Skip navigation

DSpace

機構典藏 DSpace 系統致力於保存各式數位資料(如:文字、圖片、PDF)並使其易於取用。

點此認識 DSpace
DSpace logo
English
中文
  • 瀏覽論文
    • 校院系所
    • 出版年
    • 作者
    • 標題
    • 關鍵字
  • 搜尋 TDR
  • 授權 Q&A
    • 我的頁面
    • 接受 E-mail 通知
    • 編輯個人資料
  1. NTU Theses and Dissertations Repository
  2. 工學院
  3. 材料科學與工程學系
請用此 Handle URI 來引用此文件: http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/59740
標題: 含硫烷側鏈之聚3-己基噻吩:精準性合成、微結構及光電性質之研究
Poly(3-hexylthiothiophene) : precise synthesis, microstructure, and electro-optical properties
作者: Ning Chung
鍾寧
指導教授: 趙基揚(Chi-Yang Chao)
關鍵字: 含硫烷側鏈之聚3-己基?吩,2-溴-5-碘-3硫己基?吩,立體規則度,分子量控制,
Poly(3-alkylthiothiophenes),2-bromo-5-iodo-3-hexylthiothiophene,regioregularity,molecular weight control,
出版年 : 2017
學位: 碩士
摘要: Poly(3-alkylthiothiophenes) (P3ATTs)為三號位置上含有硫烷側鏈的噻吩共聚物。屬於推電子基團的硫烷側鏈能提升噻吩共聚物主鏈上的電子密度,再加上硫與硫之間的非共價吸引力能促使更好的pi-pi堆疊,進而增加載子遷移率。因此P3ATTs被視為有能力取代傳統電子產品常使用的poly(3-alkylthiophenes) (P3ATs)。然而,儘管P3ATTs 和P3ATs的結構非常相似,P3ATTs卻不能以相同的製程方式合成出完美立體規則度的共聚物。
在本篇論文中將合成出一個嶄新的化合物2-bromo-5-iodo-3-hexylthiothiophene作為GRIM聚合的單體。有別於前人的合成方法,我們可以在較為平易近人的條件下獲得高立體規則度,設計的分子量以及狹窄的分子量分布。我們將系統化的研究溫度及反應時間在聚合時對於分子量以及分子量分布的影響。研究指出溫度會嚴重影響聚合活性,因此為分子量控制的關鍵。
藉由精準地控制分子量,我們聚合出一系列的P3HTT進而探討立體規則度和分子量對於光學吸收、電子能帶結構以及超分子組織狀況的影響。
Poly(3-alkylthiothiophenes) (P3ATTs), polythiophenes having alkylthio side chains at 3-position of a thiophene repeating unit, are expected to offer the corresponding electronic devices better performance than the mostly studied poly(3-alkylthiophenes) (P3ATs), as the sulfur atom of the alkylthio side chain could donate the electron density to the polythiophene backbone and the S(thienyl)-S(alkylthio) interaction would enhance stacking to improve charge carrier mobilities. Despite the similarity in chemical structures of P3ATTs and P3ATs, the methodologies commonly adopted for precise syntheses of P3ATs could not successfully produce well-defined regioregular P3ATTs.
In this thesis, a new monomer 2-bromo-5-iodo-3-hexylthiothiophene, different from all the monomers used in the reported works in Rieke, modified McCullough and GRIM methods, is synthesized and which could be polymerized via GRIM methods with mild reaction conditions to produce poly(3-hexylthiothiophene) (P3HTT) with high regioregularity, designated molecular weight and narrow molecular weight distribution. By systematically investigating the influences of reaction parameters in GRIM polymerization on MW and MWD, including temperature and reaction time; it is found that the polymerization temperature is critical to the livingness of polymerization and which predominates the MW control. The success in precise synthesis of P3HTTs enable us to study the effects of regioregularity and molecular weights on the optical absorptions and electronic band structures as well as on the supramolecular organization.
URI: http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/59740
DOI: 10.6342/NTU201700535
全文授權: 有償授權
顯示於系所單位:材料科學與工程學系

文件中的檔案:
檔案 大小格式 
ntu-106-1.pdf
  目前未授權公開取用
2.75 MBAdobe PDF
顯示文件完整紀錄


系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。

社群連結
聯絡資訊
10617臺北市大安區羅斯福路四段1號
No.1 Sec.4, Roosevelt Rd., Taipei, Taiwan, R.O.C. 106
Tel: (02)33662353
Email: ntuetds@ntu.edu.tw
意見箱
相關連結
館藏目錄
國內圖書館整合查詢 MetaCat
臺大學術典藏 NTU Scholars
臺大圖書館數位典藏館
本站聲明
© NTU Library All Rights Reserved