請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/55152
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 盧信嘉 | |
dc.contributor.author | Po-Sheng Huang | en |
dc.contributor.author | 黃柏盛 | zh_TW |
dc.date.accessioned | 2021-06-16T03:49:08Z | - |
dc.date.available | 2015-03-13 | |
dc.date.copyright | 2015-03-13 | |
dc.date.issued | 2015 | |
dc.date.submitted | 2015-01-26 | |
dc.identifier.citation | [1] Tiku Yu and Gabriel M. Rebeiz, “A 24 GHz 6-Bit CMOS phased-array receiver,” IEEE Microw. Wireless Compon. Lett., vol. 18, no. 6, pp. 422-424, Jun. 2008.
[2] Chao-Hsiung Tseng, Chih-Jung Chen, and Tah-Hsiung Chu, “A low-cost 60-GHz switched-beam patch antenna array with Butler matrix network,” IEEE Antennas Wireless Propag. Lett., vol. 7, no.7, pp. 432-435, Jul. 2008. [3] Tiku Yu and Gabriel M. Rebeiz, “A 4-channel 24-27 GHz CMOS differential phased-array receiver,” in IEEE RFIC Symp. Dig., Jun. 2009, pp. 455-458. [4] Ming-Da Tsai and Arun Natarajan, “60GHz passive and active RF-path phase shifters in silicon,” in IEEE RFIC Symp. Dig., Jun. 2009, pp. 223-226. [5] Chao-Shiun Wang, Juin-Wei Huang, Kun-Da Chu, and Chorng-Kuang Wang, “A 60-GHz phased array receiver front-end in 0.13-um CMOS Technology,” IEEE Transactions on Circuits and Systems I: Regular Papers, vol. 56, no.10, pp. 2341-2352, Oct. 2009. [6] Dong-Woo Kang, Jeong-Geun Kim, Byung-Wook Min, and Gabriel M. Rebeiz, “Single and four-element Ka-band transmit/receive phased-array silicon RFICs with 5-bit amplitude and phase control,” IEEE Trans. Microw. Theory Tech., vol. 57, no. 12, pp. 3534-3543, Dec. 2009. [7] Dong-Woo Kang, Kwang-Jin Koh and Gabriel M. Rebeiz, “A Ku-band two-antenna four-simultaneous beams SiGe BiCMOS phased array receiver,” IEEE Trans. Microw. Theory Tech., vol. 58, no. 4, pp. 771-780, Apr. 2010. [8] Emanuel Cohen, Claudio G. Jakobson, Shmuel Ravid and Dan Ritter, “A bidirectional TX/RX four element phased-array at 60GHz with RF-IF conversion block in 90-nm CMOS process,” IEEE Trans. Microw. Theory Tech., vol. 58, no. 5, pp. 1438-1446, May 2010. [9] Wooyeol Choi, Konggyun Park, Youngmin Kim, Kihyun Kim, and Youngwoo Kwon, “A V-band switched beam-forming antenna module using absorptive switch integrated with 4x4 Butler matrix in 0.13-μm CMOS,” IEEE Trans. Microw. Theory Tech., vol. 58, no. 12, pp. 4052-4059, Dec. 2010. [10] Moon-Kyu Cho, Seung-Hwan Yoon, Sanghoon Sim, Laurence Jeon, and Jeong-Geun Kim, “CMOS-based Bi-directional T/R chipsets for phased array antenna,” in IEEE MTT-S Int. Microw. Symp. Dig., Jun. 2012, pp. 1-3. [11] Kiarash Gharibdoust, Naser Mousavi, Milad Kalantari, Mohsen Moezzi, and Ali Medi, “A fully integrated 0.18-μm CMOS transceiver chip for X-band phased-array systems,” IEEE Trans. Microw. Theory Tech., vol. 60, no. 7, pp. 2192-2202, Jul. 2012. [12] Jing-Lin Kuo, Yi-Fong Lu, Ting-Yi Huang, Yi-Long Chang, Yi-Keng Hsieh, Pen-Jui Peng, I.-Chih Chang, Tzung-Chuen Tsai, Kun-Yao Kao, Wei-Yua Hsiung, James Wang, Yungping Alvin Hsu, Kun-You Lin, Hsin-Chia Lu, Yi-Cheng Lin, Liang-Hung Lu, Tian-Wei Huang, Ruey-Beei Wu, and Huei Wang, “60-GHz four-element phased-array transmit/receive system-in-package using phase compensation techniques in 65-nm flip-chip CMOS process,” IEEE Trans. Microw. Theory Tech., vol. 60, no. 3, pp. 743-756, Mar. 2012. [13] Jeng-Han Tsai and Tian-Wei Huang, “35-65-GHz CMOS broadband modulator and demodulator with sub-harmonic pumping for MMW gigabit applications,” IEEE Trans. Microw. Theory Tech., vol. 55, no. 10, pp. 2075-2085, Oct. 2007. [14] I. Sarkas, M. Khanpour, A. Tomkins, P. Chevalier, P. Garcia, and S. P. Voinigescu, “W-band 65-nm CMOS and SiGe BiCMOS transmitter and receiver with lumped I-Q phase shifters,” in IEEE RFIC Symp. Dig., Jun. 2009, pp. 441-444. [15] Jihoon Kim, Wooyeol Choi, Youngrak Park, and Youngwoo Kwon, “60 GHz broadband image rejection receiver using varactor tuning,” in IEEE RFIC Symp. Dig., May 2010, pp. 381-384. [16] Y.