請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/88815
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 楊哲人 | zh_TW |
dc.contributor.advisor | Jer-Ren Yang | en |
dc.contributor.author | 駱炯源 | zh_TW |
dc.contributor.author | Chiung-Yuan Lo | en |
dc.date.accessioned | 2023-08-15T17:54:02Z | - |
dc.date.available | 2023-11-09 | - |
dc.date.copyright | 2023-08-15 | - |
dc.date.issued | 2023 | - |
dc.date.submitted | 2023-08-07 | - |
dc.identifier.citation | 1. Yeh, J.W., et al., Nanostructured high‐entropy alloys with multiple principal elements: novel alloy design concepts and outcomes. Advanced engineering materials, 2004. 6(5): p. 299-303.
2. Cantor, B., et al., Microstructural development in equiatomic multicomponent alloys. Materials Science and Engineering: A, 2004. 375: p. 213-218. 3. Tsai, M.-H. and J.-W. Yeh, High-Entropy Alloys: A Critical Review. Materials Research Letters, 2014. 2(3): p. 107-123. 4. Youssef, K.M., et al., A novel low-density, high-hardness, high-entropy alloy with close-packed single-phase nanocrystalline structures. Materials Research Letters, 2015. 3(2): p. 95-99. 5. Senkov, O.N., et al., Mechanical properties of Nb25Mo25Ta25W25 and V20Nb20Mo20Ta20W20 refractory high entropy alloys. Intermetallics, 2011. 19(5): p. 698-706. 6. Schuh, B., et al., Mechanical properties, microstructure and thermal stability of a nanocrystalline CoCrFeMnNi high-entropy alloy after severe plastic deformation. Acta Materialia, 2015. 96: p. 258-268. 7. Slone, C., et al., Achieving ultra-high strength and ductility in equiatomic CrCoNi with partially recrystallized microstructures. Acta Materialia, 2019. 165: p. 496-507. 8. Hsieh, K.-C., et al., The microstructure and phase equilibrium of new high performance high-entropy alloys. Journal of Alloys and Compounds, 2009. 483(1-2): p. 209-212. 9. He, J., et al., A precipitation-hardened high-entropy alloy with outstanding tensile properties. Acta Materialia, 2016. 102: p. 187-196. 10. Gludovatz, B., et al., Exceptional damage-tolerance of a medium-entropy alloy CrCoNi at cryogenic temperatures. Nature communications, 2016. 7(1): p. 10602. 11. Gan, B., et al., Superb cryogenic strength of equiatomic CrCoNi derived from gradient hierarchical microstructure. Journal of Materials Science & Technology, 2019. 35(6): p. 957-961. 12. Zou, Y., et al., Size-dependent plasticity in an Nb25Mo25Ta25W25 refractory high-entropy alloy. Acta Materialia, 2014. 65: p. 85-97. 13. Senkov, O., et al., Refractory high-entropy alloys. Intermetallics, 2010. 18(9): p. 1758-1765. 14. Nene, S., et al., Corrosion-resistant high entropy alloy with high strength and ductility. Scripta Materialia, 2019. 166: p. 168-172. 15. Qiu, X.-W., et al., Microstructure and corrosion resistance of AlCrFeCuCo high entropy alloy. Journal of alloys and compounds, 2013. 549: p. 195-199. 16. Shi, Y., B. Yang, and P.K. Liaw, Corrosion-resistant high-entropy alloys: A review. Metals, 2017. 7(2): p. 43. 17. Youssef, K., et al., Effect of stacking fault energy on mechanical behavior of bulk nanocrystalline Cu and Cu alloys. Acta Materialia, 2011. 59(14): p. 5758-5764. 18. Kubilay, R.E. and W. Curtin, Theory of twin strengthening in fcc high entropy alloys. Acta Materialia, 2021. 