請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/7988
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 楊哲人 | |
dc.contributor.author | Ya-Ling Chang | en |
dc.contributor.author | 張雅齡 | zh_TW |
dc.date.accessioned | 2021-05-19T18:01:38Z | - |
dc.date.available | 2025-12-31 | |
dc.date.available | 2021-05-19T18:01:38Z | - |
dc.date.copyright | 2015-08-10 | |
dc.date.issued | 2015 | |
dc.date.submitted | 2015-08-10 | |
dc.identifier.citation | References
1. ASM Handbook Volume 9: Metallography and Microstructures, ed. G. F. V. Voort, 2004, ASM International. pp. 165-178. 2. G. Krauss, Principles of Heat Treatment of Steel, 1980, American Society for Metals. pp. 43-77. 3. K. Shimizu and T. Kakeshita, Isij International, 1989. 29(2): pp. 97-116. 4. A. R. Marder and G. Krauss, Asm Transactions Quarterly, 1967. 60(4): pp. 651-660. 5. K. W. Andrews, Journal of the Iron and Steel Institute, 1965. 203: pp. 721-727. 6. T. N. Durlu, Journal of Materials Science Letters, 1992. 11(10): pp. 702-705. 7. T. N. Durlu, Journal of Materials Science, 1999. 34(12): pp. 2887-2890. 8. V. Shrinivas, S. K. Varma, and L. E. Murr, Metallurgical and Materials Transactions A, 1995. 26(3): pp. 661-671. 9. T. Kakeshita, J. Katsuyama, T. Fukuda and T. Saburi, Materials Science and Engineering A, 2001. 312(1-2): pp. 219-226. 10. S. Kajiwara, Materials Transactions Jim, 1992. 33(11): p. 1027-1034. 11. Z. Nishiyama, Transformation Temperature and Rate of Martensite Formation, in Martensitic Transformation, ed. M. E. Fine, M. Meshii, et al., 1978, Academic Press. pp. 211-262. 12. M. Guener, E. Gueler, and H. Aktas, Materials Characterization, 2008. 59(4): pp. 498-502. 13. Z. Nishiyama, Crystallography of Martensite (General), in Martensitic Transformation, ed. M. E. Fine, M. Meshii, et al., 1978, Academic Press. pp. 14-134. 14. H. Kitahara, R. Ueji, M. Ueda, et al., Materials Characterization, 2005. 54(4-5): pp. 378-386. 15. H. Sato and S. Zaefferer, Acta Materialia, 2009. 57(6): pp. 1931-1937. 16. M. Umemoto, E. Yoshitake, and I. Tamura, Journal of Materials Science, 1983. 18(10): pp. 2893-2904. 17. T. Maki. Microstructure and mechanical behaviour of ferrous martensite. in Materials Science Forum. 1991. Trans Tech Publ. 18. M. Umemoto, T. Hyodo, T. Maeda and I. Tamura, Acta Metallurgica, 1984. 32(8): pp. 1191-1203. 19. X. M. Zhang, E. Gautier, and A. Simon, Acta Metallurgica, 1989. 37(2): pp. 477-485. 20. X. M. Zhang, E. Gautier, and A. Simon, Acta Metallurgica, 1989. 37(2): pp. 487-497. 21. A. Shibata, S. Morito, T. Furuhara, et al., Scripta Materialia, 2005. 53(5): pp. 597-602. 22. Z. Nishiyama and K. Shimizu, Acta Metallurgica, 1961. 9(10): pp. 980-981. 23. H. Sato, S. Zaefferer, and Y. Watanabe, Isij International, 2009. 49(11): pp. 1784-1791. 24. B. C. Muddle and J. F. Nie, Martensite, in Encyclopedia of Materials: Science and Technology (Second Edition), ed. K. H. J. Buschow, R. W. Cahn, et al., 2001, Elsevier. pp. 5189-5193. 25. H. K. D. H. Bhadeshia, Martensitic Transformation, in Encyclopedia of Materials: Science and Technology (Second Edition), ed. K. H. J. Buschow, R. W. Cahn, et al., 2001, Elsevier. pp. 5203-5206. 26. H. K. D. H. Bhadeshia, Worked examples in the Geometry of Crystals. second ed, 2006, Institute of Materials. 27. C. M. Wayman, Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science, 1994. 25(9): pp. 1787-1795. 