-C. Tsai, J.-L. Kuo, J.-H. Tsai, K.-Y. Lin, and H. Wang, “A 50-70 GHz I/Q modulator with improved sideband suppression using HPF/LPF based quadrature power splitter,” in IEEE MTT-S Int. Microw. Symp. Dig., Jun. 2011, pp. 1-4. [17] Shau-Gang Mao and Yu-Zhi Chueh, “Broadband composite right/left-handed coplanar waveguide power splitters with arbitrary phase responses and balun and antenna applications,” IEEE Trans. Antennas Propag., vol. 54, no. 1, pp. 243-250, Jan. 2006. [18] Cheng-Jung Lee, Kevin M. K. H. Leong, and Tatsuo Itoh, “Broadband quadrature hybrid design using metamaterial transmission line and its application in the broadband continuous phase shifter,” in IEEE MTT-S Int. Microw. Symp. Dig., Jun. 2007, pp. 1745-1748. [19] Austin Ying-Kuang Chen, Hsiao-Bin Liang, Yves Baeyens, Young-Kai Chen, Jenshan Lin, and Yo-Sheng Lin, “Wideband mixed lumped-distributed-element 90° and 180° power splitters on silicon substrate for millimeter-wave applications,” in IEEE RFIC Symp. Dig., Apr. 2008, pp. 449-452. [20] Chao-Hsiung Tseng and Chih-Lin Chang, “A broadband quadrature power splitter using metamaterial transmission line,” IEEE Microw. Wireless Compon. Lett., vol. 18, no. 1, pp. 25-27, Jan. 2008. [21] Chao-Hsiung Tseng and Chih-Lin Chang, “Improvement of return loss bandwidth of balanced amplifier using metamaterial-based quadrature power splitters,” IEEE Microw. Wireless Compon. Lett., vol. 18, no. 4, pp. 269-271, Apr. 2008. [22] Chao-Hsiung Tseng and Chih-Lin Chang, “An image reject mixer with composite right/left-handed quadrature power splitter and IF hybrid,” J. of Electromagn. Waves and Appl., vol. 22, pp. 1557-1564, 2008. [23] Javier Mata-Contreras, Carlos Camacho-Penalosa, and Teresa M. Martin-Guerrero, “Active distributed mixers based on composite right/left-handed transmission lines,” IEEE Trans. Microw. Theory Tech., vol. 57, no. 5, pp. 1091-1101, May 2009. [24] D.V. Kholodnyak, I.B. Vendik, P.A. Turalchuk, E.Yu. Zameshaeva, and I.V. Munina, “Broadband microwave devices based on artificial transmission lines,” in Proc. 5th. Eur. Conf. Antennas and Propag. (EuCAP), Rome, Italy, Apr. 2011, pp. 2820-2824. [25] F. V. Minnaar, J. C. Coetzee, and J. Joubert, “A novel ultrawideband microwave differential phase shifter,” IEEE Trans. Microw. Theory Tech., vol. 45, no. 8, pp. 1249-1252, Aug. 1997. [26] A. M. Abbosh and M. Bialkowski, “Design of compact directional couplers for UWB applications,” IEEE Trans. Microw. Theory Tech., vol. 55, no. 2, pp. 194-189, Feb. 2007. [27] A. M. Abbosh, “Ultra-wideband phase shifters,” IEEE Trans. Microw. Theory Tech., vol. 55, no. 9, pp. 1935-1941, Sep. 2007. [28] Y.-S. Dai, D.-G. Fang, and Y.-X. Guo, “A novel miniature 1-22 GHz 90° MMIC phase shifter with microstrip radial stubs,” IEEE Microw. Wireless Compon. Lett., vol. 18, no. 2, pp. 109-111, Feb. 2008. [29] Slawomir Gruszcynski and Krzystof Wincza, “Broadband 4x4 Butler matrices as a connection of symmetrical multisection coupled-line 3-dB directional couplers and phase correction networks,” IEEE Trans. Microw. Theory Tech., vol. 57, no. 1, pp. 1-9, Jan. 2009. [30] Xinyi Tang and Koen Mouthaan, “Design of a UWB phase shifter using shunt λ/4 stubs,' in IEEE MTT-S Int. Microw. Symp. Dig., Jun. 2009, pp. 1021-1024. [31] Lamine M. Abdelghani, Tayeb A. Denidni, and Mourad Nedil, “Ultra-broadband 4x4 compact Butler matrix using multilayer directional couplers and phase shifters,” in