Skip navigation

DSpace

機構典藏 DSpace 系統致力於保存各式數位資料(如:文字、圖片、PDF)並使其易於取用。

點此認識 DSpace
DSpace logo
English
中文
  • 瀏覽論文
    • 校院系所
    • 出版年
    • 作者
    • 標題
    • 關鍵字
  • 搜尋 TDR
  • 授權 Q&A
    • 我的頁面
    • 接受 E-mail 通知
    • 編輯個人資料
  1. NTU Theses and Dissertations Repository
  2. 電機資訊學院
  3. 光電工程學研究所
請用此 Handle URI 來引用此文件: http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/51631
標題: 3D電極可變焦距大孔徑液晶透鏡之模擬和製作
Simulation and the Fabrication of Large Aperture, Focus-Tunable Liquid Crystal Lens with 3D Electrode
作者: Kuo-Hao Wu
吳國昊
指導教授: 蘇國棟(Guo-Dung J. Su)
關鍵字: 可變焦距透鏡,液晶透鏡,精密加工,VR/AR,近視校正,
Focus-tunable lens,Liquid crystal lens,Precision Machining,VR/AR,Nearsighted correction,
出版年 : 2020
學位: 碩士
摘要: 本論文主要介紹GRIN lens type大孔徑液晶透鏡的模擬方法以及相對簡單且成本較低的製程方法。模擬的部分主要介紹如何設計出立體漸變的電極結構產生漸變之電場分布使液晶分子旋轉至特定角度,讓其感受到等校於類似凹透鏡之相位曲線以達到散焦之效果。為了讓此研究可以應用在VR/AR使用者的近視校正上,我們設計了孔徑大約等於瞳孔大小的6mm 且其屈光度為 -5之液晶透鏡。在經過嚴謹準確的模擬之後,我們利用精密加工製作出具有立體漸變的電極結構之模具,接著利用 PDMS 以及 NOA65 製作透明且具有所設計之立體電極結構,之後在其表面旋轉塗佈上透明電極 PEDOT:PSS 後,就能得到所設計之立體電極,再來利用 NOA65 將電極填平並將其和具有 ITO 電極之玻璃基板塗佈上 PVA 後封裝,最後再灌入液晶,就可以得到我們所設計的大孔徑液晶透鏡。接著我們利用 CCD 觀察干涉條紋驗證在不同電壓下其屈光度和模擬結果有無差異,之後設計幾個實驗去觀測此液晶透鏡的成像效果如何。此元件我們認為可在 VR/AR 的近視校正以及其他可變焦之光學系統上的有所應用。
In this thesis, the simulation and the fabrication of the GRIN lens-type liquid crystal lens is demonstrated. The simulation part is about how to design the 3D gradient electrode structure to generate the gradient electric field that makes each LC director orient in specific orientation to obtain the defocus effect. It is expected that this research can solve the problem of nearsighted users of VR/AR. We design a liquid crystal lens which has an optical power of -5 diopters and the aperture is 6 mm. After rigorous and accurate simulation, we use Precision Machining to fabricate the aluminum mold which has the designed 3D structure and mold it with PDMS and NOA65 to make a transparent 3D structure. After we spin coated PEDOT:PSS on the surface, we can get the designed 3D electrode. Then we’ll flatten the surface of 3D electrode with NOA65 and assemble it with another ITO glass substrate. Finally, the liquid crystal is injected in the gap between two substrates, and we can finally obtain our designed large aperture liquid crystal lens. Afterwards, we use CCD to observe the interference fringes to verify whether the diopters are different with simulation under different voltages. Then we set up experimental tools to measure the image properties of the LC lens. This component is good for nearsighted correction in VR/AR system and also for optical zoom system and focus-tunable lens applications.
URI: http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/51631
DOI: 10.6342/NTU202002723
全文授權: 有償授權
顯示於系所單位:光電工程學研究所

文件中的檔案:
檔案 大小格式 
U0001-0908202017034100.pdf
  目前未授權公開取用
3.46 MBAdobe PDF
顯示文件完整紀錄


系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。

社群連結
聯絡資訊
10617臺北市大安區羅斯福路四段1號
No.1 Sec.4, Roosevelt Rd., Taipei, Taiwan, R.O.C. 106
Tel: (02)33662353
Email: ntuetds@ntu.edu.tw
意見箱
相關連結
館藏目錄
國內圖書館整合查詢 MetaCat
臺大學術典藏 NTU Scholars
臺大圖書館數位典藏館
本站聲明
© NTU Library All Rights Reserved