28. H. K. D. H. Bhadeshia and R. W. K. Honeycombe, Formation of martensite, in Steels : microstructure and properties, 2006, Elsevier, Butterworth-Heinemann. 29. A. Stormvinter, P. Hedström, and A. Borgenstam, Solid State Phenomena, 2011. 172-174: pp. 61-66. 30. K. Shimizu, C. M. Wayman, O. Johari, et al., Acta Metallurgica, 1966. 14(10): pp. 1390-1391. 31. S. Morito, H. Tanaka, R. Konishi, et al., Acta Materialia, 2003. 51(6): pp. 1789-1799. 32. H. Kitahara, R. Ueji, N. Tsuji, et al., Acta Materialia, 2006. 54(5): pp. 1279-1288. 33. B. P. J. Sandvik and C. M. Wayman, Metallurgical Transactions A, 1983. 14(5): pp. 809-822. 34. S. Morito, X. Huang, T. Furuhara, et al., Acta Materialia, 2006. 54(19): pp. 5323-5331. 35. P. M. Kelly and J. Nutting, Journal of the Iron and Steel Institute, 1961. 197: pp. 199. 36. O. Johari and G. Thomas, Acta Metallurgica, 1964. 12(10): pp. 1153-1159. 37. O. Johari and G. Thomas, Acta Metallurgica, 1965. 13(11): pp. 1211-1212. 38. T. Maki, S. Shimooka, S. Fujiwara and I. Tamura, Transactions of the Japan Institute of Metals, 1975. 16(1): pp. 35-41. 39. D. P. Dunne and C. M. Wayman, Metallurgical Transactions, 1973. 4(1): pp. 147-152. 40. T. Maki, S. Shimooka, T. Arimoto, et al., Transactions of the Japan Institute of Metals, 1973. 14(1): pp. 62-67. 41. K. Shimizu, M. Oka, and C. M. Wayman, Acta Metallurgica, 1970. 18(9): pp. 1005-1011. 42. E. O. Fearon and M. Bevis, Acta Metallurgica, 1974. 22(8): pp. 991-1002. 43. K. A. Taylor, G. B. Olson, M. Cohen, et al., Metallurgical Transactions A, 1989. 20(12): pp. 2739-2747. 44. A. Stormvinter, P. Hedstrom, and A. Borgenstam, Journal of Materials Science & Technology, 2013. 29(4): pp. 373-379. 45. P. C. Rowlands, E. O. Fearon, and M. Bevis, Journal of Materials Science, 1970. 5(9): pp. 769-776. 46. H. J. Neuhause and W. Pitsch, Acta Metallurgica, 1971. 19(4): pp. 337-344. 47. T. Kakeshita, K. Shimizu, T. Maki, et al., Scripta Metallurgica, 1980. 14(10): pp. 1067-1070. 48. A. Shibata, T. Murakami, S. Morito, et al., Materials Transactions, 2008. 49(6): pp. 1242-1248. 49. R. L. Patterson and C. M. Wayman, Acta Metallurgica, 1964. 12(11): pp. 1306-1311. 50. T. Maki and C. M. Wayman, Acta Metallurgica, 1977. 25(6): pp. 695-710. 51. K. Shimizu, M. Oka, and C. M. Wayman, Acta Metallurgica, 1971. 19(1): pp. 1-6. 52. M. Dechamps and L. M. Brown, Acta Metallurgica, 1979. 27(7): pp. 1281-1291. 53. T. Maki and C. M. Wayman, Acta Metallurgica, 1977. 25(6): pp. 681-693. 54. M. A. Meyers, Acta Metallurgica, 1980. 28(6): pp. 757-770. 55. H.-Y. Lee, H.-W. Yen, H.-T. Chang, et al., Scripta Materialia, 2010. 62(9): pp. 670-673. 56. R. L. Patterso and C. M. Wayman, Acta Metallurgica, 1966. 14(3): pp. 347-369. 57. M. Umemoto, K. Minoda, and I. Tamura, Metallography, 1982. 15(2): pp. 177-191. 58. T. Maki, S. Shimooka, M. Umemoto, et al., Transactions of the Japan Institute of Metals, 1972. 13(6): pp. 400-407. 59. R. P. Reed, Acta Metallurgica, 1967. 15(8): pp. 1287-1296. 60. E. Guler, T. Kirindi, and H. Aktas, Journal of Alloys and Compounds, 2007. 440(1-2): pp. 168-172. 61. A. Shibata, H. Yonezawa, K. Yabuuchi, et al., Materials Science and Engineering A, 2006. 438: pp. 241-245. 62. A. Shibata, S. Morito, T. Furuhara, et al., Acta Materialia, 2009. 57(2): pp. 483-492. 63. A. Shibata, T. Furuhara, and T. Maki, Acta Materialia, 2010. 58(9): pp. 3477-3492. 64. G. Miyamoto, A. Shibata, T. Maki, et al., Acta Materialia, 2009. 