IEEE MTT-S Int. Microw. Symp. Dig., Jun. 2012, pp. 1-3. [32] Hyukjin Kwon, Hongwook Lim, and Bongkoo Kang, “Design of 6-18 GHz wideband phase shifters using radial stubs,” IEEE Microw. Wireless Compon. Lett., vol. 17, no.3, pp. 205-207, Mar. 2007. [33] B. M. Schiffman, “A new class of broad-band microwave 90-degree phase shifters,” IRE Trans. Microw. Theory Tech., vol. 6, no. 2, pp. 232-237, Feb. 1958. [34] J.L.R. Quirarte and J.P. Starski, “Novel Schiffman phase shifters,” IEEE Trans. Microw. Theory Tech., vol. 41, no. 1, pp. 9-14, Jan. 1993. [35] Yong Xin Guo, Zhen Yu Zhang, and Ling Chuen Ong, “Improved wideband Schiffman phase shifter,” IEEE Trans. Microw. Theory Tech., vol. 54, no. 3, pp. 1196-1200, Mar. 2006. [36] S. Y. Zheng, S. H. Yeung, W. S. Chan, K. F. Man and Leung, “Improved broadband dumb-bell-shaped phase shifter using multi-section stubs,” Electron. Lett., vol. 44, no. 7, pp. 478-480, Mar. 2008. [37] S. Y. Zheng, W. S. Chan, and K. F. Man, “Broadband phase shifter using loaded transmission line,” IEEE Microw. Wireless Compon. Lett., vol. 20, no. 9, pp. 498-500, Sep. 2010. [38] S. H. Yeung, Q. Xue, and K. F. Man, “Broadband 90° differential phase shifter constructed using a pair of multisection radial line stubs,” IEEE Trans. Microw. Theory Tech., vol. 60, no. 9, pp. 2760-2767, Sep. 2012. [39] S. H. Yeung, Z. Mei, T. K. Sarkar, and M. Salazar-Palma, “Design and testing of a single-layer microstrip ultrawideband 90° differential phase shifter,” IEEE Microw. Wireless Compon. Lett., vol. 23, no. 3, pp. 122-124, Mar. 2013. [40] M. Sron, R. Lech, and J. Mazur, “Simulation and experiment of a compact wideband 90° differential phase shifter,” IEEE Trans. Microw. Theory Tech., vol. 60, no. 3, pp. 494-501, Mar. 2012. [41] A. M. Abbosh. “Broadband fixed phase shifters,” IEEE Microw. Wireless Compon. Lett., vol. 21, no. 1, pp. 22-24, Jan. 2012. [42] Y. Wang, M. E. Bialkowski, and A. M. Abbosh, “Double microstrip-slot transitions for broadband +/- 90° microstrip phase shifters,” IEEE Microw. Wireless Compon. Lett., vol. 22, no. 2, pp. 58-60, Feb. 2012. [43] Charles F. Campbell and Steven A. Brown, “A compact 5-bit phase-shifter MMIC for K-band satellite communication systems,” IEEE Trans. Microw. Theory Tech., vol. 48, no. 12, pp. 2652-2656, Dec. 2000. [44] Dong-Woo Kang, Hui Dong Lee, Chung-Hwan Kim, and Songcheol Hong, “Ku-band MMIC phase shifter using a parallel resonator with 0.18-μm CMOS technology,” IEEE Trans. Microw. Theory Tech., vol. 54, no. 1, pp. 294-301, Jan. 2006. [45] Dong-Woo Kang and Songcheol Hong, “A 4-bit CMOS phase shifter using distributed active switches,” IEEE Trans. Microw. Theory Tech., vol. 55, no. 7, pp. 1476-1483, Jul. 2007. [46] M. Meghdadi, M. Aziz, M. Kiani, A. Medi, and M. Atarodi, “A 6-bit CMOS phase shifter for S-band,” IEEE Trans. Microw. Theory Tech., vol. 58, no. 12, pp. 3519-3526, Dec. 2010. [47] Q. Xiao, “A compact L-band broadband 6-bit MMIC phase shifter with low phase error,” in Proc. 6th. Eur. Microw. Intrgr. Conf., Oct. 2011, pp. 410-413. [48] M. A. Morton, J. P. Comeau, J. D. Cressler, M. Mitchell, and J. Papapolymerou, “Sources of phase error and design considerations for silicon-based monolithic high-pass/low-pass microwave phase shifters,” IEEE Trans. Microw. Theory Tech., vol. 54, no. 12, pp. 4032-4040, Dec. 2006. [49] Byung-Wook Min and G. M. Rebeiz, “Ka-band BiCMOS 4-bit phase shifter with integrated LNA for phased array T/R modules,” in IEEE MTT-S Int. Microw. Symp. Dig., Jun. 2007, pp. 479-482. [50] Wei-Je Tseng, Chin-Shen Lin, Zuo-Min Tsai, and Huei Wang, “A miniature switching phase shifter in 0.18-μm CMOS,” in Proc. Acia-Pacific Microw. Conf., Dec. 