請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/88595
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 薛人愷 | zh_TW |
dc.contributor.advisor | Ren-Kae Shiue | en |
dc.contributor.author | 王耀智 | zh_TW |
dc.contributor.author | Yao-Chih Wang | en |
dc.date.accessioned | 2023-08-15T16:59:19Z | - |
dc.date.available | 2023-11-09 | - |
dc.date.copyright | 2023-08-15 | - |
dc.date.issued | 2023 | - |
dc.date.submitted | 2023-08-02 | - |
dc.identifier.citation | [1] L. Chang and T. Read, "Behavior of the elastic properties of AuCd," Trans Met Soc AIME, vol. 191, p. 47, 1951.
[2] M. W. Burkart and T. Read, "Diffusionless phase change in the indium-thallium system," Transactions of the American Institute of Mining and Metallurgical Engineers, vol. 197, no. 11, pp. 1516-1524, 1953. [3] E. Hornbogen and G. Wassermann, "Über den Einfluß von Spannungen und das Auftreten von Umwandlungsplastizität bei der Beta1-Beta”-Umwandlung des Messings," International Journal of Materials Research, vol. 47, no. 6, pp. 427-433, 1956. [4] W. J. Buehler, J. V. Gilfrich, and R. C. Wiley, "Effect of Low-Temperature Phase Changes on the Mechanical Properties of Alloys near Composition TiNi," Journal of Applied Physics, vol. 34, pp. 1475-1477, May 01, 1963 1963, doi: 10.1063/1.1729603. [5] T. Tadaki and C. Wayman, "Crystal structure and microstructure of a cold worked TiNi alloy with unusual elastic behavior," Scripta metallurgica, vol. 14, no. 8, pp. 911-914, 1980. [6] K. Otsuka and K. Shimizu, "Pseudoelasticity and shape memory effects in alloys," International Metals Reviews, vol. 31, no. 1, pp. 93-114, 1986/01/01 1986, doi: 10.1179/imtr.1986.31.1.93. [7] R. Hehemann and G. Sandrock, "Relations between the premartensitic instability and the martensite structure in TiNi," Scripta Metallurgica, vol. 5, no. 9, pp. 801-805, 1971. [8] R. Wasilewski, S. Butler, J. Hanlon, and D. Worden, "Homogeneity range and the martensitic transformation in TiNi," Metallurgical Transactions, vol. 2, pp. 229-238, 1971. [9] K. Otsuka, T. Sawamura, K. Shimizu, and C. Wayman, "Characteristics of the martensitic transformation in TiNi and the memory effect," Metallurgical Transactions, vol. 2, pp. 2583-2588, 1971. [10] K. Otsuka, T. Sawamura, and K. Shimizu, "Crystal structure and internal defects of equiatomic TiNi martensite," Physica status solidi (a), vol. 5, no. 2, pp. 457-470, 1971. [11] Y. Kudoh, M. Tokonami, S. Miyazaki, and K. Otsuka, "Crystal structure of the martensite in Ti-49.2 at.% Ni alloy analyzed by the single crystal X-ray diffraction method," Acta Metallurgica, vol. 33, no. 11, pp. 2049-2056, 1985. [12] M. Nishida, C. M. Wayman, and T. Honma, "Precipitation processes in near-equiatomic TiNi shape memory alloys," Metallurgical Transactions A, vol. 17, pp. 1505-1515, 1986. [13] G. D. Sandrock, A. J. Perkins, and R. F. Hehemann, "The premartensitic instability in near-equiatomic TiNi," Metallurgical Transactions, vol. 2, no. 10, pp. 2769-2781, 1971/10/01 1971, doi: 10.1007/BF02813251. [14] J. Bai, Y. Xu, X. He, C. Li, and M. Zhu, "Progress in biocompatibility and surface modification of nickel titanium shape memory alloys," Zhongguo xiu fu chong jian