57(4): pp. 1120-1131. 65. A. Shibata, H. Jafarian, and N. Tsuji, Materials Transactions, 2012. 53(1): pp. 81-86. 66. L. Zhang, T. Ohmura, A. Shibata, et al., Materials Science and Engineering A, 2010. 527(7-8): pp. 1869-1874. 67. X. M. Zhang, X. Zhao, J. X. Zhong, et al., Scripta Metallurgica Et Materialia, 1990. 24(10): pp. 1953-1958. 68. H. K. D. H. Bhadeshia, Bainite in steels : transformations, microstructure and properties, 2001, IOM Communications. pp. 42-44. 69. H. K. D. H. Bhadeshia, Journal of Materials Science, 1982. 17(2): pp. 383-386. 70. C. L. Magee, Phase Transformations, ASM Seminar. p. 115. 71. J. C. Bokros and E. R. Parker, Acta Metallurgica, 1963. 11(12): pp. 1291-1301. 72. R. M. Brito, R. B. C. Dasilva, and Guimarae.Jr, Scripta Metallurgica, 1974. 8(5): pp. 527-532. 73. D. R. Wollmann and Guimarae.Jr, Scripta Metallurgica, 1973. 7(4): pp. 355-359. 74. P. R. Rios and J. R. Costa Guimaraes, Materials Research-Ibero-American Journal of Materials, 2010. 13(1): pp. 119-124. 75. H. Okamoto, M. Oka, and I. Tamura, Transactions of the Japan Institute of Metals, 1978. 19(12): pp. 674-684. 76. M. Umemoto and C. M. Wayman, Acta Metallurgica, 1978. 26(10): pp. 1529-1549. 77. Y. Liu and J. Pietikainen, Scripta Metallurgica Et Materialia, 1992. 27(7): pp. 887-892. 78. M. G. H. Wells, Acta Metallurgica, 1964. 12(4): pp. 389-399. 79. G. R. Speich and W. C. Leslie, Metallurgical Transactions, 1972. 3(5): pp. 1043-1054. 80. F. H. Samuel and A. A. Hussein, Materials Science and Engineering, 1983. 58(1): pp. 113-120. 81. F. H. Samuel and A. A. Hussein, Metallography, 1982. 15(4): pp. 391-408. 82. R. N. Caron and G. Krauss, Metallurgical Transactions, 1972. 3(9): pp. 2381-2389. 83. A. J. Clarke, M. K. Miller, R. D. Field, et al., Acta Materialia, 2014. 77: p. 17-27. 84. Y. Ohmori and S. Sugisawa, Transactions of the Japan Institute of Metals, 1971. 12(3): pp. 170-178. 85. R. W. K. Honeycombe, Structure and strength of alloy steels, 1975, Climax Molybdenum Co. Ltd. pp. 7-10. 86. A. K. Seal and R. W. K. Honeycombe, J. of the Iron and Steel Institute, 1958. 188: pp. 343-350. 87. M. Tanino and K. Aoki, Transactions of the Iron and Steel Institute of Japan, 1968. 8(5): pp. 337. 88. D. H. Jack and K. H. Jack, Materials Science and Engineering, 1973. 11(1): pp. 1-27. 89. C. B. Ma, T. Ando, D. L. Williamson, et al., Metallurgical Transactions A, 1983. 14(6): pp. 1033-1045. 90. S. Nagakura, T. Suzuki, and M. Kusunoki, Transactions of the Japan Institute of Metals, 1981. 22(10): pp. 699-709. 91. P. V. Morra, A. J. Bottger, and E. J. Mittemeijer, Journal of Thermal Analysis and Calorimetry, 2001. 64(3): pp. 905-914. 92. C. Zhu, X. Y. Xiong, A. Cerezo, et al., Ultramicroscopy, 2007. 107(9): pp. 808-812. 93. G. E. Totten and M. A. H. Howes, Steel Heat Treatment Handbook. Second Edition ed, 2006, CRC Press. pp. 1-45. 94. C. Zhu, A. Cerezo, and G. D. W. Smith, Ultramicroscopy, 2009. 109(5): pp. 545-552. 95. S. J. Barnard, G. D. W. Smith, M. Sarikaya, et al., Scripta Metallurgica, 1981. 15(4): pp. 387-392. 96. Y. Ohmori and I. Tamura, Metallurgical Transactions a-Physical Metallurgy and Materials Science, 1992. 23(8): pp. 2147-2158. 97. G. V. Kurdjumo and A. G. Khachatu, Metallurgical Transactions, 1972. 3(5): pp. 1069. 98. S. Nagakura, Y. Hirotsu, M. Kusunoki, et al., Metallurgical Transactions a, 1983. 14(6): pp. 1025-1031. 