2009, pp. 2132-2135. [51] Sang Young Kim and G. M. Rebeiz, “A 4-bit passive phase shifter for automotive radar applications in 0.13 μm CMOS,” in IEEE CSIC Symp. Dig., Oct. 2009, pp. 1-4. [52] X. Tang and K. Mouthaan, “Design considerations for octave-band phase shifters using discrete components,” IEEE Trans. Microw. Theory Tech., vol. 58, no. 12, pp. 3459-3466, Dec. 2010. [53] X. Tang and K. Mouthaan, “Phase-shifter design using phase-slope alignment with λ/4 grounded shunt stubs,” IEEE Trans. Microw. Theory Tech., vol. 58, no. 6, pp. 1573–1583, Jun. 2010. [54] H. Hayashi and M. Muraguchi, “An MMIC active phase shifter using a variable resonant circuit,” IEEE Trans. Microw. Theory Tech., vol. 47, no. 10, pp. 2021-2026, Oct. 1999. [55] P. Dueme, T. Dequen, R. Funck, B. Caillon, and G. Guerbeur, “Broadband active phase shifter GaAs MMIC,” in Proc. 32th. Eur. Microw. Conf., Sep. 2002, pp. 75-78. [56] K. Miyaguchi, M. Hieda, M. Hangai, T. Nishino, N. Yunoue, Yoshinobu Sasaki, and M. Miyazaki, “An ultra compact C-band 5-Bit MMIC phase shifter based on all-pass network,” in the 1st Eur. Microw. Integrated Circuits Conf., Sep. 2006, pp. 277-280. [57] M. Hangai, M. Hieda, N. Yunoue, Y. Sasaki, and M. Miyazaki, “S-and C band ultra-compact phase shifters based on all-pass networks,” IEEE Trans. Microw. Theory Tech., vol. 58, no. 1, pp. 41-47, Jan. 2010. [58] M. A. Antoniades and G. V. Eleftheriades, “Compact linear lead/lag metamaterial phase shifters for broadband applications,” IEEE Antennas Wireless Propag. Lett., vol. 2, no. 7, pp. 103–106, Jul. 2003. [59] A. Lai, T. Itoh, and C. Caloz, “Composite right/left handed transmission line metamaterials,” IEEE Microw. Mag., vol. 5, no. 3, pp. 34–50, Sep. 2004. [60] D.V. Kholodnyak, E.V. Serebryakova, I.B. Vendik, and O.G. Vendik, “Broadband digital phase shifter based on switchable right- and left-handed transmission line sections,” IEEE Microw. Wireless Compon. Lett., vol. 16, no. 5, pp. 258-260, May 2006. [61] M. Lapine, I.S. Nefedov, J. Sailly, and S. A. Tretyakov, “Artificial lines with exotic dispersion for phase shifters and delay lines,” in Proc. 36th. Eur. Microw. Conf., Sep. 2006, pp. 427-430. [62] S. Simion, G. Bartolucci, and R. Marcelli, “Composite right/left handed based 3-port broadband differential phase shifter,” in Proc. 41th. Eur. Microw. Conf., Oct. 2011, pp. 992-995. [63] Taehee Jang, Sung-Hyun Hwang, Yong-Seung Bang, Jong-Man Kim, Yong-Kweon Kim, Chang-Wook Baek, and Sungjoon Lim, “Switchable composite right/left-handed (S-CRLH) transmission line using MEMS switches,” IEEE Microw. Wireless Compon. Lett., vol. 19, no. 12, pp. 804-806, Dec. 2009. [64] X. Tang and K. Mouthaan, “Design of large bandwidth phase shifters using common mode all-pass networks,” IEEE Microw. Wireless Compon. Lett., vol. 22, no. 2, pp. 55-57, Feb. 2012. [65] D. M. Pozar, Microwave Engineering, 3rd ed. New York: Wiley, 1998. [66] Hsin-Chia Lu, Yen-Liang Kuo, Po-Sheng Huang and Yi-Long Chang, “Dual-band CRLH branch-line coupler in LTCC by lump elements with parasite control,” in IEEE MTT-S Int. Microw. Symp. Dig., Jun. 2010, pp. 393-396. [67] M. Studniberg and G. V. Eleftheriades, “A dual-band bandpass filter based on generalized negative-refractive-index transmission-lines,” IEEE Microw. Wireless Compon. Lett., vol. 19, no.1, pp. 18-20, Jan. 2009. [68] Feng Lin, Qing-Xin Chu and Zhe Lin, “A novel tri-band branch-line coupler with three controllable operating frequencies,” IEEE Microw. Wireless Compon. Lett., vol. 20, no.12, pp. 666-668, Dec. 2010. [69] Chung-Hao Tsai, Iat-In Ao Ieong, Hung-Chuan Chen and Tzong-Lin Wu, “A miniaturized and broadband balun using artificial coupled line with