請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/43216
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 張陸滿 | |
dc.contributor.author | Ssu-Hsien Sung | en |
dc.contributor.author | 宋思賢 | zh_TW |
dc.date.accessioned | 2021-06-15T01:43:11Z | - |
dc.date.available | 2010-07-20 | |
dc.date.copyright | 2009-07-20 | |
dc.date.issued | 2009 | |
dc.date.submitted | 2009-07-12 | |
dc.identifier.citation | Bob McTague and George Jergeas.(2002).“Productivity Improvements on Alberta Major Construction Project”Construction Productivity Improvement Report/Project Evaluation Tool.
Clark A. Cory.(2001).“Utilization of 2D, .3D, or 4D CAD in Construction Communication Documentation”, Department of Computer Graphics Technology. Eknarin Sriprasert.(2003).“Multi-constrain information management and visualization for collaborative planning and control in construction”,Centre for Construction Innovation Research, University of Teesside Eknarin Sriprasert and Nashwan Dawood.(2002). “Requirements Identification for 4D Constraintbased Construction Planning and Control System”,Centre for Construction Innovation Research, University of Teesside. H.J. Wang.(2004).“4D dynamic management for construction planning andresource utilization”, Automation in Construction Volume 13, Issue 5, September 2004, Pages 575-589. Hsieh, S. H., C. S. Chen, Y. F. Liao, C. T. Yang, and I. C. Wu (2006). “Experiences on Development of a 4D Plant Construction Simulation System,” Proceedings of the Joint Conference on Computing and Decision Making in Civil and Building Engineering (in CD-ROM), Paper No. IC-335, Montreal, Canada, June 14-16, 2006, 8 pages. J. Gao & M. Fischer.(2005).“Experiences with 3D and 4D CAD on Building Construction Projects- Benefits for Project Success and Controllable Implementation Factors”,Conference on Information Technology in Construction. John Kunz & Martin Fischer.(2008). “Virtual Design and Construction: Themes, Case Studies and Implementation Suggestions”, CIFE Working Paper #097,Version 9. Jan A. Elfving,Iris D.Tommelein,Glenn Ballard.(2004).“Improving the delivery process for engineered-to-order products-Lessons learned from power distribution equipment”, 12th-annuel conference on lean construction(IGLC12),Copenhagen,Denmark. K.W. Chau.(2004). “4D dynamic construction management and visualization software: 1. Development”, Automation in Construction Volume 14, Issue 4, August 2005, Pages 512-52. K. W. Chau,M. Anson and J. P. Zhang.(2004). “Four-Dimensional Visualization of Construction Scheduling and Site Utilization”, Journal of Construction Engineering and Management, ASCE,Volume 130, Issue 4, pp. 598-606 Mark J. Clayton , Robert B. Warden , Thomas W. Parker.(2002). “Virtual construction of architecture using 3D CAD and simulation”, Department of Architecture, Texas A & M University-College Station, College Station. O. Salem, M.ASCE; J. Solomon; A. Genaidy; and I. Minkarah.(2006).“M.ASCE, Lean Construction: From Theory to Implementation”, Journal of Construction Engineering and Management, ASCE, Vol. 22, No. 4, October 2006, pp. 168-175 O.Salem,J.Solomon,A.Genaidy,and M.Luegring,”Site Implementation and Assessment of Lean Construction Techniques”, Lean Construction Journal 2005,Vol 2#2 October Su-Ling Fan, and H. P. Tserng.