請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/74303
標題: | 透過內插方法改善性質導向可達性技術 Property Directed Reachability with Interpolation Refinement |
作者: | Shih-Yu Chuang 莊世聿 |
指導教授: | 黃鐘揚(Chung-Yang Huang) |
關鍵字: | 正規驗證,模型檢查,可滿足性問題,性質導向可達性技術,基於內插法的模型檢查演算法, Formal Verification,Model Checking,Satisfiability Problem,Property Directed Reachability,Interpolation Based Model Checking, |
出版年 : | 2019 |
學位: | 碩士 |
摘要: | 自從2011年被提出以後,性質導向可達性演算法已經被公認為目前最佳的模型檢查引擎。然而目前還有許多案例為性質導向可達性演算法無法解決,因此改良性質導向可達性演算法一直都是個重要的問題。在這篇論文中,我們將性質導向可達性演算法與麥克米倫內插法結合使其可以跳過遞迴封鎖方塊階段所花費的巨量時間藉此改善效能。實驗結果顯示我們方法之效能在世界硬體模型檢查比賽中可以解決比性質導向可達性演算法與麥克米倫內插法更多的案例。 Property directed reachability / IC3 (PDR) has been recognized to be the most powerful model checking engine since it was proposed in 2011. However, there are still a lot of benchmarks which cannot be solved by PDR. The demand of improving PDR is quite urgent. In this thesis, we proposed a method combining PDR with McMillan's interpolant to help PDR skip the huge runtime during recursive blocking cube phase to improve the performance. The experimental result shows that our method can solve more cases than the original PDR and McMillan's interpolation-based model checker on HWMCC's benchmarks. |
URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/74303 |
DOI: | 10.6342/NTU201901860 |
全文授權: | 有償授權 |
顯示於系所單位: | 電機工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-108-1.pdf 目前未授權公開取用 | 2.53 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。