imaginary even-mode impedance,” IEEE Trans. Microw. Theory Tech., vol. 59, no. 9, pp. 2233-2240, Sep. 2011. [70] Seung-Hwan Kim, Jung-Ho Yoon, Young Kim and Young-Chul Yoon, “A novel modified Wilkinson divider using zero-degree phase shifting composite right/left-handed transmission line,” in IEEE MTT-S Int. Microw. Symp. Dig., May 2010, pp. 1556-1559. [71] S. H. Yeung, T. K. Sarkar, M. Salazar-Palma, and A. Garcia-Lamperez, “A multisection phase correcting network for broadband quadrature power splitter design,” IEEE Microw. Wireless Compon. Lett., vol. 23, no. 9, pp. 468-470, Sep. 2013. [72] A. S. Nagra, Jian Xu, E. Erker and R. A. York, “Monolithic GaAs phase shifter circuit with low insertion loss and continuous 0-360° phase shift at 20 GHz,” IEEE Micro. Guided Wave Lett., vol. 9, no.1, pp. 31-33, Jan. 1999. [73] F. Ellinger, H. Jackel and Werner Bachtold, “Varactor-loaded transmission-line phase shifter at C-band using lumped elements,” IEEE Trans. Microw. Theory Tech., vol. 51, no.4, pp. 1135-1140, Apr. 2003. [74] Young-Hoon Chun and Jia-Sheng Hong “A novel tunable transmission line and its application to a phase shifter,” IEEE Microw. Wireless Compon. Lett., vol. 15, no.11, pp. 784-786, Nov. 2005. [75] D. Kuylenstierna, A. Vorobiev, P. Linner and S. Gevorgian, “Composite right/left handed transmission line phase shifter using ferroelectric varactors,” IEEE Microw. Wireless Compon. Lett., vol. 16, no. 4, pp. 167-169, Apr. 2006. [76] Mohamed A. Y. Abdalla, Khoman Phang and George V. Eleftheriades, “A 0.13-μm CMOS phase shifter using tunable positive/negative refractive index transmission lines,” IEEE Microw. Wireless Compon. Lett., vol. 16, no. 12, pp. 705-707, Dec. 2006. [77] Choul-Young Kim, Jaemo Yang, Dong-Wook Kim and Songcheol Hong, “A K-Band CMOS voltage controlled delay line based on an artificial left-handed transmission line,” IEEE Microw. Wireless Compon. Lett., vol. 18, no. 11, pp. 731-733, Nov. 2008. [78] J. Perruisseau-Carrier, K. Topalli and T. Akin, “Low-loss Ku-band artificial transmission line with MEMS tuning capability,” IEEE Microw. Wireless Compon. Lett., vol. 19, no. 6, pp. 377-379, Jun. 2009. [79] K. Miyaguchi, M. Hieda, K. Nakahara, H. Kurusu, M. Nii, M. Kasahara, Tadashi Takagi and S. Urasaki, “An ultra-broad-band reflection-type phase-shifter MMIC with series and parallel LC circuits,” IEEE Trans. Microw. Theory Tech., vol. 49, no. 12, pp. 2446-2452, Dec. 2001. [80] F. Ellinger, R. Vogt, and Werner Bachtold, “Compact reflective-type phase-shifter MMIC for C-band using a lumped-element coupler,” IEEE Trans. Microw. Theory Tech., vol. 49, no. 5, pp. 913-917, May 2001. [81] B. Biglarbegian, M. R. Nezhad-Ahmadi, M. Fakharzadeh and Safieddin Safavi-Naeini,, “Milimeter-wave reflective-type phase shifter in CMOS technology,” IEEE Microw. Wireless Compon. Lett., vol. 19, no. 9, pp. 560-562, Sep. 2009. [82] Jen-Chieh Wu, Ting-Yueh Chin, Sheng-Fuh Chang and Chia-Chan Chang, “2.45-GHz CMOS reflection-type phase shifter MMICs with minimal loss variation over quadrants of phase-shift range,” IEEE Trans. Microw. Theory Tech., vol. 56, no. 10, pp. 2180-2189, Oct. 2008. [83] Pei-Si Wu, Hong-Yeh Chang, Ming-Da Tsai, Tian-Wei Huang and Huei Wang, “New miniature 15-20-GHz continuous-phase/amplitude control MMICs using 0.18-μm CMOS technology,” IEEE Trans. Microw. Theory Tech., vol. 54, no.1, pp. 10-19, Jan. 2006. [84] Pei-Si Wu, Hong-Yeh Chang, Ming-Fong Lei, Bo-Jr Huang, Huei Wang, Cheng-Ming Yu and J. G. J. Chern, “A 40-74 GHz amplitude/phase control MMIC using 90-nm CMOS technology,” in Micro. Integrated Circuit Conference, Oct. 2007, pp. 115-118. [85] Kwang-Jin Koh and G. M. Rebeiz, “0.13 μm CMOS phase