Please use this identifier to cite or link to this item:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/83629
Title: | 診斷雙重故障掃描鏈透過錯誤位元分離 Diagnosing Double Faulty Chains through Failing Bit Separation |
Authors: | 郭承賢 Cheng-Sian Kuo |
Advisor: | 李建模 Chien-Mo Li |
Keyword: | 掃描鏈診斷,掃描壓縮,系統性缺陷, scan chain diagnosis,scan compression,systematic defect, |
Publication Year : | 2022 |
Degree: | 碩士 |
Abstract: | 掃描鏈診斷在提升產品良率的過程中扮演關鍵的腳色。現今電路設計中使用的高掃描鏈壓縮比增加了掃描鏈診斷的挑戰。擁有多重故障掃描鏈出現在同一個壓縮器底下已經成為現實。在同一個壓縮器底下,我們觀察到擁有兩條故障掃描鏈的機率大於擁有兩條以上的故障掃描鏈機率。在我們檢查的44個設計中,前一種情況的平均故障晶片百分比為8.76%, 而後一種情況的平均百分比為13.99%。這帶來了研究為同一台壓縮機提供雙重故障掃描鏈解決方案的急迫性。我們提出了一種技術來幫助解決這個問題,分離鏈故障效應的疊加以診斷具有雙重故障掃描鏈的晶片。此技術首先使用跳躍模擬來識別和分類僅歸因於一個故障鏈的故障。接著我們使用商業工具分別診斷已被分類到每個鏈的故障。為了證明我們技術的有效性,我們在模擬和真實測試數據上進行了實驗,所提出的方法顯示在解析度(2.38個候選者)和準確度(92.0%)方面相較使用商業工具的標準診斷有所改進。我們確實在生產測試中發現了10個故障晶片,它們可能在相同的雙重掃描鏈中存在系統性問題。 Diagnosing scan chain faults plays a key role in ramping up production yield. High scan chain compression ratios of modern designs increase the challenge of scan chain diagnosis. Having multiple faulty chains feeding the same compressor becomes a reality. Under the same compressor, we observe that the probability of having two faulty chains is higher than that of having more than two faulty chains. Among 44 designs we examined, the average percentage of failing devices for the former is 8.76%, while for the latter is 13.99%. This brings the urgency of investigating a solution for double faulty chains feeding the same compressor. We propose a technique to help address this problem, separating the superposition of chain fault effects to diagnose chips with two faulty scan chains. This technique first uses jump simulation to identify and classify failures that are attributable to only one of the faulty chains. Then we use commercial tools to diagnose the classified failures of each chain individually. To demonstrate the efficacy of our technique, experiments are conducted on both simulated and silicon test data, and the proposed method showed improvements over standard diagnosis with commercial tools in resolution (2.38 candidates) and accuracy (92.0%). We did find ten failing chips that potentially have a systematic problem in the same double chains in the production test. |
URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/83629 |
DOI: | 10.6342/NTU202202574 |
Fulltext Rights: | 未授權 |
Appears in Collections: | 電子工程學研究所 |
Files in This Item:
File | Size | Format | |
---|---|---|---|
ntu-110-2.pdf Restricted Access | 1.38 MB | Adobe PDF |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.