216: p. 117119. 19. Mahajan, S. and G. Chin, Formation of deformation twins in fcc crystals. Acta metallurgica, 1973. 21(10): p. 1353-1363. 20. Su, J., D. Raabe, and Z. Li, Hierarchical microstructure design to tune the mechanical behavior of an interstitial TRIP-TWIP high-entropy alloy. Acta Materialia, 2019. 163: p. 40-54. 21. Okamoto, N.L., et al., Size effect, critical resolved shear stress, stacking fault energy, and solid solution strengthening in the CrMnFeCoNi high-entropy alloy. Scientific reports, 2016. 6(1): p. 35863. 22. Laplanche, G., et al., Reasons for the superior mechanical properties of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi. Acta Materialia, 2017. 128: p. 292-303. 23. Liu, S., et al., Stacking fault energy of face-centered-cubic high entropy alloys. Intermetallics, 2018. 93: p. 269-273. 24. Otto, F., et al., The influences of temperature and microstructure on the tensile properties of a CoCrFeMnNi high-entropy alloy. Acta Materialia, 2013. 61(15): p. 5743-5755. 25. Liu, D., et al., Exceptional fracture toughness of CrCoNi-based medium-and high-entropy alloys at 20 kelvin. Science, 2022. 378(6623): p. 978-983. 26. Zhang, R., et al., Short-range order and its impact on the CrCoNi medium-entropy alloy. Nature, 2020. 581(7808): p. 283-287. 27. Schneider, M., et al., Analysis of strengthening due to grain boundaries and annealing twin boundaries in the CrCoNi medium-entropy alloy. International Journal of Plasticity, 2020. 124: p. 155-169. 28. Shankar, V., K.B.S. Rao, and S. Mannan, Microstructure and mechanical properties of Inconel 625 superalloy. Journal of nuclear materials, 2001. 288(2-3): p. 222-232. 29. Zhao, S., et al., Microstructural stability and mechanical properties of a new nickel-based superalloy. Materials Science and Engineering: A, 2003. 355(1-2): p. 96-105. 30. Pollock, T.M. and S. Tin, Nickel-based superalloys for advanced turbine engines: chemistry, microstructure and properties. Journal of propulsion and power, 2006. 22(2): p. 361-374. 31. Wu, Q., et al., Microstructure of long-term aged IN617 Ni-base superalloy. Metallurgical and materials transactions A, 2008. 39(11): p. 2569-2585. 32. Akca, E. and A. Gürsel, A review on superalloys and IN718 nickel-based INCONEL superalloy. Periodicals of engineering and natural sciences, 2015. 3(1). 33. Zhao, Y.L., et al., Heterogeneous precipitation behavior and stacking-fault-mediated deformation in a CoCrNi-based medium-entropy alloy. Acta Materialia, 2017. 138: p. 72-82. 34. Shun, T.-T., et al., Age heat treatment of the CoCrFeNiTi0. 3 high-entropy alloy. Materials transactions, 2018. 59(5): p. 730-733. 35. Tong, Y., et al., Outstanding tensile properties of a precipitation-strengthened FeCoNiCrTi0. 2 high-entropy alloy at room and cryogenic temperatures. Acta Materialia, 2019. 165: p. 228-240. 36. Zhou, J., et al., Excellent strength-ductility in Ti-alloyed Fe35Ni35Cr20Mn10 high-entropy alloy. Intermetallics, 2022. 148: p. 107637. 37. Hung, W.-J., T.-T. Shun, and C.-J. Chiang, Effects of reducing Co content on microstructure and mechanical properties of CoxCrFeNiTi0. 3 high-entropy alloys. Materials Chemistry and Physics, 2018. 210: p. 170-175. 38. Clementi, E. and D.