shifters for X-, K-, and K-band phased arrays,” IEEE J. Solid-State Circuits, vol. 42, no. 11, pp. 2535-2546, Nov. 2007. [86] Kwang-Jin Koh, and Gabriel M. Rebeiz, “A 6-18 GHz 5-Bit Active Phase Shifter,” in IEEE MTT-S Int. Microw. Symp. Dig., pp. 792 - 795, May 2010. [87] T. M. Hancock and G. M. Rebeiz, “A 12-GHz SiGe phase shifter with integrated LNA,” IEEE Trans. Microw. Theory Tech., vol. 53, no. 5, pp. 977-983, Mar. 2005. [88] Jui-Chih Kao, Yuan-Hung Hsiao, Kuang-Sheng Yeh, Chau-Ching Chiong, Kun-You Lin and Huei Wang, “A 25-to-45-GHz 45° power divider,” in Proc. 43th. Eur. Microw. Conf., Oct. 2013, pp. 959-962. [89] D. Kuylenstierna, S. E. Gunnarsson, and H. Zirath, 'Lumped-element quadrature power splitters using mixed right/left-handed transmission lines,' IEEE Trans. Microw. Theory Tech., vol. 53, no. 8, pp. 2616-2621, Aug. 2005. [90] Po-Sheng Huang, Yi-Long Chang and Hsin-Chia Lu, “A compact broadband quadrature power splitter on LTCC,” in Proc. Acia-Pacific Microw. Conf., Dec. 2011, pp. 33-36. [91] B. Razavi, RF Microelectronics, 2nd ed.: Prentice Hall, 2011. [92] Po-Sheng Huang, Shuan-An Wei, Shan-Fon Hong, Jhi-Chow Lin, Bo-Yu Chen and Hsin-Chia Lu, “Phase shifters based on surface mount phase leading bandpass unit cells using low temperature cofired ceramic (LTCC),” in Proc. 42th. Eur. Microw. Conf., Oct. 2012, pp. 9-12. [93] Po-Sheng Huang and Hsin-Chia Lu, “Broadband differential phase shifter design using bridged T-type bandpass network,” IEEE Trans. Microw. Theory Tech., vol. 62, no. 7, pp. 1470-1479, Jul. 2014. [94] Po-Sheng Huang and Hsin-Chia Lu, “Improvement of the phase shifter in 90° power splitter for UWB applications,” IEEE Microw. Wireless Compon. Lett., Vol. 22, No.12, pp.621-623, Dec. 2012. [95] B. L. Nelson, D. K. Umemoto, C. B. Perry, R. Dixit, B. R. Allen, M. E. Kim, and A. K. Oki, “High-linearity, low dc power monolithic GaAs HBT broadband amplifiers to 11 GHz,” in IEEE Microw. Millimeterwave Monolit. Circuits Symp. Dig., 1990, pp. 15-18. [96] R. S. Engelbercht and K. Kurokawa, “A wideband low noise L-band balanced transistor amplifier,” Proc. IEEE, vol. 53, no. 3, pp. 237-248, Mar. 1965. [97] H.Wang, C. Sideris, and A. Hajimiri, “A 5.2-to-13 GHz class-AB CMOS power amplifier with a 25.2 dBm peak output power at 21.6% PAE,” in IEEE ISSCC Dig. Tech. Papers, Feb. 2010, pp. 12-14. [98] S. B. Cohn, “A class of broadband three-port TEM-mode hybrids,” IEEE Trans. Microw. Theory Tech., vol. 19, no. 2, pp. 110-116, Feb. 1968. [99] Hsin-Chia Lu, Che-Chung Kuo, Shuan-an Wei, Po-Sheng Huang and Huei Wang, “Ultra broad band CMOS balanced amplifiers using quadrature power splitters on glass integrated passive device (GIPD) and low temperature cofired ceramic (LTCC) with flip chip interconnects for SiP integration,” in IEEE MTT-S Int. Microw. Symp. Dig., Jun. 2011, pp. 1-3. [100] Chao-Hsiung Tseng and Chih-Lin Chang, “Wide-band balun using composite right-/left-handed transmission line,” Electron. Lett., vol. 43, no. 21, pp. 1154-1155, Oct. 2008. [101] Po-Sheng Huang and Hsin-Chia Lu, “Broadband low phase error phase shifter using high-pass network with a coupled line section,” Submitted to IEEE Microw. Wireless Compon. Lett.. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/55152 | - |
dc.description.abstract | 在本論文中首先探討傳統差相式相移器之特性及使用高通元件作為差相式相移器之侷限。因此進而提出兩種改良型差相式相移器之寬頻化架構,此兩種架構分別藉由SMD元件實現於印刷電路板上以及使用低溫共燒陶瓷製程上。