99. M. J. VanGenderen, M. Isac, A. Bottger, et al., Metallurgical and Materials Transactions A, 1997. 28(3): pp. 545-561. 100. C. A. Wert, Physical Review, 1950. 79(4): pp. 601-605. 101. P. Schaaf, A. Kramer, S. Wiesen, et al., Acta Metallurgica Et Materialia, 1994. 42(9): pp. 3077-3081. 102. H. L. Yakel, International Metals Reviews, 1985. 30(1): pp. 17-44. 103. D. H. Jack, Materials Science and Engineering, 1974. 13(1): pp. 19-27. 104. C. J. Barton, Acta Metallurgica, 1969. 17(8): pp. 1085-1093. 105. Y. Hirotsu and S. Nagakura, Acta Metallurgica, 1972. 20(4): pp. 645-655. 106. Y. Ohmori, Transactions of the Japan Institute of Metals, 1972. 13(2): pp. 119-127. 107. E. J. Fasiska and G. A. Jeffrey, Acta Crystallographica, 1965. 19: pp. 463. 108. K. W. Andrews, Acta Metallurgica, 1963. 11(8): p.p 939-946. 109. I. V. Isaichev, Zhurnal Tekhnicheskoi Fiziki, 1947. 17(7): pp. 835-838. 110. Y. A. Bagaryatskii, Doklady Akademii Nauk SSSR, 1950. 73: pp. 1161-1164. 111. N. J. Petch, Acta Crystallographica, 1953. 6(1): pp. 96-96. 112. M. X. Zhang and P. M. Kelly, Acta Materialia, 1998. 46(11): pp. 4081-4091. 113. M. X. Zhang and P. M. Kelly, Scripta Materialia, 1997. 37(12): pp. 2009-2015. 114. A. Czarski, T. Skowronek, and W. Osuch, Metallurgy and Foundry Engineering, 2007. 33(1): pp. 41-49. 115. D. V. Shtansky, K. Nakai, and Y. Ohmori, Philosophical Magazine A, 1999. 79(7): pp. 1655-1669. 116. Y. Ohmori, Isij International, 2001. 41(6): pp. 554-565. 117. D. S. Zhou and G. J. Shiflet, Metallurgical Transactions A, 1992. 23(4): pp. 1259-1269. 118. Y. Ohmori, R. W. K. Honeycombe, and A. T. Davenpor, Transactions of the Iron and Steel Institute of Japan, 1972. 12(2): pp. 112-117. 119. V. Krasevec, M. Macek, and J. Rodic, Acta Metallurgica, 1980. 28(2): pp. 223-229. 120. I. Tkalcec, C. Azcoitia, S. Crevoiserat, et al., Materials Science and Engineering A, 2004. 387: pp. 352-356. 121. D. J. Dyson and K. W. Andrews, Journal of the Iron and Steel Institute, 1969. 207: pp. 208-217. 122. J. P. Morniroli, E. Bauergrosse, and M. Gantois, Philosophical Magazine A, 1983. 48(3): pp. 311-327. 123. E. Bauergrosse, J. P. Morniroli, C. Frantz, et al., Journal De Physique, 1982. 43(NC-9): pp. 285-288. 124. M. Palcut, M. Vach, R. Cicka, et al., Archives of Metallurgy and Materials, 2008. 53(4): pp. 1157-1164. 125. K. H. Kuo and C. L. Jia, Acta Metallurgica, 1985. 33(6): p. 991-996. 126. P. R. Howell, J. V. Bee, and R. W. K. Honeycombe, Metallurgical Transactions A, 1979. 10(9): pp. 1213-1222. 127. R. C. Thomson, Materials Characterization, 2000. 44(1-2): pp. 219-233. 128. D. Raynor, J. A. Whiteman, and R. W. K. Honeycom, Journal of the Iron and Steel Institute, 1966. 204: pp. 1114-1116. 129. A. Inoue, S. Arakawa, and T. Masumoto, Transactions of the Japan Institute of Metals, 1978. 19(1): pp. 11-17. 130. A. Inoue and T. Masumoto, Metallurgical Transactions A, 1980. 11(5): pp. 739-747. 131. A. Inoue and T. Masumoto, Journal of the Japan Institute of Metals, 1978. 42(8): pp. 787-795. 132. D. Raynor, J. A. Whiteman, and R. W. K. Honeycom, Journal of the Iron and Steel Institute, 1966. 204: p. 349-354. 133. H. K. D. H. Bhadeshia and R. W. K. Honeycombe, Steels : microstructure and properties, 2006, Elsevier, Butterworth-Heinemann. pp. 183-208. 134. D. W. Hetzner and W. Van Geertruyden, Materials Characterization, 2008. 59(7): pp. 825-841. 