-L. Raimondi, Atomic screening constants from SCF functions. The Journal of Chemical Physics, 1963. 38(11): p. 2686-2689. 39. Zhao, Y., et al., Heterogeneous precipitation behavior and stacking-fault-mediated deformation in a CoCrNi-based medium-entropy alloy. Acta Materialia, 2017. 138: p. 72-82. 40. Chen, D., et al., Synergistic effect of Ti and Al on L12-phase design in CoCrFeNi-based high entropy alloys. Intermetallics, 2019. 110: p. 106476. 41. Wang, Z., et al., Effect of coherent L12 nanoprecipitates on the tensile behavior of a fcc-based high-entropy alloy. Materials Science and Engineering: A, 2017. 696: p. 503-510. 42. Yang, T., et al., L12-strengthened high-entropy alloys for advanced structural applications. Journal of Materials Research, 2018. 33(19): p. 2983-2997. 43. Slone, C., et al., Deactivating deformation twinning in medium-entropy CrCoNi with small additions of aluminum and titanium. Scripta Materialia, 2020. 178: p. 295-300. 44. Hsu, C.-y., et al., Wear resistance and high-temperature compression strength of Fcc CuCoNiCrAl0. 5Fe alloy with boron addition. Metallurgical and Materials Transactions A, 2004. 35(5): p. 1465-1469. 45. Tsai, K.-Y., M.-H. Tsai, and J.-W. Yeh, Sluggish diffusion in co–cr–fe–mn–ni high-entropy alloys. Acta Materialia, 2013. 61(13): p. 4887-4897. 46. Tong, C.-J., et al., Microstructure characterization of Al x CoCrCuFeNi high-entropy alloy system with multiprincipal elements. Metallurgical and Materials Transactions A, 2005. 36(4): p. 881-893. 47. Tong, C.-J., et al., Mechanical performance of the Al x CoCrCuFeNi high-entropy alloy system with multiprincipal elements. Metallurgical and Materials Transactions A, 2005. 36(5): p. 1263-1271. 48. Zhang, Y., et al., Solid‐solution phase formation rules for multi‐component alloys. Advanced engineering materials, 2008. 10(6): p. 534-538. 49. Sheng, G. and C.T. Liu, Phase stability in high entropy alloys: Formation of solid-solution phase or amorphous phase. Progress in Natural Science: Materials International, 2011. 21(6): p. 433-446. 50. J.-W. Yeh, S.-K.C., S.-J. Lin,J.-Y. Gan,T.-S. Chin,T.-T. Shun,C.-H. Tsau,S.-Y. Chang, Nanostructured High-Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and Outcomes. Advanced Engineering Materials, 2004. 51. CHUNG-JIN TONG, Y.-L.C., SWE-KAI CHEN, JIEN-WEI YEH, and C.-H.T. TAO-TSUNG SHUN, SU-JIEN LIN and SHOU-YI CHANG, Microstructure Characterization of AlxCoCrCuFeNi High-Entropy Alloy System with Multiprincipal Elements. METALLURGICAL AND MATERIALS TRANSACTIONS A, 2005. 36A. 52. Zhang, Y., S.G. Ma, and J.W. Qiao, Morphology Transition from Dendrites to Equiaxed Grains for AlCoCrFeNi High-Entropy Alloys by Copper Mold Casting and Bridgman Solidification. Metallurgical and Materials Transactions A, 2012. 43(8): p. 2625-2630. 53. Laplanche, G., et al., Microstructure evolution and critical stress for twinning in the CrMnFeCoNi high-entropy alloy. Acta Materialia, 2016. 118: p. 152-163. 54. Laplanche, G., et al., Reasons for the superior mechanical properties of medium-entropy CrCoNi compared to high-entropy CrMnFeCoNi. Acta Materialia, 2017. 128: p. 292-303. 55. Chang, H., et al., Novel Si-added CrCoNi medium entropy alloys achieving the breakthrough of strength-ductility trade-off. Materials & Design, 2021. 