wai ke za zhi= Zhongguo xiufu chongjian waike zazhi= Chinese journal of reparative and reconstructive surgery, vol. 32, no. 8, pp. 1091-1095, 2018. [15] A. McKelvey and R. Ritchie, "Fatigue‐crack propagation in Nitinol, a shape‐memory and superelastic endovascular stent material," Journal of Biomedical Materials Research: An Official Journal of The Society for Biomaterials, The Japanese Society for Biomaterials, and The Australian Society for Biomaterials and the Korean Society for Biomaterials, vol. 47, no. 3, pp. 301-308, 1999. [16] M. Behl and A. Lendlein, "Shape-memory polymers," Materials today, vol. 10, no. 4, pp. 20-28, 2007. [17] K. Otsuka, "Origin of memory effect in Cu-Al-Ni alloy," Japanese Journal of Applied Physics, vol. 10, no. 5, p. 571, 1971. [18] K. Otsuka and X. Ren, "Physical metallurgy of Ti–Ni-based shape memory alloys," Progress in materials science, vol. 50, no. 5, pp. 511-678, 2005. [19] S. Miyazaki, Y. Ohmi, K. Otsuka, and Y. Suzuki, "Characteristics of deformation and transformation pseudoelasticity in Ti-Ni alloys," Le Journal de Physique Colloques, vol. 43, no. C4, pp. C4-255-C4-260, 1982. [20] P. Thamburaja, H. Pan, and F. Chau, "Martensitic reorientation and shape-memory effect in initially textured polycrystalline Ti–Ni sheet," Acta materialia, vol. 53, no. 14, pp. 3821-3831, 2005. [21] C. Lexcellent, S. Leclercq, B. Gabry, and G. Bourbon, "The two way shape memory effect of shape memory alloys: an experimental study and a phenomenological model," International Journal of Plasticity, vol. 16, no. 10-11, pp. 1155-1168, 2000. [22] M. Belkacem and B. Samir, "Modeling of the Two-Way Shape Memory Effect," in Shape-Memory Materials: IntechOpen, 2018. [23] Y. Liu, Y. Liu, and J. Van Humbeeck, "Two-way shape memory effect developed by martensite deformation in NiTi," Acta materialia, vol. 47, no. 1, pp. 199-209, 1998. [24] J. Perkins and D. Hodgson, "The two-way shape memory effect," Engineering aspects of shape memory alloys, pp. 195-206, 1990. [25] P. Prader and A. C. Kneissl, "Deformation behaviour and two-way shape memory effect of NiTi alloys," International Journal of Materials Research, vol. 88, no. 5, pp. 410-415, 2021. [26] R. Lahoz, L. Gracia-Villa, and J. A. Pue´ rtolas, "Training of the two-way shape memory effect by bending in NiTi alloys," J. Eng. Mater. Technol., vol. 124, no. 4, pp. 397-401, 2002. [27] M. Nishida and T. Honma, "All-round shape memory effect in Ni-rich TiNi alloys generated by constrained aging," Scripta metallurgica, vol. 18, no. 11, pp. 1293-1298, 1984. [28] S. Miyazaki and R. Sachdeva, "Shape memory effect and superelasticity in Ti—Ni alloys," in Shape memory alloys for biomedical applications: Elsevier, 2009, pp. 3-19. [29] C. Naresh, P. Bose, and C. Rao, "Shape memory alloys: a state of art review," in IOP conference series: materials science and engineering, 2016, vol. 149, no. 1: IOP Publishing, p. 012054. [30] R. W. Cahn, "Binary alloy phase diagrams–second edition. TB Massalski, Editor‐in‐Chief; H. Okamoto, PR Subramanian, L. Kacprzak, Editors. ASM international, Materials Park, Ohio, USA. December 1990. xxii, 3589 pp., 3 vol., hard‐back. $995.00 the set," ed: Wiley Online Library, 1991. [31] T. Honma, T. Matsumoto, Y. Shugo, and M. Nishida, "Annual Research Report," Res. Rep. Nucl. Sci. Lab. Tohoku Univ, vol. 12, pp. 183-190, 1979. [32] M. Mueller and H. Knott, "Trans. Met. Soc. AIME," 1963. [33] D. Koskimaki, M. Marcinkowski, and A. Sastri, "Solid state diffusional transformations in the near-equiatomic Ni-Ti alloys(Phase changes in Ni/Ti alloys with equiatomic composition, resolving discrepancy on nonMartensitic eutectoidal decomposition of B 2 structure and intermediate precipitate)," METALLURGICAL SOCIETY OF AIME, TRANSACTIONS, vol. 245, pp. 1883-1890, 1969. [34] T. Tadaki, Y. Nakata, K. Shimizu, and K. Otsuka, "Crystal structure, composition and Premartensitic Transformations in TiNi Alloy 273 morphology of a precipitate in an aged Ti-51 at./o Ni shape memory alloy," Trans JIM, vol. 27, pp. 731-740, 1986. [35] T. Saburi, S. Nenno, and T. Fukuda, "Further electron microscopy studies of the Ti11 Ni14 phase in an aged Ti–52 at% Ni shape memory alloy," J Less-Comm Metals, vol. 125, pp. 157-163, 1986. [36] M. Wechsler, "On the theory of martensitic transformations. The generalized lattice invariant shear and the degeneracy of solutions for the cubic to tetragonal transformation," Acta metallurgica, vol. 7, no. 12, pp. 793-802, 1959. [37] K. Otsuka, "Crystallography of martensitic transformations and lattice invariant shears," in Materials Science Forum, 1990, vol. 56: Trans Tech Publ, pp. 393-404. [38] K. Knowles and D. Smith, "The crystallography of the martensitic transformation in equiatomic nickel-titanium," Acta Metallurgica, vol. 29, no. 1, pp. 101-110, 1981. [39] S. Miyazaki and K. Otsuka, "Deformation and transition behavior associated with the R-phase in Ti-Ni alloys," Metallurgical Transactions A, vol. 17, pp. 53-63, 1986. [40] Y. Zhou et al., "Strain glass in doped Ti50 (Ni50− xDx)(D= Co, Cr, Mn) alloys: Implication for the generality of strain glass in defect-containing ferroelastic systems," Acta Materialia, vol. 58, no. 16, pp. 5433-5442, 2010. [41] M.-S. Choi, T. Fukuda, and T. Kakeshita, "Anomalies in resistivity, magnetic susceptibility and specific heat in iron-doped Ti–Ni shape memory alloys," Scripta materialia, vol. 53, no. 7, pp. 869-873, 2005. [42] B. Ingale, W. Wei, P. Chang, Y. Kuo, and S. Wu, "Anomalous transport and thermal properties of NiTi and with Cu and Fe-doped shape memory alloys near the martensitic transition," Journal of Applied Physics, vol. 110, no. 11, 2011. [43] N. Artyukhova, S. Anikeev, V. Promakhov, and M. Korobenkov, "The Effect of Cobalt on the Deformation Behaviour of a Porous TiNi-Based Alloy Obtained by Sintering," Materials, vol. 14, no. 24, p. 7584, 2021. [44] S.