請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/41176
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 楊哲人(Jer-Ren Yang) | |
dc.contributor.author | Bo-Ming Huang | en |
dc.contributor.author | 黃柏銘 | zh_TW |
dc.date.accessioned | 2021-06-14T17:21:52Z | - |
dc.date.available | 2009-07-30 | |
dc.date.copyright | 2008-07-30 | |
dc.date.issued | 2008 | |
dc.date.submitted | 2008-07-24 | |
dc.identifier.citation | [1] T.Gladman, The Physical Metallurgy of Microalloyed Steels, p.240.
[2] N.Maruyama, R. Uemori, M. Sugiyama, Materials Science and Engineering A,Vol.250 ,1998 pp.2-7. [3] H.L. Andrade, M.G. Akben, J.J. Jonas, Metallurgical Transaction A, Vol.14A, 1983, pp.1976-1977. [4] M. GÓMEZ, S. F. MEDINA, A. QUISPE and P. VALLES, ISIJ International, Vol. 42 ,2002 , pp. 423–431. [5] L. E. Collins, J. R. Barry and J. D. Boyd: CCT Characteristics of Nb, V Microalloyed Steels, Proc. Conf. Phase Transformations in Ferrous Alloys, Metall. Soc. AIME and ASM, Philadelphia, PA , 1983. [6] H.Dyja, P. Korczak, J. Wachniak, Scandinavian Journal of Metallurgy,Vol.27, 1998,pp.143-147. [7] B.Dutta, C.M. Sellars,Materials Science and Technology, Vol. 3, 1987, pp.197-206. [8] C. Fossaert, G. Rees, T.Maurickx, H.K.D.H. Bhadeshia, Metallurgical And Materials Transaction A, Vol. 26A, 1995 pp.21-30. [9] M.H. Thomas and G.M. Michal,in”Solid-Solid Phase Transformations”ed.by H.I. Aaronson et al.AIME.New York,1982,pp.469-473. [10] J.R. Yang, C.Y. Huang, C.S. Chiou, Materials transactions- JIM, Vol.40, No.3, 1999, pp.199-208. [11] Onink. M, Hoogendoorn. T H M, Colijn. J, Materials Science Forum (Switzerland), Vol. 284-286, 1998, pp.185-192. [12] Kyung Jong. LEE, Jae Kon. LEE, Ki Bong. KANG and Ohjoon. KWON, ISIJ International, Vol. 32 ,1992, No. 3, pp.326-334. [13] Irina Loginova a, John Agren , Gustav Amberg, Acta Materialia Vol.52 ,2004, pp. 4055–4063. [14] S. Yamamoto, C. Ouchi, T. Osuka, Thermomechanical Processing of Microalloyed Asutenite, p.613. [15] C. Garcı´a-Mateo, B. Lo´ pez, J.M. Rodriguez-Ibabe, Materials Science and Engineering, Vol.A303, 2001, pp.216–225. [16] Yu Li, T.N. Baker, Materials Science Forum, Vols. 500-501, 2005 pp.237-244. [17] Y. LI, D. N. CROWTHER, M. J. W. GREEN, P. S. MITCHELL and T. N. BAKER, ISIJ International, Vol. 41, No. 1,2001, pp.46–55. [18] Kondo, Daisuke, Kunishige, Kazutoshi, Ueji, Rintaro, Hashimoto, Shunichi, Tetsu-to-Hagane (Journal of the Iron and Steel Institute of Japan), Vol. 93, No. 6, 2007, pp.451-458. [19] Sage, A M, Hot Working and Forming Processes [Proc. Conf.], Sheffield, England ,1979, pp.119-127. [20] Sage, A M, Specialty Steels and Hard Materials, 1982, pp.111-125. [21] S.S. Bhatnagar, B.K.Guha and R.K.Sinha, Journal of Materials Science, Vol. 14, No.7 ,1979, pp.1631-1640. [22] Irina Loginova a, John Agren , Gustav Amberg, Acta Materialia,Vol. 52 ,2004, pp.4055–4063. [23] Der-Hung Huang and G. Thomas:Met. Trans. A ,Vol. 8A, 1977 , p.1661. [24] A. Ali, M. Ahmed, F.H. Hashmi, and A.Q. Khan, Metallurgical Transactions A, Vol 24A, 1993, pp.2145-2150. [25] G.M. Pressouyre, G. Primon, R.Blandeau, J. Begoinot and J.M. Thomas, in”HSLA steel:Metallurgy and Applicatons”ed.by J.M.Grayed al, ASM, 1986, pp.243-252. [26] J.R.Yang, L.C.Chang, Materials Science and Engineering , Vol.A223 ,1997, pp.158-167. [27] S.S. Babu, H.K.D.H. Bhadeshia , Materials Science and Technology, Vol.6, 1990, p.1005. [28] R.W.K. Honeycombe, H.K.D.H. Bhadeshia, Steels Microstructure and Property, p.35. [29] R.W.K. Honeycombe, H.K.D.H. Bhadeshia, Steels Microstructure and Property, p.123. [30] J.D.Watson,P.G. McDougall,Acta Metallurgica, Vol. 21, 1973, pp.961-973. [31] K. Inoue, K. Mukerjee, K. Otsuka, H. Chen, Displacive Phase Transformations and Their Applications in Materials Engineering, 1998, pp.419-426. [32] H.K.D.H. Bhadeshia, D.V. Edmond, ACTA Metallurgica, Vol. 28, 1980, pp.1265-1273 [33] H.K.D.H. Bhadeshia, ACTA Metallurgica, Vol. 29, 1981, pp.1117-1130. [34] R.W.K. Honeycombe, H.K.D.H. Bhadeshia, Steels Microstructure and Property, p.40. [35] H.K.D.H. Bhadeshia, Scripta Metallurgica, Vol. 17, 1983, pp.1475-1479. [36] H.K.D.H. Bhadeshia, Materials Science and Technology, Vol. 1, 1985, pp.497-504. [37] Dominic Phelan, Nicole Stanford, Rian Dippenaar, Materials Science and Engineering A,Vol. 407, 2005, pp.127-134. [38] Dominic Phelan, Rian Dippenaar, Metallurgical and Materials Transaction A, Vol. 35A, 2004, pp.3701-3706. [39] P.H. Shipway, H.K.D.H. Bhadeshia, Materials Science and Engineering,Vol. A223, 1997, pp.179-185. [40] R.H. Larn, J.R. Yang, Materials Science and Engineering A, Vol.278, 2000, pp.278-291. [41] R.H. Larn, J.R. Yang, Materials Science and Engineering A, Vol.264, 1999, pp.139-150. [42] E.Levine, D.C. Hill, Metallurgical Transactions A, Vol 8A, 1977, pp.1453-1463. [43] CHEOL WOO CHOI, HYANG JIN KOH, and SUNGHAK LEE: Metallurgical And Materials Transactions A, Vol. 31A, 2000, p.2669. [44] H. CONRAD and G. SHCHOECK :ACTA Metallurgica, Vol.8 ,1960, pp.791-796. [45] R. W. K. Honeycombe & H. K. D. H. Bhadeshia :Steels, p.18-p22. [46] Hall, E. O.,Yield Point Phenomenon in Metals and Alloys, Macmillan, 1970. [47] N. J. PETCH: Acta Metallurgica, Vol. 12,1964, pp.59-65. [48] Hsun Hu, Metallurgical Transcation A, 1983, Vol 14A, p.85. [49] G. T. HANH: Acta Metallurgica, Vol. 10,1962, pp.727-738. [50] A. P. Coldren and J. L. Mihelich, Metal Science and Heat Treatment,1977, p.44-47. [51] J. R. Yang and H. K. D. H. Bhadeshia,:WELDING RESEARCH SUPPLEMENT, pp.305-307. [52] D.Z. Yang, D.K. Matlock, and G. Krauss, The Effect of Cold-Rolling on Aging of an Intercritically Annealed Mn-Si-C Steel, in Technology of Continuously Annealed Cold-Rolled Sheet Steel, R.Pradhan(Ed.),TMS-AIME,Warrendale,PA, 1985, pp.319-339. [53] H.K.D.H. Bhadeshia, Scripta Metallurgica, Vol. 14, 1980, pp.821-824. [54] Ham, R. K.. The determination of dislocation density in thin foils, Phil. Mag.Vol. 6, 1961, pp.1183-1184. [55] Hirsch, P., Howie, A., Nicholson, R. B., Phashley, D. W., and Whelan, M. J, Electron Microscopy of Thin Crystals. Published by Krieger, New York, N.Y. 1977, pp.416-425. [56] Edington, J. W., Practical Electron Microscopy in Materials Science. MacMillan, London, 1975, p.119. [57] M. R. STAKER and D. L. HOLT, Acta Metallurgica, Vol. 20,1972, pp.569-579. [58] Tomo Tanaka, Minoru Nishida, Koichi Hashiguchi and Toshiyuki Kato,in Structure and Properties of Dual-Phase Steels, edited by R.A. Kot and J.W. Morris, 1979, pp.221-241 [59] G. R. Speich and R. L. Miller, in Fundamentals of dual-phase steels, edited by R.A. Kot and B.L. Bramfitt, 1981, pp.279-304. [60] G. R. Speich, in Fundamentals of dual-phase steels, edited by R.A. Kot and B.L. Bramfitt, 1981, pp.3-45. [61] K.K. Ray, V. Toppo, S.B. Singh, Materials Science and Engineering A, Vol.420, 2006, pp.333-341. [62] M.N. Bassim, M.R. Boyoumi, Mater. Sci. Eng. ,Vol.81, 1986, pp.317–324. [63] SAHAY, S. K. Unpublished work, University of Cambridge. ,1985. [64] Shunichi HASHIMOTO, and Morifumi NAKAMURA, ISIJ International, Vol. 46, No. 10, 2006, pp.1510–1515. [65] David B.Willams and C.Barry Carter, Transmission Electron Microscopy, pp.361-363. [66] David B.Willams and C.Barry Carter, Transmission Electron Microscopy, pp.421-437. [67] Johnston, W.G. and Gilman, J.J. J. Appl. Phys.,Vol.30, 1959, p.129. [68] Cottrell, A.H. ,N.P.L. Symposium, 1963, No. 15, “Relation between structure and mechanical properties of metals”, p.456. [69] C. S. SMITH and L. GUTTMAN, Trans. Amer. Inst. Mining, Met. Petrol. Eng. Vol.197, 1953, p.81. [70] R. K. Ham ; N. G. Sharpe, Philosophical Magazine, Vol. 6, Issue 69 ,1961, pp.1193 – 1194. [71] J. E. Bailey ,P. B. Hirsch, Philosophical Magazine, Vol. 5, Issue 53 ,1960, pp.485 – 497. [72] R.A. GRANGE, Metallurgical Transcations, Vol. 4, 1973, pp.2231-2244. [73] T. KASUYA ,N. YURIOKA, WELDING RESEARCH SUPPLEMENT, Vol. 72, 1992, pp.263-267. [74] W. Sylwestrowicz and E. O. Hall, Proc. Phys. Soc., Vol. 31, 1951, pp.362-369. [75] CONRAD, H., J. Mech. Phys. Solids, Vol. 11, 1963, p.437. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/41176 | - |