197: p. 109202. 56. Miao, J., et al., Ordering effects on deformation substructures and strain hardening behavior of a CrCoNi based medium entropy alloy. Acta Materialia, 2021. 210. 57. Locq, D. and P. Caron, On some advanced nickel-based superalloys for disk applications. Aerospace Lab, 2011(3): p. p. 1-9. 58. Ding, Q., et al., Re segregation at interfacial dislocation network in a nickel-based superalloy. Acta Materialia, 2018. 154: p. 137-146. 59. Sims, C. and N. Stoloff, WC Hagel in Superalloys II. 1986, Wiley, New York. 60. Sims, C.T., N.S. Stoloff, and W.C. Hagel, superalloys II. Vol. 8. 1987: Wiley New York. 61. Durand-Charre, M., The Microstructure of Superalloys, Gordon and Breach. 1997, Amsterdam. 62. Biermann, H., M. Strehler, and H. Mughrabi, High-temperature X-ray measurements of the lattice mismatch of creep-deformed monocrystals of the nickel-base superalloy SRR99. Scripta metallurgica et materialia, 1995. 32(9): p. 1405-1410. 63. Biermann, H., M. Strehler, and H. Mughrabi, High-temperature measurements of lattice parameters and internal stresses of a creep-deformed monocrystalline nickel-base superalloy. Metallurgical and Materials Transactions A, 1996. 27(4): p. 1003-1014. 64. Volek, A., et al., Partitioning of Re between γ and γ′ phase in nickel-base superalloys. Scripta Materialia, 2005. 52(2): p. 141-145. 65. Van Sluytman, J. and T. Pollock, Optimal precipitate shapes in nickel-base γ–γ′ alloys. Acta Materialia, 2012. 60(4): p. 1771-1783. 66. Ru, Y., et al., Interdendritic Mo homogenization and sub-solidus melting during solution treatment in the Mo-strengthening single crystal superalloys. Journal of Alloys and Compounds, 2016. 662: p. 431-435. 67. Cheng, K., et al., Precipitation behavior of μ phase and creep rupture in single crystal superalloy CMSX-4. Journal of Alloys and Compounds, 2011. 509(25): p. 7078-7086. 68. Lv, X., J. Zhang, and Q. Feng, The promotion of Ru on topologically close-packed phase precipitation in the high Cr-containing (∼ 9wt.%) nickel-base single crystal superalloy. Journal of Alloys and Compounds, 2015. 648: p. 853-857. 69. Long, H., et al., Minimum interface misfit criterion for the precipitation morphologies of TCP phases in a Ni-based single crystal superalloy. Intermetallics, 2018. 94: p. 55-64. 70. Gwalani, B., et al., Optimizing the coupled effects of Hall-Petch and precipitation strengthening in a Al0. 3CoCrFeNi high entropy alloy. Materials & Design, 2017. 121: p. 254-260. 71. Gwalani, B., et al., Cu assisted stabilization and nucleation of L12 precipitates in Al0. 3CuFeCrNi2 fcc-based high entropy alloy. Acta Materialia, 2017. 129: p. 170-182. 72. Borkar, T., et al., A combinatorial assessment of AlxCrCuFeNi2 (0< x< 1.5) complex concentrated alloys: Microstructure, microhardness, and magnetic properties. Acta Materialia, 2016. 116: p. 63-76. 73. Antonov, S., M. Detrois, and S. Tin, Design of novel precipitate-strengthened Al-Co-Cr-Fe-Nb-Ni high-entropy superalloys. Metallurgical and Materials Transactions A, 2018. 49(1): p. 305-320. 74. Ma, S. and Y. Zhang, Effect of Nb addition on the microstructure and properties of AlCoCrFeNi high-entropy alloy. Materials Science and Engineering: A, 2012. 532: p. 480-486. 