本論文首先分析使用高通型元件做為寬頻差相式相移器之特性,並且於低溫共燒陶瓷實現寬頻90°功率分離器,可操作於2.9 GHz至7.2 GHz頻寬為85 %,相位誤差為 ± 5°。同時將高通行元件透過低溫共燒陶瓷製程設計成表面黏著單元,可於印刷電路板上實現任意角度之差相式相移器,可操作於2.5 GHz至8 GHz,相對頻寬為104%。 第一種寬頻化差相式相移器架構是橋式T型帶通元件,透過一個橋式電容跨接於T型帶通元件之輸出與輸入兩端,可同時調整相位特性並且維持阻抗匹配特性,使用此橋式T型帶通元件實現寬頻差相式相移器,理論頻寬可增加至130%以上,透過SMD電容及電感元件於印刷電路板上實現90°、45°、22.5°寬頻差相式相移器可操作於0.55 GHz 至 2.51 GHz,相位誤差分別為 ± 5.5°、± 2.5°、± 1.5°,頻寬為125%、127 %、129%。 第二種寬頻化差相式相移器是改良式高通元件,於高通元件中加入耦合傳輸線,可同時達到調整相位並且維持阻抗匹配之特性,並於低溫共燒陶瓷製程上設計超寬頻帶90°功率分離器,透過MIM電容之寄生元件達成耦合傳輸線之效果,可有效縮小尺寸,此90°功率分離器操作於3.1 GHz 至 11.2 GHz 頻寬為112%。此超寬頻帶90°功率分離器可應用於平衡式放大器內之90度耦合器,由0.18微米互補式金氧半導體製程所製作功率放大器並透過覆晶連接技術片黏著於低溫共燒陶瓷基板上,實現一個3 GHz 至10.6 GHz 超寬頻平衡式功率放大器。 最後總結所實現之寬頻差相式相移器之特性與比較,使用者可透過比較表及根據所需要的相位誤差、阻抗匹配以及頻寬之需求,選擇適合實現之寬頻差相式相移器架構,透過論文可得到起始設計值。 | zh_TW |
dc.description.abstract | In this dissertation, the design and tradeoff of conventional phase shifters are discussed at first, and the bandwidth is accordingly limited by the topology of using high-pass network for differential phase shifter. This dissertation then aims to explore novel topologies for broadband and high performance differential phase shifters. Two topologies are proposed to extend the bandwidth of the phase shifters which are realized on printed circuit board (PCB) by surface mounted device (SMD) inductors and capacitors and realized in low temperature co-fired ceramic (LTCC), respectively.
The broadband phase shifter using the high-pass network is analyzed and applied to the quadrature power splitter in LTCC. This QPS operates from 2.9 GHz to 7.2 GHz with the fractional bandwidth (FBW) of 87% and phase error of ± 5°. Then, the arbitrary phase shifters are developed using the high-pass networks which are realized in SMD cells using LTCC process. These phase shifters are implemented on PCB by using SMD cells, and they operate from 2.5 GHz to 8 GHz with FBW of 104%. The first topology to extend the bandwidth is the bridged T-type bandpass network. By shunting a capacitor between input and output ports of the conventional T-type bandpass network, the phase delay of the bridged T-type bandpass network can be adjusted without deteriorating the return loss. The theoretical FBW of phase shifters using the bridged T-type bandpass networks can be increase to more than 130%. 22.5°, 45° and 90° phase shifters operating from 0.55 GHz to 2.51 GHz are demonstrated on PCB by SMD inductors and capacitors. Their phase errors are ± 1.5°, ± 2.5°, ± 5.5° and their FBW are 129%, 127 % and 125%, respectively. The second topology to extend the bandwidth is the modified high-pass network by adding the coupled line in the T-type high-pass network which can be utilized to adjust the phase delay while maintaining good impedance matching. The ultra-wideband (UWB) QPS is implemented by using the modified high-pass network in LTCC. The size of QPS is compact because the coupled line in the high-pass network is constructed by the parasitic components of metal-insulator-metal (MIM) capacitors. This QPS operates from 3.1 GHz to 11.2 GHz with FBW of 112%, and furthermore it can be applied to the couplers of the balanced amplifier. A UWB balanced power amplifier using CMOS 0.18μm and flip chip technology with proposed QPS is presented which operates from 3 GHz to 12 GHz. As a conclusion, a table summarize the phase shifters performance for designers’ reference. Designer can select proper topology based on the requirement for the return loss and phase shift. Then, the initial values can be obtained by given the operating frequency. | en |
dc.description.provenance | Made available in DSpace on 2021-06-16T03:49:08Z (GMT). No. of bitstreams: 1 ntu-104-F97943169-1.pdf: 10841098 bytes, checksum: 17de0a7c154f6117ac0670ec9ca5a4a9 (MD5) Previous issue date: 2015 | en |
dc.description.tableofcontents | 誌謝 i