135. B. Miao, D. O. Northwood, L. C. Lim, et al., Materials Science and Engineering A, 1993. 171(1-2): pp. 21-33. 136. H. O. Andren, Scripta Metallurgica, 1981. 15(7): pp. 749-752. 137. T. Masumoto, S. Takeda, and Y. Imai, Science Reports of the Research Institutes Tohoku University Series a-Physics Chemistry and Metallurgy, 1970. 22(1): pp. 34. 138. M. S. Bhat, W. M. Garrison, and V. F. Zackay, Materials Science and Engineering, 1979. 41(1): pp. 1-15. 139. C. R. Simcoe and Nehrenbe.Ae, Asm Transactions Quarterly, 1965. 58(3): pp. 378. 140. B. R. Banerjee, Journal of the Iron and Steel Institute, 1965. 203: pp. 166-174. 141. G. Krauss, Steels: Heat Treatment and Processing Principles, 1990, ASM International. pp. 205-261. 142. J. A. Peters, J. V. Bee, B. Kolk, et al., Acta Metallurgica, 1989. 37(2): pp. 675-686. 143. R. M. Horn and R. O. Ritchie, Metallurgical Transactions A, 1978. 9(8): pp. 1039-1053. 144. G. Krauss, Martensite before and after Tempering, Deformation and Fracture of, in Encyclopedia of Materials: Science and Technology (Second Edition), ed. K. H. J. Buschow, R. W. Cahn, et al., 2001, Elsevier. pp. 5193-5197. 145. M. Yaso, S. Hayashi, S. Morito, et al., Materials Transactions, 2009. 50(2): pp. 275-279. 146. M. Yaso, S. Morito, T. Ohba, et al., Materials Science and Engineering A, 2008. 481: pp. 770-773. 147. A. Stormvinter, A. Borgenstam, and J. Agren, Metallurgical and Materials Transactions A, 2012. 43A(10): pp. 3870-3879. 148. E. Bauergrosse, J. P. Morniroli, M. Khachfi, et al., Journal of the Less-Common Metals, 1986. 117(1-2): pp. 231-236. 149. W. Dudzinski, J. P. Morniroli, and M. Gantois, Journal of Materials Science, 1980. 15(6): pp. 1387-1401. 150. J. T. H. Pearce, Journal of Materials Science Letters, 1983. 2(8): pp. 428-432. 151. S. D. Carpenter, D. E. O. S. Carpenter, and J. T. H. Pearce, Journal of Alloys and Compounds, 2010. 494(1-2): pp. 245-251. 152. D. V. Shtansky, K. Nakai, and Y. Ohmori, Acta Materialia, 1999. 47(4): pp. 1105-1115. 153. E. S. Machlin and M. Cohen, Journal of Metals, 1951. 3(11): pp. 1019-1029. 154. G. Ghosh, C. E. Campbell, and G. B. Olson, Metallurgical and Materials Transactions A, 1999. 30(3): pp. 501-512. 155. G. Ghosh and G. B. Olson, Acta Materialia, 2002. 50(8): pp. 2099-2119. 156. S. S. Babu, K. Hono, and T. Sakurai, Metallurgical and Materials Transactions A, 1994. 25(3): pp. 499-508. 157. J. R. Yang, T. H. Yu, and C. H. Wang, Materials Science and Engineering A, 2006. 438: pp. 276-280. 158. C. Servant and G. Cizeron, Materials Science and Engineering A, 1989. 117: pp. 175-189. 159. I. Tamura, H. Yoshimura, M. Ibaraki, et al., Transactions of the Japan Institute of Metals, 1964. 5(2): pp. 97-99. 160. J. W. Stewart, R. C. Thomson, and H. Bhadeshia, Journal of Materials Science, 1994. 29(23): pp. 6079-6084. 161. R. C. Thomson and M. K. Miller, Applied Surface Science, 1995. 87-8(1-4): pp. 185-193. 162. S. S. Babu, K. Hono, and T. Sakurai, Applied Surface Science, 1993. 67(1-4): pp. 321-327. 163. R. C. Thomson and M. K. Miller, Applied Surface Science, 1996. 94-5: pp. 313-319. 164. R. C. Thomson and H. Bhadeshia, Applied Surface Science, 1993. 67(1-4): pp. 334-341. 165. R. C. Thomson and M. K. Miller, Acta Materialia, 1998. 46(6): pp. 2203-2213. 166. A. Matsuzaki, H. K. D. H. Bhadeshia, and H. Harada, Tempering of Martensite Under the Influence of an Externally Applied Stress, in G. R. Speich symposium, 1992, Iron and Steel Society AIME. pp. 47-52. 