(2006).“Object-Oriented Scheduling for Repetitive Projects with Soft Logics”, Journal of Construction Engineering and Management, ASCE,Volume 132, Issue 1, pp. 35-48. Sven Bertelse.(2004). “Lean construction: Where are we and how to proceed”, Lean Construction Journal, Vol 1#1. Tsai, M. H., Kang, S. C., Hsieh, S. H., Kuo, C. H. ,Pei, T. J. Yeh, K. C. (2008). “Experiences on Study of Setting-up a 4D Construction Management Tool in a High-rise Construction Project,” ICCCBE XII, Beijing, China. October 16-18. Timo Hartmann.(2008).“Area of Application for 3D and 4D Models on Construction Project”, Journal of Construction Engineering and Management, ASCE,V olume 134, Issue 10, pp. 776-785 William A. Lichtig,Sutter Health.(2005). “Developing a Contracting Model to Support Lean Project Delivery”, Lean Construction Journal,Vol 2#1. Wang, H. J., Zhang, J. P., Chau, K.W., and Anson, M..(2004).“4D dynamic management for construction planning and resource utilization”, Automation in Construction, Vol. 13, pp. 575-589. Zaneldin, E., Hegazy, T., and Grierson, D.(2001).“Improving design coordination for building project”, Construction Engineering and Management, Vol. 127, No. 4,pp. 330-336. Zhang Jiaping.(2003). “A 4D Site Model And 4D Management System For Cinstruction Project”, Tsinghua University. Zhaoyang Ma.(2004).“Application of 4D for dynamic site layout and management of construction projects”, Automation in Construction,Volume 14, Issue 3, June 2005, Pages 369-38. 王斌弘、施乃中,3D物件辨識在建築工程生產行為之運用與發展,中華民國建築學會第十三屆建築研究成果發表會論文集,2001 王友亮,應用建築圖形元件於工程專案排程之研究王友亮,國立成功大學土木工程學系,2005 周慶桐,Garold D. Oberlender著,工程設計與施工管理項目管理第二版,2006 美商賓特利系統股份有限公司著,MicroStation入門 電腦輔助設計,2008 柯韋如,營造廠執行專案採購精實管理之研究,國立台灣大學土木工程學系,2007 張陸滿,「奈米時代之高科技廠房設施工程」,土木水利,中國土木水利工程學會,臺北,臺灣,2008,第35卷,第1期,第15-26頁 張書萍,高科技廠房營建工程特性之調查與分析,國立交通大學土木工程學系,2001 張智棋,4D施工計畫之資訊管理研究,國立成功大學土木工程學系,2004 許錦欽著,MicroStation-TriForma中文使用手冊,2002 黃价成,時程管理體系整合作法,國立成功大學土木工程學系,2000 曾國峯,建築工程3D施工順序模擬系統之研究,國立台灣大學土木工程學系,2007 鄭介旗,4D於困難施工對策研擬應用,國立成功大學土木工程學系,2005 陳建國,4D技術在工程項目管理中的應用和發展趨勢,基礎優化第25卷第4期,2004 陳朝和,時程規範,國立成功大學土木工程學系,2000 賴俊杰,精簡營建應用於鋼構工程供應鏈之研究,國立中央大學營建管理研究所,2006 魏誥辰,應用多維度建築圖形元件於營建專案分包商資訊管理之研究,國立成功大學土木工程學系,2005 | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/43216 | - |
dc.description.abstract | 高科技廠房營建工程具有興建工期短、動員人數多、材料用量多、界面複雜之特性,在整體專案進行中,界面資訊之傳遞和溝通,對於進度與成本具有極大影響。在施工管理中,精實營建(Lean Construction)提出因為無效率、錯誤、延遲及不良溝通上衍生出的工程問題,造成30%的營建成本浪費在人力與材料上,所以為了後續施工階段減少浪費,降低風險,本研究運用4D視覺化模型有效提供空間資訊傳達、模擬、評估、互動之特性,例如過往研究曾以視覺化方式管理空間衝突及模擬施工困難處等,但是國內使用4D技術大部分用於設計展示,對於實際施工管理應用並無效益。
本研究目的為運用圖型物件,落實4D視覺化技術於工地管理,並且符合精實營建理論之概念,研究範圍為施工管理,本研究流程如下:(一)建立以4D圖型為主的WBS(Work Breakdown Structure),稱為OBWBS (Object Block Work Breakdown Structure),以利定義專案中包商施作的作業項目之圖型。(二)規劃包商施工流程(三)將OBWBS所分類的圖型連結專案施工流程,進行4D模擬。而本研究模型應用可模擬工作流程以管理包商,利用4D模型比對現地進度,並且增進溝通與決策之效益,使得4D視覺化模型應用更具有實質的效益。 | zh_TW |
dc.description.abstract | The features of High-tech factory construction project include tight construction duration, numerous mobilization, high-volume of materials, and complexity of interfaces. In the overall project, the cost and the progress of construction are seriously affected by transmission of interface information.
