請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/42155
標題: | 應用於3D-IC並使用垂直耦合電感之晶片間的無線連接 Wireless inter-chip signal interconnect using vertical coupled inductors for 3D-IC applications |
作者: | Guan-Ming Wu 吳冠明 |
指導教授: | 盧信嘉(Hsin-chia Lu) |
關鍵字: | 三維積體電路,耦合電感,振幅偏移調調變,鎖相迴路,被動混波器,整流器, 3D-IC,coupled inductor,ASK modulation,PLL,passive mixer,rectifier, |
出版年 : | 2008 |
學位: | 碩士 |
摘要: | 本論文提出一個使用了耦合電感濾波器於三維積體電路的晶片間連接。跟電容耦合相比,電感耦合的連接有比較好的通訊距離且可達到30微米的距離,較長的通訊距離意味著有較能抵抗製程上對不準的現象。我們使用振幅偏移調變技術來達到信號完整的傳送。發射器包含鎖相迴路做為本地震盪器並使用電晶體開關做為被動混波器,接收器則包含了整流器來解調訊號並使用限制器放大訊號。本連接方法操作在3.5Gbps時能達到6.77pJ/bit能量效率。此無線連接使用台灣積體電路公司0.18微米製程來驗證此電路架構。 A wireless interconnect for 3D-IC applications is implemented by using coupled inductor filter design. Inductive coupling interconnect has longer communication distance to 30μm as compared with capacitive interconnect. The longer distance means that it can resist the alignment mismatches and increase the yields for packaging. We use ASK modulation technique to transmit the data. In transmitter, a PLL is used as the local oscillator, and switches are used as passive mixer. In receiver, rectifiers are used to demodulate received signal, and cascaded limiters amplify the signal. This method has energy efficiency to 6.77pJ/bit at 3.5Gbps. The proposed wireless interconnect is implemented in TSMC 0.18μm process for demonstration of this architecture. |
URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/42155 |
全文授權: | 有償授權 |
顯示於系所單位: | 電子工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-97-1.pdf 目前未授權公開取用 | 6.33 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。