167. L. C. Chang and H. Bhadeshia, Journal of Materials Science, 1996. 31(8): pp. 2145-2148. 168. D. V. Shtansky, K. Nakai, and Y. Ohmori, Acta Materialia, 2000. 48(4): pp. 969-983. 169. D. P. Field, Ultramicroscopy, 1997. 67(1-4): pp. 1-9. 170. H. O. Martikainen, M. A. Korhonen, and V. K. Lindroos, Physica Status Solidi a-Applied Research, 1983. 75(2): pp. 559-566. 171. S. Zaefferer, Ultramicroscopy, 2007. 107(2-3): pp. 254-266. 172. K. Z. Baba-Kishi, Journal of Materials Science, 2002. 37(9): pp. 1715-1746. 173. D. Williams and C. B. Carter, Kikuchi Diffraction, in Transmission Electron Microscopy, 2009, Springer US. pp. 311-322. 174. D. G. Coates, Philosophical Magazine, 1967. 16(144): pp. 1179-1185. 175. A. F. Gourgues, H. M. Flower, and T. C. Lindley, Materials Science and Technology, 2000. 16(1): pp. 26-40. 176. M. R. Barnett, A. Ghaderi, J. Quinta da Fonseca, et al., Acta Materialia, 2014. 80(0): pp. 380-391. 177. F. Ernst, M. L. Mulvihill, O. Kienzle, et al., Journal of the American Ceramic Society, 2001. 84(8): pp. 1885-1890. 178. A. Koblischka-Veneva and F. Mucklich, Crystal Engineering, 2002. 5(3-4): pp. 235-242. 179. J. Hou, Z. Zhang, W. Preis, et al., Journal of the European Ceramic Society, 2011. 31(5): pp. 763-771. 180. M. Bestmann and D. J. Prior, Journal of Structural Geology, 2003. 25(10): pp. 1597-1613. 181. D. J. Prior, E. Mariani, and J. Wheeler, EBSD in the Earth Sciences: Applications, Common Practice, and Challenges, in Electron Backscatter Diffraction in Materials Science, ed. A. J. Schwartz, M. Kumar, et al., 2009, Springer US. pp. 345-360. 182. S. X. Ren, E. A. Kenik, K. B. Alexander, et al., Microscopy and Microanalysis, 1998. 4(1): pp. 15-22. 183. D. Chen, J.-C. Kuo, and W.-T. Wu, Ultramicroscopy, 2011. 111(9-10): pp. 1488-1494. 184. D. R. Steinmetz and S. Zaefferer, Materials Science and Technology, 2010. 26(6): pp. 640-645. 185. F. J. Humphreys, Journal of Microscopy-Oxford, 1999. 195: pp. 170-185. 186. F. J. Humphreys, Journal of Materials Science, 2001. 36(16): pp. 3833-3854. 187. F. J. Humphreys, Scripta Materialia, 2004. 51(8): pp. 771-776. 188. D. Dingley, Journal of Microscopy-Oxford, 2004. 213: pp. 214-224. 189. F. J. Humphreys, Y. Huang, I. Brough, et al., Journal of Microscopy-Oxford, 1999. 195: pp. 212-216. 190. Y. Chen, J. Hjelen, S. S. Gireesh, et al., Journal of Microscopy, 2012. 245(2): pp. 111-118. 191. F. J. Humphreys, P. S. Bate, and P. J. Hurley, Journal of Microscopy-Oxford, 2001. 201: pp. 50-58. 192. A. W. Wilson and G. Spanos, Materials Characterization, 2001. 46(5): pp. 407-418. 193. M. X. Zhang and P. M. Kelly, Materials Characterization, 1998. 40(3): pp. 159-168. 194. S. Zaefferer, Crystal Research and Technology, 2011. 46(6): pp. 607-628. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/7988 | - |
dc.description.abstract | 本研究是以AISI 440C中生成的透鏡狀麻田散鐵為研究對象,首先試著控制均質化溫度,使碳化物融入基地中,探討基地中合金元素的含量對Ms溫度與麻田散鐵形貌的影響。透鏡狀麻田散鐵分別在沃斯田鐵晶界與未完全固溶的M7C3邊界優先成核,透鏡狀麻田散鐵的生長過程是先生成板片狀麻田散鐵再轉變成透鏡狀麻田散鐵,因此造成透鏡狀麻田散鐵含有三個區域;含有兩種缺陷-雙晶與差排,利用穿透式電子顯微鏡(TEM)與背向散射電子繞射分析(EBSD)微觀觀察其三個區域與misorientation的變化,並觀察透鏡狀麻田散鐵的2-D形貌,發現雙晶具有彎曲現象,與藉著聚焦式離子束顯微鏡(FIB)觀察透鏡狀麻田散鐵的3-D形貌為橢圓體,巨觀觀察透鏡狀麻田散鐵間相互連結的樣貌有spear, kink 及 zigzag array三種,均與沃斯田鐵基地呈現Kurdjumov-Sachs(K-S)方位關係。