-K. Wu and C. Wayman, "On the reciprocal lattice of the “premartensitic” R-phase in TiNi shape memory alloys," Acta Metallurgica, vol. 37, no. 10, pp. 2805-2813, 1989. [45] T. Fukuda, T. Saburi, K. Doi, and S. Nenno, "Nucleation and self-accommodation of the R-phase in Ti–Ni alloys," Materials Transactions, JIM, vol. 33, no. 3, pp. 271-277, 1992. [46] S. Miyazaki and C. Wayman, "The R-phase transition and associated shape memory mechanism in Ti-Ni single crystals," Acta metallurgica, vol. 36, no. 1, pp. 181-192, 1988. [47] T. H. Nam, T. Saburi, and K. i. Shimizu, "Cu-content dependence of shape memory characteristics in Ti–Ni–Cu alloys," Materials Transactions, JIM, vol. 31, no. 11, pp. 959-967, 1990. [48] T. Tadaki and C. Wayman, "Electron microscopy studies of martensitic transformations in Ti50Ni50− xCux alloys. Part II. Morphology and crystal structure of martensites," Metallography, vol. 15, no. 3, pp. 247-258, 1982. [49] T. Saburi, Y. Watanabe, and S. Nenno, "Morphological characteristics of the orthorhombic martensite in a shape memory Ti–Ni–Cu alloy," ISIJ international, vol. 29, no. 5, pp. 405-411, 1989. [50] Y. Watanabe, T. Saburi, Y. Nakagawa, and S. Nenno, "Self-Accommodation Structure in the Ti--Ni--Cu Orthorhombic Martensite," Journal of the Japan Institute of Metals, vol. 54, no. 8, pp. 861-869, 1990. [51] V. Zel'Dovich, G. Sobyanina, and T. Novoselova, "Martensitic transformations in TiNi alloys with Ti3Ni4 precipitates," Le Journal de Physique IV, vol. 7, no. C5, pp. C5-299-C5-304, 1997. [52] X. Wang, B. Verlinden, and J. Van Humbeeck, "R-phase transformation in NiTi alloys," Materials Science and Technology, vol. 30, no. 13, pp. 1517-1529, 2014. [53] Q. Chen, X. Wu, and T. Ko, "The effects of Ti [sub 3] Ni [sub 4] precipitates on the R-phase transformation," Scripta Metallurgica et Materialia;(United States), vol. 29, no. 1, 1993. [54] H. Morawiec, D. Stroz, and D. Chrobak, "Effect of deformation and thermal treatment of NiTi alloy on transition sequence," Le Journal de Physique IV, vol. 5, no. C2, pp. C2-205-C2-210, 1995. [55] H. Morawiec, D. Stroz, T. Goryczka, and D. Chrobak, "Two-stage martensitic transformation in a deformed and annealed NiTi alloy," Scripta materialia, vol. 35, no. 4, 1996. [56] L. Bataillard, J.-E. Bidaux, and R. Gotthardt, "Interaction between microstructure and multiple-step transformation in binary NiTi alloys using in-situ transmission electron microscopy observations," Philosophical magazine A, vol. 78, no. 2, pp. 327-344, 1998. [57] J. K. Allafi, X. Ren, and G. Eggeler, "The mechanism of multistage martensitic transformations in aged Ni-rich NiTi shape memory alloys," Acta materialia, vol. 50, no. 4, pp. 793-803, 2002. [58] J. K. Allafi, A. Dlouhy, and G. Eggeler, "On the relation between Ni4Ti3-precipitation in Ni-rich NiTi shape memory alloys (during aging and creep) and martensitic transformations," in Journal de Physique IV (Proceedings), 2003, vol. 112: EDP sciences, pp. 681-684. [59] J. Allafi, A. Dlouhy, K. Neuking, and G. Eggeler, "Influence of precipitation and dislocation substructure on phase transformation temperatures in a Ni-rich NiTi-shape memory alloy," Le Journal de Physique IV, vol. 11, no. PR8, pp. Pr8-529-Pr8-534, 2001. [60] Y. Gao, L. Casalena, M. Bowers, R. Noebe, M. Mills, and Y. Wang, "An origin of functional fatigue of shape memory alloys," Acta Materialia, vol. 126, pp. 389-400, 2017. [61] J. Frenzel, "On the importance of structural and functional fatigue in shape memory technology," Shape Memory and Superelasticity, vol. 6, pp. 213-222, 2020. [62] G. S. Mammano and E. Dragoni, "Functional fatigue of shape memory