75. Tsao, T.-K., A.-C. Yeh, and H. Murakami, The Microstructure Stability of Precipitation Strengthened Medium to High Entropy Superalloys. Metallurgical and Materials Transactions A, 2017. 48(5): p. 2435-2442. 76. Takeuchi, A. and A. Inoue, Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element. Materials transactions, 2005. 46(12): p. 2817-2829. 77. Karunaratne, M., C. Rae, and R. Reed, On the microstructural instability of an experimental nickel-based single-crystal superalloy. Metallurgical and Materials transactions A, 2001. 32(10): p. 2409-2421. 78. Ritzert, F., D. Keller, and V. Vasudevan, Investigation of the Formation of Topologically Close Packed Phase Instabilities in Nickel-Based Superalloy Rene N6. 1999. 79. Zhao, J.-C., M. Larsen, and V. Ravikumar, Phase precipitation and time–temperature-transformation diagram of Hastelloy X. Materials Science and Engineering: A, 2000. 293(1-2): p. 112-119. 80. Yeh, A., et al., Developing an advanced Si-bearing DS Ni-base superalloy. Journal of alloys and compounds, 2014. 585: p. 614-621. 81. Otto, F., et al., Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys. Acta Materialia, 2013. 61(7): p. 2628-2638. 82. Troparevsky, M.C., et al., Criteria for Predicting the Formation of Single-Phase High-Entropy Alloys. Physical Review X, 2015. 5(1). 83. Zhao, Y., et al., Thermal stability and coarsening of coherent particles in a precipitation-hardened (NiCoFeCr) 94Ti2Al4 high-entropy alloy. Acta Materialia, 2018. 147: p. 184-194. 84. Fu, B., et al., Deformation mechanisms in a Co-rich nickel based superalloy with different size of γ׳ precipitates. Materials Letters, 2015. 152: p. 272-275. 85. Chaturvedi, M., D. Lloyd, and D. Chung, Yielding behaviour of γ′-precipitation-strengthened Co–Ni–Cr superalloys. Metal Science, 1976. 10(11): p. 373-378. 86. Reppich, B., P. Schepp, and G. Wehner, Some new aspects concerning particle hardening mechanisms in γ'precipitating nickel-base alloys—II. Experiments. Acta Metallurgica, 1982. 30(1): p. 95-104. 87. Miao, J., T.M. Pollock, and J.W. Jones, Microstructural extremes and the transition from fatigue crack initiation to small crack growth in a polycrystalline nickel-base superalloy. Acta Materialia, 2012. 60(6-7): p. 2840-2854. 88. Hansen, N. and D. Kuhlmann-Wilsdorf, Low energy dislocation structures due to unidirectional deformation at low temperatures. Materials Science and Engineering, 1986. 81: p. 141-161. 89. Chen, H.S., J.J. Gilman, and A. Head, Dislocation Multipoles and Their Role in Strain‐Hardening. Journal of Applied Physics, 1964. 35(8): p. 2502-2514. 90. Miao, J., et al., The evolution of the deformation substructure in a Ni-Co-Cr equiatomic solid solution alloy. Acta Materialia, 2017. 132: p. 35-48. 91. Byun, T., On the stress dependence of partial dislocation separation and deformation microstructure in austenitic stainless steels. Acta Materialia, 2003. 51(11): p. 3063-3071. 92. Gerold, V. and H. Karnthaler, On the origin of planar slip in fcc alloys. Acta Metallurgica, 1989. 37(8): p. 2177-2183. 93. Idrissi, H., et al., On the mechanism of twin formation in Fe–Mn–C TWIP steels. Acta Materialia, 2010. 58(7): p. 2464-2476. 