以400ºC回火熱處理的透鏡狀麻田散鐵微結構變化,在同一透鏡狀麻田散鐵晶粒內有兩種雪明碳鐵生成,一種是needle型,與肥粒鐵呈現Isaichev OR,只具有一個方向性,不會隨時間轉變成M7C3;另一種為rice型,與肥粒鐵呈現Bagaryatskii OR,先在中脊區(雙晶)與無雙晶區(差排)生成,隨著時間拉長cementite越來越多、越來越大,為降低表面能而聚集形成圓形,再聚集經由in-situ機制轉變為平行四邊形的M7C3,前述兩種雪明碳鐵的成核機制分別為剪切機制與擴散機制。 | zh_TW |
dc.description.abstract | This work mainly focuses on the investigation of the microstructure and transformation of lenticular martensite in AISI 440C stainless steel. The research can be divided into two parts. The goal of the first is to analyze the transformation and morphology of lenticular martensite; the goal of the second is to observe the evolution of carbide formation in lenticular martensite during tempering treatment.
In the first part, by controlling the homogenization temperature, an appropriate lenticular martensite structure was obtained, facilitating the following observation. The influences of the alloying element content on Ms temperature and the transformed martensite morphology were analyzed with electrical microscopy. Due to the high alloying element content of AISI 440C stainless steel, even after homogenization treatment, the M7C3 carbides are still distributed in the austenite matrix and therefore become the nucleation sites of lenticular martensite. During the martensite transformation process, the initial nucleation product is plate martensite, which then grows into a lenticular martensite structure. Lenticular martensite contains three regions: a midrib (which can be seen as the former plate martensite structure), a twinned region, and an untwinned region. These three regions differ not only in their morphologies but also in their misorientation distribution. Transmission election microscopy (TEM) and electron backscatter diffraction (EBSD) techniques were applied to explore the misorientation in these regions and the crystal orientation relationship between austenite and martensite. In our observations, a single lenticular martensite grain shows an elliptical morphology. Furthermore, a specimen polished with the focus ion beam (FIB) method provides 3-D images information and confirms that lenticular martensite is shaped like a thick shell. The crystallography of lenticular martensite formed in coarse austenite grains was investigated using electron backscattered diffraction (EBSD). Although the spread in diffracted intensity within pole figures was significant, due to the orientation gradient within lenticular martensite, the trend of pole figures indicated that the lenticular martensite approximately adopted a Kurdjumov-Sachs (K-S) orientation relationship with respect to the austenite matrix. The orientation relationships of variant pairings (zigzag, spear, and kink types) have been analyzed. The aim of the second part of this research is to discuss the effects of tempering treatment on lenticular martensite. After tempering at 400ºC, there exist two different kinds of cementite: the 'needle' type, which does not transform into M7C3 even after a long tempering treatment, and the 'rice' type, which first nucleates at twins in the midrib region and dislocations in the untwinned region, continues to grow during tempering treatment, and finally becomes a parallelogram-shaped M7C3 carbide. The discrepancies between the two types of cementites in shape and crystallographic relationship can be attributed to the nucleation and growing mechanisms. With electrical microscopy analysis, the displacive mechanism and diffusion mechanism are applied to elucidate the formation of cementites in lenticular martensite. | en |