摘要 iii ABSTRACT v CONTENTS vii LIST OF FIGURES xi LIST OF TABLES xvii Chapter 1 Introduction 1 1.1 Background and Motivation 1 1.2 Literature Review 2 1.3 Contributions 5 1.4 Thesis Organization 6 Chapter 2 Overview of Phase Shifters 9 2.1 Introduction 9 2.1.1 Absolute Phase Shifter 9 2.1.2 Differential Phase Shifter 10 2.1.3 Analog Phase Shifter 11 2.1.4 Switching Phase Shifter 12 2.2 Performance Indices of Differential Phase Shifters 13 2.2.1 Phase Error and Fractional Bandwidth of Differential Phase Shifter 13 2.2.2 Amplitude Imbalance and Return Loss of Differential Phase Shifter 14 2.3 Topologies of Differential Phase shifters 15 2.3.1 Schiffman Phase Shifter 15 2.3.2 Reflection Type Phase Shifter 17 2.3.3 Loaded Line Type Phase Shifter 19 2.3.4 Transmission Line Transition Type Phase Shifter 21 2.3.5 Metamaterial Type Phase Shifter 22 2.3.6 High and Low-Pass Type Phase Shifter 23 2.3.7 Bandpass and Allpass Type Phase Shifter 24 2.4 Conclusion 26 Chapter 3 Design of Broadband Differential Phase Shifters and Quadrature Power Splitter Using High-Pass Networks 30 3.1 Design of Differential Phase shifters and QPS 31 3.1.1 Topology of QPS 31 3.1.2 Design of the Differential Phase Shifter Using Ideal High-Pass Network 32 3.1.3 Design of Differential Phase Shifter Using the High-Pass Network Including Parasitic Components 37 3.2 Design of Quadrature Power Splitter (QPS) in LTCC 42 3.2.1 Design of Wilkinson Power Divider and QPS in LTCC [90] 42 3.2.2 Lumped Elements Realized in LTCC 45 3.2.3 90° Differential Phase Shifter Using High-Pass Networks 50 3.2.4 Design Procedure and Experimental Results 53 3.3 Arbitrary Phase Shifters Using Surface Mounted Phase Leading Bandpass Unit Cells 57 3.3.1 Design of Arbitrary Phase Shifters [92] 57 3.3.2 Experimental Results 63 3.4 Discussion on FBW of Phase Shifters 69 Chapter 4 Broadband Phase Shifters Using Bridged T-type Bandpass Networks 71 4.1 Design of Differential Phase Shifters Using Bridged T-type Bandpass Networks [93] 72 4.2 Design of Phase Shifters Using Bridged T-type Bandpass Networks 76 4.3 Experimental Results and Discussion 81 Chapter 5 Ultra-wideband Quadrature Power Splitter in LTCC and Ultra-wideband Balanced Power Amplifier 91 5.1 Ultra-Wideband Quadrature Power Splitter in LTCC 92 5.1.1 Design of UWB QPS [94] 92 5.1.2 Experimental Results of UWB QPS 97 5.2 QPS Application for Balanced Power Amplifier 100 5.2.1 Design of UWB Balance Power Amplifier [99] 100 5.2.2 Experimental Results of UWB Balance Power Amplifier 105 5.3 Low Phase Error Phase Shifter 108 5.3.1 Design of Phase Shifter Using High-Pass Network with a Coupled Line Section 108 5.3.2 Experimental Results of Low Phase Error Phase Shifter 114 5.4 Discussion 117 5.4.1 Return Loss of Balanced Amplifiers 117 5.4.2 Adding a Bridged Capacitor for a High-Pass Network with a Coupled Line Section 119 Chapter 6 Conclusions 123 6.1 Summary 123 6.2 Future works 130 6.2.1 Design of 180° Differential Phase Shifter 130 6.2.2 Design of Impedance Transforming QPS 131 Bibliography 133 Publication List 146 | |
dc.language.iso | en | |
dc.title | 寬頻差相式相移器設計 | zh_TW |
dc.title | Design of Broadband Differential Phase shifters | en |
dc.type | Thesis | |
dc.date.schoolyear | 103-1 | |
dc.description.degree | 博士 | |
dc.contributor.oralexamcommittee | 陳士元,?文化,王暉,張志揚,曾昭雄 | |
dc.subject.keyword | 高通元件,帶通元件,差相式相移器,超寬頻帶,90°功率分離器, | zh_TW |
dc.subject.keyword | high-pass network,bandpass network,differential phase shifter,ultra-wideband,quadrature power splitter (QPS)., | en |
dc.relation.page | 147 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2015-01-26 | |
dc.contributor.author-college | 電機資訊學院 | zh_TW |
dc.contributor.author-dept | 電子工程學研究所 | zh_TW |
顯示於系所單位: | 電子工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-104-1.pdf 目前未授權公開取用 | 10.59 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。