94. Kamikawa, N., et al., Stress–strain behavior of ferrite and bainite with nano-precipitation in low carbon steels. Acta Materialia, 2015. 83: p. 383-396. 95. Fleischer, R.L., Substitutional solution hardening. Acta metallurgica, 1963. 11(3): p. 203-209. 96. Courtney, T.H., Mechanical behavior of materials. 2005: Waveland Press. 97. Toda-Caraballo, I. and P.E. Rivera-Díaz-del-Castillo, Modelling solid solution hardening in high entropy alloys. Acta Materialia, 2015. 85: p. 14-23. 98. Schuh, C., T. Nieh, and H. Iwasaki, The effect of solid solution W additions on the mechanical properties of nanocrystalline Ni. Acta Materialia, 2003. 51(2): p. 431-443. 99. Hall, E., The deformation and ageing of mild steel: III discussion of results. Proceedings of the Physical Society. Section B, 1951. 64(9): p. 747. 100. Williamson, G. and W. Hall, X-ray line broadening from filed aluminium and wolfram. Acta metallurgica, 1953. 1(1): p. 22-31. 101. Williamson, G. and R. Smallman, III. Dislocation densities in some annealed and cold-worked metals from measurements on the X-ray debye-scherrer spectrum. Philosophical magazine, 1956. 1(1): p. 34-46. 102. Karolus, M. and E. Łągiewka, Crystallite size and lattice strain in nanocrystalline Ni–Mo alloys studied by Rietveld refinement. Journal of Alloys and Compounds, 2004. 367(1-2): p. 235-238. 103. Kumari, S., D.K. Singh, and P. Giri, Strain anisotropy in freestanding germanium nanoparticles synthesized by ball milling. Journal of Nanoscience and Nanotechnology, 2009. 9(9): p. 5231-5236. 104. Zhao, Y., et al., Microstructures and mechanical properties of ultrafine grained 7075 Al alloy processed by ECAP and their evolutions during annealing. Acta Materialia, 2004. 52(15): p. 4589-4599. 105. Wen, H., et al., Strengthening mechanisms in a high-strength bulk nanostructured Cu–Zn–Al alloy processed via cryomilling and spark plasma sintering. Acta Materialia, 2013. 61(8): p. 2769-2782. 106. Ma, K., et al., Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy. Acta Materialia, 2014. 62: p. 141-155. 107. Seidman, D.N., E.A. Marquis, and D.C. Dunand, Precipitation strengthening at ambient and elevated temperatures of heat-treatable Al (Sc) alloys. Acta Materialia, 2002. 50(16): p. 4021-4035. 108. Booth-Morrison, C., D.C. Dunand, and D.N. Seidman, Coarsening resistance at 400 C of precipitation-strengthened Al–Zr–Sc–Er alloys. Acta Materialia, 2011. 59(18): p. 7029-7042. 109. Pollock, T. and A. Argon, Creep resistance of CMSX-3 nickel base superalloy single crystals. Acta Metallurgica et Materialia, 1992. 40(1): p. 1-30. 110. Knorovsky, G., et al., Inconel 718: a solidification diagram. Metallurgical transactions A, 1989. 20(10): p. 2149-2158. 111. Chung, T.-F., et al., Hierarchical nanotwins in Fe27Co24Ni23Cr26 high-entropy alloy subjected to high strain-rate Hopkinson bar deformation. Materials Characterization, 2022. 185: p. 111737. 112. Tiamiyu, A.A., et al., Nanotwinning-assisted dynamic recrystallization at high strains and strain rates. Nature Materials, 2022. 21(7): p. 786-794. 113. Stein, F., M. Palm, and G. Sauthoff, Structure and stability of Laves phases. Part I. Critical assessment of factors controlling Laves phase stability. Intermetallics, 2004. 12(7-9): p. 713-720. | - |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/88815 | - |