dc.description.provenance | Made available in DSpace on 2021-05-19T18:01:38Z (GMT). No. of bitstreams: 1 ntu-104-D99527007-1.pdf: 13094378 bytes, checksum: bfcf95553f15d101dabb94543f184ecb (MD5) Previous issue date: 2015 | en |
dc.description.tableofcontents | Contents
誌謝 I Abstract III 中文摘要 VI Contents VII Figure content XI Table content XXVII Chapter 1 Introduction 1 Chapter 2 Literature Review 5 2.1 Introduction of martensite 5 2.1.1 Martensitic phase transformation 5 2.1.2 The orientation relationships of martensite transformation 7 2.1.3 The phenomenological theory of martensite crystallography 9 2.2 The microstructure of martensites 17 2.2.1 Lath martensites 18 2.2.2 Plate martensites 19 2.2.3 Lenticular martensites 21 2.3 The tempering of martensite 35 2.3.1 Introduction of tempered martensite 35 2.3.2 Tempering of Chromium-containing alloy steels 37 2.4 Carbides in martensitic steel and transformation of carbides 39 2.4.1 Categories of carbides 40 2.4.2 Transformation and mechanism 45 Chapter 3 Lenticular martensite in AISI 440C stainless steel 51 3.1 Introduction 51 3.2 Experimental procedure 52 3.3 Results and Discussion 55 3.3.1 The influence of different austenitization temperature 55 3.3.2 The transformation of lenticular martensite 67 3.3.3 The morphologies of lenticular martensite 75 3.4 Conclusions 80 Chapter 4 Crystallographic analysis of lenticular martensite by electron backscattered diffraction 81 4.1 Introduction 81 4.2 Experimental procedure 85 4.3 Results and Discussion 86 4.3.1 Crystallographic analysis of lenticular martensite 86 4.3.2 Coupling of lenticular martensite 95 4.4 Conclusions 112 Chapter 5 Tempered lenticular martensite in AISI 440C stainless steel by transmission election microscopy 114 5.1 Introduction 114 5.2 Experimental procedure 116 5.3 Results 118 5.3.1 Needle-like cementite carbides 119 5.3.2 Rice-like cementite carbides 130 5.3.3 M7C3 carbides 137 5.4 Discussion 144 5.4.1 Carbide precipitation 144 5.4.2 Diffusion mechanism for alloy carbide precipitation 146 5.5 Conclusion 149 Chapter 6 The misorientation change in lenticular martensite by Electron Backscattered Diffraction and Convergent Beam Kikuchi Line Diffraction Pattern 151 6.1 Introduction 151 6.2 Experimental Procedure 157 6.3 Results and Discussion 158 6.3.1 Convergent beam Kikuchi line diffraction patterns (CBKLDP) 158 6.3.2 Electron Backscatter Diffraction (EBSD) 160 6.4 Conclusions 167 Chapter 7 General conclusion 168 References 172 | |
dc.language.iso | en | |
dc.title | AISI 440C合金鋼透鏡狀麻田散鐵次微米結構分析 | zh_TW |
dc.title | The Analysis of Lenticular Martensite Submicron Structure in AISI 440C Alloying Steel | en |
dc.type | Thesis | |
dc.date.schoolyear | 103-2 | |
dc.description.degree | 博士 | |
dc.contributor.oralexamcommittee | 林新智,熊樂群,王星豪,王樂民,黃慶淵 | |
dc.subject.keyword | 透鏡狀麻田散鐵,聯結,回火熱處理,雪明碳鐵,成核機制, | zh_TW |
dc.subject.keyword | lenticular martensite,variant pair,tempering,cementite,nucleation mechanisms, | en |
dc.relation.page | 182 | |
dc.rights.note | 同意授權(全球公開) | |
dc.date.accepted | 2015-08-10 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 材料科學與工程學研究所 | zh_TW |
dc.date.embargo-lift | 2025-12-31 | - |
顯示於系所單位: | 材料科學與工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-104-1.pdf 此日期後於網路公開 2025-12-31 | 12.79 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。