wires under constant-stress and constant-strain loading conditions," Procedia Engineering, vol. 10, pp. 3692-3707, 2011. [63] H. Miyamoto, T. Taniwaki, T. Ohba, K. Otsuka, S. Nishigori, and K. Kato, "Two-stage B2–B19–B19′ martensitic transformation in a Ti50Ni30Cu20 alloy observed by synchrotron radiation," Scripta materialia, vol. 53, no. 2, pp. 171-175, 2005. [64] Z. Yang et al., "Large room-temperature elastocaloric effect in a bulk polycrystalline Ni-Ti-Cu-Co alloy with low isothermal stress hysteresis," Applied Materials Today, vol. 21, p. 100844, 2020. [65] L. Bumke, C. Zamponi, J. Jetter, and E. Quandt, "Cu-rich Ti52. 8Ni22. 2Cu22. 5Co2. 5 shape memory alloy films with ultra-low fatigue for elastocaloric applications," Journal of Applied Physics, vol. 127, no. 22, 2020. [66] H. Zheng, J. Pfetzing, J. Frenzel, and G. Eggeler, "Nanoindentation of Ti50Ni48Fe2 and Ti50Ni40Cu10 shape memory alloys," International journal of materials research, vol. 100, no. 4, pp. 594-602, 2009. | - |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/88595 | - |
dc.description.abstract | 鈦鎳基形狀記憶合金有B2⟷B19’、B2⟷R相、B2⟷B19、B2⟷R相⟷B19’及B2⟷B19 ⟷B19’等不同的多階麻田散體相變態順序,首先我們將先分析Ti50Ni40Cu9Co1及Ti50Ni40Cu8Co2這兩者之二階相變態為B2⟷R相⟷B19’或B2⟷B19 ⟷B19’,研究結果顯示當Co添加量只有1at.%時,Ti50Ni40Cu9Co1會有和Ti50Ni40Cu10相同之B2⟷B19 ⟷B19’二階相變態順序,且由於Co的添加使得麻田散體相變態之變態溫度有大幅度地下降,接著當Co添加量達到2at.%時,Co對Ti50Ni40Cu8Co2合金變態順序之影響已大於Cu之影響,因此Ti50Ni40Cu8Co2具有和Ti50Ni48Co2相同之B2⟷R相⟷B19’二階相變態順序。另一方面,本研究將探討經900℃均質化的Ti50Ni50、三元合金Ti50Ni50-xDx(D=Fe、Pd、Cu)及四元合金Ti50Ni40Cu9Co1、Ti50Ni40Cu8Co2經過50次熱循環後其變態溫度所受之影響。熱循環過程中會有不可逆之差排不斷的累積,所以變態溫度幾乎都會隨著熱循環次數增加而不斷下降,其背後原因和形狀記憶合金本身之降伏強度及不同變態順序在變態過程中產生之剪應變值s等因素有關,實驗結果顯示熱循環對不同相變態順序變態溫度之降低程度和各項變態順序之剪應變值s相同,由大到小都為: B2⟷B19’ > B2⟷B19 > B2⟷R。此外,熱循環對二階相變態其變態溫度降低之影響如同其對一階相變態者,這顯示在二階相變態中這二個相變態間之相互影響並不大。 | zh_TW |
dc.description.abstract | There are various multi-stage martensitic phase transformation sequences of TiNi-based shape memory alloys, including B2⟷B19', B2⟷R phase, B2⟷B19, B2⟷R phase⟷B19', and B2⟷B19⟷B19'. First, we analyze the second-order phase transformations of Ti50Ni40Cu9Co1 and Ti50Ni40Cu8Co2, specifically B2⟷R phase ⟷ B19' or B2⟷B19⟷B19'. The results show that when the Co content is only 1at.%, Ti50Ni40Cu9Co1 undergoes the B2⟷B19⟷B19' second-order phase transformation sequence as well as Ti50Ni40Cu10. Besides, the addition of Co significantly lowers the transformation temperature of the martensitic phase transformation. On the other hand, when the Co content reaches 2at.%, the influence of Co on the transformation sequence in Ti50Ni40Cu8Co2 becomes more significant than that of Cu. As a result, Ti50Ni40Cu8Co2 exhibits the same B2⟷R phase⟷B19' second-order phase transformation sequence as Ti50Ni48Co2.