dc.description.abstract | 在2005年間,有鑑於混凝土鋼筋中,所含的合金元素釩之國際價格上揚,故將鈮合金元素用來取代一部分的釩合金元素,預期保有晶粒細化與固溶強化的效果。但是,將釩與鈮以3:1的比例下添加至鋼筋中會在拉伸試驗中發現降伏點消失的情況,因此,將含鈮以及不含鈮鋼筋作一系列的顯微結構分析,以探討降伏點消失的原因。
將含鈮鋼筋以及不含鈮鋼筋兩種鋼材分析金相顯微組織,發現在鋼筋表面、1/2半徑處、中心處的顯微結構並無明顯變化。此外,在含鈮鋼筋中可以發現隨著鋼筋尺寸越大(成形應變量越小),則波來鐵越增加以及高溫肥粒鐵越減少。值得注意的是:含鈮鋼筋會產生多的費德曼肥粒鐵,若與不含鈮鋼筋組織作比較。再者,將含鈮鋼筋中的費德曼肥粒鐵以SEM的分析方式,可觀察到更細部的費德曼肥粒鐵外貌。再將費德曼肥粒鐵以及高溫肥粒鐵以TEM的分析,可以得到兩者內部差排結構的不同,並且可以明顯發現在費德曼肥粒鐵與高溫肥粒鐵的接觸界面處有偏高的差排密度。由一系列拉伸試驗所獲得的應力應變圖,對照所對應的顯微組織,明白地顯示含鈮的鋼筋大約含有體積百分比5% 費德曼肥粒鐵(其差排密度約2.46±0.91)×1014 m-2 ,此乃造成降伏點消失的主要原因。 本研究,將含鈮鋼筋施以低溫回火的熱處理(300℃,10hrs),發現原先的連續平滑的應力應變曲線會因為回火處理的關係而轉變成不連續且有降伏點的應力應變曲線。再以TEM分析費德曼肥粒鐵的差排密度,發現降為 (8.97±2.91)×1013 m-2 。此結果更肯定費德曼肥粒鐵之差排密度對降伏點現象之影響。 | zh_TW |
dc.description.abstract | Because of the rise in international price of alloy element V since 2005, alloy element Nb has partially substituted for V in reinforcing steel bars . It was expected that vanadium still kept the effect of solid-solution strengthening and grain refinement. However, the Nb-containing steel bars do not possess the yield-point phenomena during tensile test. This has puzzled civil engineers. In the present study, the microstructure of Nb-containing and Nb-free steel bars have been investigated. The corresponding the stress-strain curves have also been examined.
Optical Metallurgical observation for three sites in each of 14 different steel bars:surface, half radius region and central region have been done separately . More widmanstätten ferrite and more pearlite, but fewer allotriomorphic ferrite can been found in Nb-containing steel bars than that in Nb-free steel bars. It was found that the Nb-containing steels were with about 5 volume (%) widmanstätten ferrite . The microstructural details of widmanstätten ferrite have been investigated using transmission electron microscopy, and the dislocation density has been estimated to be about (2.46±0.91)×1014 m-2 . It is suggested that the formation of Widmanstätten ferrite with a high dislocation density, which is similar to a prestrain state, correlated with no yield-drop phenomenon. A Nb-containing steel bar (steel bar G) has been treated by a tempering at 300℃ for 10 hrs. The corresponding transmission electron microscopy has been studied. The dislocation density of Widmanstätten ferrite is found to decrease to (8.97±2.91)×1013 m-2. The tempering steel has been demonstrated to have a yield-point phenomenon. The result provides strong evidence to confirm that the dislocation density of widmanstätten ferrite should be the main factor to influence the yield-drop. | en |