dc.description.abstract | 高熵合金擁有優異的機械性能,其中以CrCoNi三元中熵合金表現最為突出。然而,單相面心立方高熵合金與中熵合金的降伏強度僅有200 MPa至500 MPa,並不適合應用於需要高降伏強度的環境中。因此,本研究設計L12析出強化中熵合金(CrCoNi)94Al3Nb3,透過在700°C和800°C進行時效處理,在FCC基底中引入均勻分布的L12-Ni3(Al,Nb)奈米析出物,以提高FCC型的中熵合金的降伏強度和機械性能。在微結構分析顯示顯示,L12-Ni3(Al,Nb)的尺寸約為5至10奈米且在FCC基底當中分布的非常均勻,此外,也發現尚未被報導過的δ相轉變與HCP相生成。在拉伸試驗中,經過700oC尖峰時效處理後降伏強度和極限拉伸強度分別達到1412 ± 22 MPa與1553 ± 45 MPa,且伸長率達到7.8 ± 0.94 %。在霍普金森快速撞擊試驗中,相較於未進行析出的中熵合金FeCrCoNi,(CrCoNi)94Al3Nb3在相同真實應變量下,達到約2600MPa的真實應力,約為FeCrCoNi的兩倍強度,展現其優異的衝擊性能。在變形組織分析中,本研究,探討L12析出物與缺陷、疊差和變形雙晶之間的相互作用,也探討造成材料延展性下降與高降伏強度的因素。 | zh_TW |
dc.description.abstract | High-entropy alloys (HEAs) exhibit excellent mechanical properties, with the CrCoNi ternary medium-entropy alloy being particularly outstanding. However, the yield strength of single-phase face-centered cubic (FCC) high-entropy alloys (HEAs) and medium-entropy alloys (MEAs) ranges approximately from 200 MPa to 500 MPa, which is not suitable for applications requiring high yield strength. Therefore, in this study, a L12 precipitate-hardening MEA, (CrCoNi)94Al3Nb3, was designed. Through aging treatments at 700°C and 800°C, uniformly distributed L12-Ni3(Al,Nb) nanoscale precipitates were introduced into the FCC matrix to enhance the yield strength of the FCC-type MEA. Microstructure analysis revealed that the L12-Ni3(Al,Nb) precipitates had sizes of approximately 5 to 10 nanometers and were distributed very uniformly within the FCC matrix. Additionally, the transformation of δ phase and the generation of hexagonal close-packed (HCP) phase were also observed. In tensile tests, after peak aging treatment at 700°C, the yield strength and ultimate tensile strength reached 1412 ± 22 MPa and 1553 ± 45 MPa, respectively, with an elongation of 7.8 ± 0.94%. In Hopkinson bar impact tests, (CrCoNi)94Al3Nb3 demonstrated a true stress of approximately 2600 MPa with 20% true strain, showing twice the strength of FeCrCoNi and exhibiting excellent impact performance compared to the non-precipitated medium-entropy alloy FeCrCoNi. In the deformation microstructure analysis, this study explored the interactions between L12 precipitates and defects, stacking faults, and deformation twins. It also investigated the factors contributing to the reduction in material ductility and the high yield strength. | en |
dc.description.provenance | Submitted by admin ntu (admin@lib.ntu.edu.tw) on 2023-08-15T17:54:02Z No. of bitstreams: 0 | en |
dc.description.provenance | Made available in DSpace on 2023-08-15T17:54:02Z (GMT). No. of bitstreams: 0 | en |
dc.description.tableofcontents | Acknowledgements i
摘要 ii Abstract iii List of Figures viii List of Tables xv Chapter One Introduction 1 Chapter Two Literature Review 8 2.1 High-entropy alloy 8 2.1.1 Core effects in high-entropy alloys 8 2.1.2 Crystal structures in high-entropy alloys 12 2.1.3 High-entropy alloy categorization 14 2.2 Concepts of precipitation in nickel-based superalloys related to high-entropy Alloys 20 2.2.1 Strengthening mechanisms and microstructures in Ni-based superalloys 22 2.2.2 Influence of lattice misfit in Ni-based superalloys 25 2.2.3 TCP phases in Ni-based superalloys 27 2.3 Alloy design 30 2.3.1 The impact of adding Al on high-entropy