Furthermore, this study investigates the influence of 50 thermal cyclings on the transformation temperatures of Ti50Ni50 (homogenized at 900℃), ternary alloys Ti50Ni50-xDx (D=Fe, Pd, Cu), and quaternary alloys Ti50Ni40Cu9Co1 and Ti50Ni40Cu8Co2. During the thermal cycling process, irreversible dislocation accumulations occur, resulting in a continuous decrease in the transformation temperatures. The underlying reasons for this phenomenon are related to factors such as the yield strength of the shape memory alloy and the shear strain values (s) generated during the transformation process, which vary with different transformation sequences. The experimental results reveal that the extent of temperature reduction for different transformation sequences during thermal cycling follows the same order as the shear strain values (s): B2⟷B19' > B2⟷B19 > B2⟷R. Additionally, the influence of thermal cycling on second-order phase transformations is similar to that observed in first-order phase transformations, indicating that there is not much mutual influence between these two phase transformations in second-order transformations. | en |
dc.description.provenance | Submitted by admin ntu (admin@lib.ntu.edu.tw) on 2023-08-15T16:59:19Z No. of bitstreams: 0 | en |
dc.description.provenance | Made available in DSpace on 2023-08-15T16:59:19Z (GMT). No. of bitstreams: 0 | en |
dc.description.tableofcontents | 摘要 i
Abstract iii 目錄 v 第一章 前言 1 第二章 文獻回顧 3 2.1 形狀記憶合金(SMAs)之簡介 3 2.1.1 熱彈型麻田散體相變態 4 2.1.2形狀記憶效應(Shape Memory Effect,SME) 6 2.1.3超彈性/擬彈性(Pseudoelasticity,PE) 7 2.2 TiNi形狀記憶合金 8 2.2.1 TiNi基形狀記憶合金之相變態 9 2.2.2 B2→R→B19’二階相變態 9 2.2.3 B2→B19→B19’二階相變態 10 2.3富鎳TiNi形狀記憶合金 11 2.4形狀記憶合金中之功能性疲勞(Functional Fatigue) 12 2.4.1功能性疲勞(FF)產生之機制 13 2.4.2功能性疲勞(FF)之防治 14 2.5熱循環(Thermal Cycling)對形狀記憶合金之影響 16 第三章 實驗步驟 39 3.1 試片製備 39 3.2 示差掃描熱分析儀(DSC)實驗 40 3.3 X光繞射儀(X-ray Diffractometer)晶體結構分析 41 3.4 微硬度(Microvickers)量測 42 第四章 Ti50Ni40Cu10-xCox之相變態順序分析 49 4.1 Ti50Ni40Cu9Co1之XRD實驗結果 49 4.2 Ti50Ni40Cu8Co2之XRD實驗結果 50 4.3本章之結語 51 第五章 熱循環對鈦鎳基形狀記憶合金變態溫度之影響 57 5.1 熱循環對不同鈦鎳基形狀記憶合金之影響 57 5.1.1 熱循環對Ti50Ni50 形狀記憶合金的影響 57 5.1.2熱循環對Ti50Ni46Fe4 形狀記憶合金的影響 58 5.1.3熱循環對Ti50Ni37Pd13 形狀記憶合金的影響 58 5.1.4熱循環對Ti50Ni30Cu20 形狀記憶合金的影響 59 5.1.5 熱循環對Ti50Ni48Fe2 形狀記憶合金的影響 59 5.1.6熱循環對Ti50Ni40Cu10 形狀記憶合金的影響 60 5.1.7熱循環對Ti50Ni40Cu9Co1形狀記憶合金的影響 61 5.1.8熱循環對Ti50Ni40Cu8Co2 形狀記憶合金的影響 62 5.2 形狀記憶合金變態剪應變(s)與熱循環誘發差排之關係 62 5.3 形狀記憶合金降伏強度與熱循環誘發差排之關係 63 5.4熱循環對不同順序麻田散體相變態之影響 64 5.4.1熱循環對B2→B19’一階麻田散體相變態之影響 64 5.4.2熱循環對B2→R一階麻田散體相變態之影響 65 5.4.3熱循環對B2→B19一階麻田散體相變態之影響 65 5.4.4熱循環對B2→B19→B19’二階麻田散體相變態之影響 66 5.4.5熱循環對B2→R→B19’二階麻田散體相變態之影響 67 5.5本章之結語 68 第六章 結論 97 參考文獻 99 | - |
dc.language.iso | zh_TW | - |
dc.title | 熱循環對不同順序多階麻田散體相變態影響之研究 | zh_TW |
dc.title | Effects of Thermal Cycling on Different Sequences of Multi-stage Martensitic Transformation | en |
dc.type | Thesis | - |
dc.date.schoolyear | 111-2 | - |
dc.description.degree | 碩士 | - |
dc.contributor.oralexamcommittee | 張世航;周棟勝;吳錫侃 | zh_TW |
dc.contributor.oralexamcommittee | Shih-Hang Chang;Tung-Sheng Chou;Shyi-Kaan Wu | en |
dc.subject.keyword | 形狀記憶合金,多階相變態,熱循環,變態溫度,降伏強度,剪應變 s, | zh_TW |
dc.subject.keyword | Shape memory alloy,Multi-stage transformation,Thermal cycling,Transformation temperature,Yield strength,Shear strain (s), | en |
dc.relation.page | 104 | - |
dc.identifier.doi | 10.6342/NTU202302297 | - |
dc.rights.note | 未授權 | - |
dc.date.accepted | 2023-08-07 | - |
dc.contributor.author-college | 工學院 | - |
dc.contributor.author-dept | 材料科學與工程學系 | - |
顯示於系所單位: | 材料科學與工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-111-2.pdf 目前未授權公開取用 | 9.15 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。