶形成。在500 °C 退火1小時後,主要由變形雙晶組成的區域不受影響,但在剪切帶處可觀察到,由變形雙晶和板條狀微帶所構成的組織,在退火過程中藉由差排的重新排列與消弭,被分節、分割成長條狀的次晶粒。這些次晶粒中可以觀察到疊差和變形雙晶等缺陷。退火後所形成的奈米級次晶粒結構,以及回復階段可動差排源的減少、晶界能量的鬆弛,皆被推測為引起CrCoNiSi0.15中熵合金發生退火誘導硬化的原因。冷軋延試片在600 °C或是更高的溫度退火1小時後,試片進入再結晶階段,使得退火誘導硬化的現象消退。被保留在次晶粒中的疊差及變形雙晶,有可能做為成核點,促進再結晶階段奈米級退火雙晶的形成,使得CrCoNiSi0.15中熵合金的再結晶組織中,有相當高的退火雙晶密度。 | zh_TW |
dc.description.abstract | In most deformed metals, annealing leads to softening due to either recrystallization or the annihilation of defects during recovery. However, an abnormal hardening effect, referred to as “annealing-induced hardening”, has been observed in several alloys, including high entropy alloys, following severe plastic deformation and post-deformation annealing. Though several possible explanations have been suggested to elucidate the annealing-induced hardening phenomenon, the exact mechanism remains uncertain.
In this study, CrCoNiSi0.15 medium entropy alloy was cold rolled to 80% thickness reduction and subsequently annealed at temperatures ranging from 300 ~ 1000 °C for 1 h. An annealing-induced hardening phenomenon was observed as the hardness of the cold-rolled samples increased after annealing at medium temperatures 300 ~ 550 °C during the recovery stage. A maximum value of 563.6±28.4 HV is reached after annealing at 500 °C for 1 h, exceeding the hardness of the cold-rolled sample by nearly 20%. The microstructural evolution during the cold rolling and post-deformation annealing process was investigated by electron backscattered diffraction (EBSD) and transmission electron microscope (TEM). It was observed that during cold rolling, two deformation mechanisms: deformation twinning and microbands formation were both activated. After annealed at 500 °C for 1 h, the regions of deformation twins remained, while shear bands comprising both deformation twins and thin lath-like microbands underwent segmentation and splitting, resulting in the formation of elongated subgrains containing defects like stacking faults and deformation twins. The presence of these remained defects in nanoscale subgrains, along with the reduction in mobile dislocation sources and the relaxation of the subgrain boundaries' energy during the recovery stage, are presumed to be the main factors contributing to the annealing-induced hardening phenomenon in the CrCoNiSi0.15 medium entropy alloy. This phenomenon subsided as recrystallization was initiated upon annealing the samples at temperatures of 600 °C and above. The stacking faults and deformation twins present in the subgrains may serve as nuclei for nano-annealing twin formation in the newly recrystallized grains, resulting in a high density of annealing twins in the recrystallized microstructure of the CrCoNiSi0.15 medium entropy alloy. | en |
dc.description.provenance | Submitted by admin ntu (admin@lib.ntu.edu.tw) on 2023-08-16T16:51:22Z No. of bitstreams: 0 | en |
dc.description.provenance | Made available in DSpace on 2023-08-16T16:51:22Z (GMT). No. of bitstreams: 0 | en |
dc.description.tableofcontents | 致謝 i
摘要 iii Abstract iv Table of Contents vi Lists of Figures ix Lists of Tables xv Chapter 1 General introduction 1 Chapter 2 Literature review 3 2.1 High entropy alloys and medium entropy alloys 3 2.1.1 Introduction and definitions 3 2.1.2 CrCoNi medium entropy alloy 6 2.1.3 CrCoNiSix medium entropy alloys 7 2.2 The deformed state 12 2.2.1 Deformation-induced microstructures in FCC metals 12 2.2.2 Deformation mechanism in HEAs/MEAs 15 2.3 Annealing-induced hardening 17 2.3.1 Introduction 17 2.3.2 Long-range ordered structure 18 2.3.3 Nanotwin-HCP lamellae formation 21 2.3.4 Reduction of mobile dislocation density and grain boundary relaxation 23 Chapter 3 Research methodology 27 3.1 Introduction 27 3.2 Experimental material 28 3.3 Cold rolling and annealing 28 3.4 Vickers hardness test 29 3.5 Microstructure characterization 30 3.5.1 Scanning electron microscopy – electron backscattered diffraction 30 3.5.2 Transmission electron microscopy 31 Chapter 4 Microhardness and microstructure evolution during cold rolling and post-rolling annealing 32 4.1 Introduction 32 4.2 Vickers hardness test 32 4.3 Deformed microstructures after cold rolling 35 4.3.1 TEM results 35 4.3.2 EBSD results 46 4.3.3 Summary 49 4.4 Microstructures after post-rolling annealing 50 4.4.1 Microstructure evolution during recovery 50 4.4.2 Microstructure evolution during partial recrystallization 61 4.4.3 Microstructure evolution after fully recrystallization 80 Chapter 5 Conclusions 89 Chapter 6 Future work 91 Reference 92 | - |
dc.language.iso | en | - |
dc.title | CrCoNiSi0.15中熵合金在冷軋延後退火下之異常硬化現象及顯微結構演變之研究 | zh_TW |
dc.title | The Annealing-Induced Hardening Effect and Microstructure Evolution of CrCoNiSi0.15 Medium Entropy Alloy During Post-rolling Annealing | en |
dc.type | Thesis | - |
dc.date.schoolyear | 111-2 | - |
dc.description.degree | 碩士 | - |
dc.contributor.oralexamcommittee | 黃慶淵;李驊登;蔡劭璞 | zh_TW |
dc.contributor.oralexamcommittee | Ching-Yuan Huang;Hwa-Teng Lee;Shao-Pu Tsai | en |
dc.subject.keyword | 中熵合金,冷軋延,變形後退火,退火誘導硬化現象,微帶,變形雙晶,奈米退火雙晶, | zh_TW |
dc.subject.keyword | medium entropy alloy,cold rolling,post-deformation annealing,annealing-induced hardening,microband,deformation twin,nano-annealing twin, | en |
dc.relation.page | 96 | - |
dc.identifier.doi | 10.6342/NTU202303722 | - |
dc.rights.note | 同意授權(限校園內公開) | - |
dc.date.accepted | 2023-08-10 | - |
dc.contributor.author-college | 工學院 | - |
dc.contributor.author-dept | 材料科學與工程學系 | - |
顯示於系所單位: | 材料科學與工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-111-2.pdf 授權僅限NTU校內IP使用(校園外請利用VPN校外連線服務) | 10.59 MB | Adobe PDF | 檢視/開啟 |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。