dc.description.provenance | Made available in DSpace on 2021-06-14T17:21:52Z (GMT). No. of bitstreams: 1 ntu-97-R95527042-1.pdf: 29161366 bytes, checksum: a17d8245e089af95c0c3e42d008bb7d7 (MD5) Previous issue date: 2008 | en |
dc.description.tableofcontents | 口試委員會審定書 i
誌謝 ii 中文摘要 iii 英文摘要 iv 第一章:研究目的 1 第二章:研究背景 4 2-1 .鈮的添加對HSLA鋼材的效應 4 2-2 .釩的添加對HSLA鋼材的效應 9 2-3 .Allotriomorphic Ferrite(高溫肥粒鐵)之組織與相變態 10 2-4 .Widmanstätten ferrite(費德曼肥粒鐵)之組織與相變態 13 2-5 .Yield Drop Phenomenon效應 21 2.6 .差排密度量測方法與原理 35 第三章:SD420w鋼筋原材及實驗介紹 39 3-1 .鋼筋外型以及成分範圍 39 3-2 .實驗步驟與使用儀器 40 3-2-1.金相顯微組織的觀察步驟 40 3-2-2.電子探針X射線顯微分析 (EPMA) 的觀察步驟 40 3-2-3.金相定量分析軟體 40 3-2-4.微硬度分析儀 40 3-2-5.電子顯微鏡之觀察步驟 41 3-2-6.熱回火製程步驟 41 第四章:結果與討論 47 4-1 .含鈮鋼筋與不含鈮鋼筋之比較 47 4-1-1.含鈮鋼筋與不含鈮鋼筋之應力應變曲線圖比較 47 4-1-2. 含鈮鋼筋與不含鈮鋼筋之金相圖比較 50 4-1-3. 含鈮鋼筋之費德曼肥粒鐵的SEM與TEM觀察 70 4-1-4. 費德曼肥粒鐵在不同Two-Beam Condition下的差排結構觀察 74 4-1-5. 費德曼肥粒鐵的差排密度之定量 78 4-1-6. 含鈮鋼筋與不含鈮鋼筋之機械性質比較 80 4-2 .含鈮鋼筋的回火處理 82 4-2-1.回火前後含鈮鋼筋之應力應變曲線圖比較 82 4-2-2.回火前後的含鈮鋼筋之金相圖比較 85 4-2-3.回火前後的費德曼肥粒鐵之SEM影像比較 85 4-2-4.回火前後費德曼肥粒鐵之TEM比較 88 4-2-5.回火前後含鈮鋼筋之費德曼肥粒鐵的差排密度比較 91 4-2-6.回火前後含鈮鋼筋之機械性質比較 93 4-3 .高溫肥粒鐵的TEM觀察 95 4-3-1.含鈮鋼筋與不含鈮鋼筋的高溫肥粒鐵之TEM影響觀察 99 4-3-2.含鈮鋼筋與不含鈮鋼筋的高溫肥粒鐵之差排密度與硬度比較 104 4-3-3.含鈮鋼筋的高溫肥粒鐵回火前後之TEM影響觀察 107 4-3-4.含鈮鋼筋的高溫肥粒鐵回火前後之差排密度與硬度比較 110 4-4 .Weak-Beam Condition與Two-Beam Condition的差排密度量測之比較 ………………………………………………………………………………112 4-5 .差排密度與降伏點現象之探討 114 第五章:結論 120 參考文獻 121 | |
dc.language.iso | zh-TW | |
dc.title | 含鈮鋼筋顯微組織與無降伏現象之探討 | zh_TW |
dc.title | A Investigation on Microstructure and No Yield Point phenomena of Reinforcing steel bar with Nb | en |
dc.type | Thesis | |
dc.date.schoolyear | 96-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 林新智(Hsin-Chih Lin),王星豪(Shing-Hoa Wang),黃慶淵,何長慶 | |
dc.subject.keyword | 費德曼肥粒鐵,差排密度,降伏點現象,低溫回火,鈮原子, | zh_TW |
dc.subject.keyword | Widmanst&auml,tten ferrite,Dislocation density,Yield Point,Tempering,Niobium., | en |
dc.relation.page | 128 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2008-07-26 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 材料科學與工程學研究所 | zh_TW |
顯示於系所單位: | 材料科學與工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-97-1.pdf 目前未授權公開取用 | 28.48 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。