請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/40122
標題: | 使用氧化鋁及低溫共燒陶瓷製程設計V-band基版合成波導帶通濾波器與矩形環狀帶通濾波器 The design of V-band band-pass filters using substrate integrated waveguide and rectangular ring resonator by alumina and LTCC process |
作者: | Jhih-kuan Wu 吳致寬 |
指導教授: | 盧信嘉 |
關鍵字: | 帶通濾波器,基板合成波導, band-pass filters,substrate integrated waveguide, |
出版年 : | 2008 |
學位: | 碩士 |
摘要: | 為了在毫米波段提供5GH 頻寬的高速通訊,本論文將針對60GHz 和
70GHz 頻段來設計帶通濾波器。 在本論文中,所使用的設計結構包含兩種。第一種為矩形環結構,此結構可以自動產生兩個傳輸零點,而且會有較大的頻寬,但是並不適用於窄頻的應用。第二種則是基板合成波導共振腔結構,利用基板合成波導優秀的特性來設計共振腔濾波器,此架構可以設計較窄頻寬。在此架構內加入並聯的共平面波導傳輸線可以產生額外的傳輸零點。此兩種架構都製作在低溫共燒陶瓷基板上,但僅有基板合成波導共振腔結構製作在氧化鋁基板上。目前所設計濾波器,除了LTCC 60GHz 以外,其輸入阻抗皆小於2.8 dB。而矩形環結構的頻寬為21.35%,基板合成波導共振腔結構的頻寬為6.8%。 In order to provide the high speed communication with 5GHz bandwidth, this thesis focus on the design of 60GHz-band and 70GHz-band bandpass filters. In this thesis, there are two design structures. The first one is a rectangular ring structure. This structure can create two transmission zeros and have large bandwidth. But this structure is not suitable for the narrowband bandpass filter. The second one is using substrate integrated waveguide (SIW) cavity structure with coupled resonators. Because of the low loss of SIW, we can design SIW filter well. This structure can make the narrowband bandpass filter. Adding the shut CPW lines can introduce an additional transmission zero. We make these two structures on the LTCC substrate. But only the second structure is made on the alumina substrate. Besides the LTCC 60GHz BPF, the insertion loss are less than 2.8dB for all filters. The bandwidth of the rectangular ring structure BPF is 21.35%. And the bandwidth of SIW cavity structure BPFs are 6.8% |
URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/40122 |
全文授權: | 有償授權 |
顯示於系所單位: | 電機工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-97-1.pdf 目前未授權公開取用 | 3.47 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。