alloys 30 2.3.2 The impact of adding Ti on high-entropy alloys 31 2.3.3 The impact of adding Nb on high-entropy alloys 32 2.4 Thermal stability of L12 phase 36 2.4.1 Fundamentals of high-entropy alloys and Ni-based superalloys 36 2.4.2 Thermal stability of L12 precipitates 45 2.5 Mechanical properties and microstructures of L12 precipitate hardening high-entropy alloys 48 2.5.1 Introduction to high-entropy alloy precipitate hardening 48 2.5.2 Dislocation pair and anti-phase boundary 51 2.5.3 Impacts of L12 phase on the deformation mechanism 57 2.5.4 Microstructure of precipitation strengthened high entropy alloy of typical L12 phase 58 2.5.5 Quantification of various strengthening mechanisms in high-entropy alloys 62 2.6 Conclusion 74 Chapter Three Experiment designs and procedures 76 3.1 Introduction 76 3.1.1 Experiment material 78 3.1.2 Heat treatments 78 3.1.3 Hot rolling methods 79 3.1.4 Tensile test 82 3.1.5 Hopkinson compression test 82 3.2 Experimental instruments and equipment. 83 3.2.1 Rolling machine 83 3.2.2 MTS Landmark tensile test machine 83 3.2.3 Hopkinson bar compression test 84 3.2.4 Electron Probe Microanalysis (EPMA) 85 3.2.5 Differential Scanning Calorimetry (DSC) 86 3.2.6 Scanning electron microscope (SEM) 87 3.2.7 Transmission electron microscope (TEM) 88 3.3 Conclusion 90 Chapter Four Microstructure and Mechanical Properties of (CrCoNi)94Al3Nb3 91 4.1 Introduction 91 4.2 Homogenization and recrystallization 92 4.2.1 As-cast microstructures 92 4.2.2 Incipient melting and homogenization microstructures 95 4.2.3 Quantitative elements analysis 99 4.2.4 Optimal recrystallization processes 102 4.3 Aging and phase identification 106 4.3.1 Peak aging identification 106 4.3.2 Coherent precipitate analysis 108 4.3.3 Incoherent precipitates analysis 119 4.3.4 Thermo-calc simulation 125 4.3.5 Delta phase transformation 128 4.4 Mechanical properties 132 4.4.1 Tensile test 132 4.4.2 Tensile test microstructure characterization 135 4.4.3 Hopkinson bar compression test 142 4.4.4 Hopkinson bar compression test microstructure characterization 145 4.5 Conclusion 151 Chapter Five Future Works 153 Supplementary Materials Crystal Structures of Phases in (CrCoNi)94Al3Nb3 156 Reference 158 | - |
dc.language.iso | en | - |
dc.title | L12析出強化型中熵合金(CrCoNi)94Al3Nb3之顯微結構與機械性質分析 | zh_TW |
dc.title | Microstructure and Mechanical Properties Characterization of L12-precipitate Hardening (CrCoNi)94Al3Nb3 Medium-entropy-alloy | en |
dc.type | Thesis | - |
dc.date.schoolyear | 111-2 | - |
dc.description.degree | 碩士 | - |
dc.contributor.oralexamcommittee | 黃慶淵;李驊登;蔡劭璞 | zh_TW |
dc.contributor.oralexamcommittee | Cing-Yuan Huang;Hwa-Teng Lee;Shao-Pu Tsai | en |
dc.subject.keyword | 中熵合金,析出強化,顯微結構分析, | zh_TW |
dc.subject.keyword | Medium-entropy alloy,precipitate hardening,microstrcuture characterization, | en |
dc.relation.page | 165 | - |
dc.identifier.doi | 10.6342/NTU202302391 | - |
dc.rights.note | 同意授權(全球公開) | - |
dc.date.accepted | 2023-08-09 | - |
dc.contributor.author-college | 工學院 | - |
dc.contributor.author-dept | 材料科學與工程學系 | - |
顯示於系所單位: | 材料科學與工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-111-2.pdf | 14.86 MB | Adobe PDF | 檢視/開啟 |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。