請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/36077
標題: | Thermal Analysis of Closed Loop Pulsating Heat Pipe |
作者: | Ramesh Uppala 迦文西 |
指導教授: | 陳炳煇(Ping-Hei Chen) |
關鍵字: | 脈衝熱管,兩相流,電子散熱,流場分析, Pulsating heat pipe,Two-phase loop,Electronic cooling,Flow pattern, |
出版年 : | 2004 |
學位: | 碩士 |
摘要: | This study aims to flow visualization and thermal analysis of a closed loop pulsating heat pipe based on inclination angle, charging ratio, type of fluid and heat flux for thermal control of micro electronic equipments. Although a variety of designs are in use, understanding of the fundamental processes and parameters affecting the PHP operation are still vague. A vertical, closed loop, glass PHP with water, methanol and 2-propanol as working fluids is first experimentally investigated for a range of heat inputs, inclination angles and charging ratios. Experimental studies are performed on a PHP, consisting of a heating section, an adiabatic section and a condensation section incorporating heat sink. The capillary tube used in this study has an inside diameter of 2mm and a wall thickness of 3mm.Total length of the pulsating heat pipe is 350cm. The experiments are conducted under forced convection cooling at the condenser section, with heating powers from 10 to 110W, with different heating modes (locations) and charging ratios from 30% to 80%. The experimental results show that the system presented better performance when operating at vertical orientation. Optimal charging ratio is 50% for DI water, 40% for methanol and 40% for 2-propanol. Regarding working fluid the PHP shows better performance when Methanol is used in vertical orientation with the lowest evaporator section temperatures. |
URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/36077 |
全文授權: | 有償授權 |
顯示於系所單位: | 機械工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-93-1.pdf 目前未授權公開取用 | 916.07 kB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。