According to Lean Construction Institute theory, due to inefficiency, errors, delay, and communications, 30% of the construction cost are wasted on manpower and material. Therefore, in order to reduce waste and risk in project planning and construction , this research intends to use 4D visualized model to facilitate the transmission interface of information. The purpose of this research aims to apply 4D visualized technology for facilitating construction site management and in line with the theory of Lean Construction concepts. The research project focuses on construction management, and its research process is as follows: the first step is to establish a Work Breakdwon Structure (WBS) based on 4D image, known as Object Block Work Breakdown Structure (OBWBS), which is advantageous to define images in the working items operated by the contractor of the project. The second step is to plan the construction process of contractors. Finally the images classified by OBWBS are linked to construction project process and carried out 4D simulation. Consequently, this 4D visualized model can be applied to simulate working process for various contrators work. Meanwhile, it can be used to verify how far is between the current stage and the ultimate result. The model can surely improve communication and efficiency of decision making. | en |
dc.description.provenance | Made available in DSpace on 2021-06-15T01:43:11Z (GMT). No. of bitstreams: 1 ntu-98-R96521706-1.pdf: 6321729 bytes, checksum: 66620052a3773781b23fab84cadef0da (MD5) Previous issue date: 2009 | en |
dc.description.tableofcontents | 目錄
第一章 緒論 1 1.1. 研究背景與動機 1 1.2. 研究目的 3 1.3. 研究範圍與流程 4 1.4. 論文架構 6 第二章 文獻回顧 7 2.1. 精實管理 7 2.1.1. 精實生產 7 2.1.2. 精實思維 8 2.1.3. 營建工程浪費情形 10 2.1.4. 精實營建理論 11 2.2. 4D視覺化應用 14 2.2.1. 4D模型理論 14 2.2.2. 4D互動模擬應用 15 2.2.3 物件導向概念 17 2.2.4. 2D、3D、4D比較 21 2.2.5. 圖檔資訊解析技術 22 2.3. 高科技廠房介紹 27 2.3.1. 高科技廠房定義 27 2.3.2. 高科技廠房之特性 30 2.3.3 高科技廠房施工進度控制 31 2.4. 小結 34 第三章 4D模型建置 36 3.1. 施工流程設計 36 3.1.1. 主要進度表 37 3.1.2. 工區劃分 38 3.1.3. 細部工作流程表 39 3.2. 4D圖塊解析 42 3.2.1. 建築元件資料庫 42 3.2.2. Work Package Model 44 3.2.3. OBWBS 45 3.2.4. OBWBS 階層劃分 46 3.2.5. 4D圖型定義 50 3.3. 4D模型資訊整合 53 3.3.1. MS-Project 54 3.3.2. Bentley MicroStation 57 3.3.3. ProjectWise Navigator 60 第四章 4D模型應用說明 61 4.1. 情境模擬案例建置 61 4.2. 工作流程模擬 65 4.2.1. 管理包商施作流程 65 4.2.2. 施工現場進度比對 66 4.2.3. 視覺化工項進度完成比例 67 4.3. 溝通、決策效益 70 4.3.1. 避免施作空間衝突 71 4.3.2. 施工動線模擬 72 4.3.3. 同步工程設計 74 4.4. 小結 76 第五章 結論與建議 77 5.1. 結論 77 5.2 未來相關研究建議 78 參考文獻 80 附錄 85 | |
dc.language.iso | zh-TW | |
dc.title | 應用圖型物件於施工管理之探討 -以高科技廠房預鑄工法為例 | zh_TW |
dc.title | Applying Object-Block-Based Visualization to Construction Site Management -A Precast Concrete Case in High-Tech Plant Construction | en |
dc.type | Thesis | |
dc.date.schoolyear | 97-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 陳柏翰,康仕仲,曾惠斌,陳士明 | |
dc.subject.keyword | 4維視覺化,3維圖型,高科技廠房,精實營建,要徑法,工作分解結構,電腦輔助設計, | zh_TW |
dc.subject.keyword | 4D visualization,image,High-Tech Plant,Work Breakdown Structure,Lean Construction,CAD,CPM, | en |
dc.relation.page | 88 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2009-07-13 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 土木工程學研究所 | zh_TW |
顯示於系所單位: | 土木工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-98-1.pdf 目前未授權公開取用 | 6.17 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。