請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/32834
標題: | 利用RFID技術製作可撓性表面濕潤感測器之研究 Development of a Flexible Surface Wetness Sensor Using RFID Technique |
作者: | Bo-Yan Wang 王柏諺 |
指導教授: | 陳炳煇(Ping-Hei Chen) |
關鍵字: | 可撓性感測器,表面濕潤感測器,射頻身分識別,被動式標籤,電感耦合,13.56MHz,軟性印刷電路板, flexible sensor,surface wetness,RFID,passive tag,inductive coupling,13.56 MHz,FPCB, |
出版年 : | 2006 |
學位: | 碩士 |
摘要: | The present study develops a flexible sensor for detecting surface wetness and the sensor transmits the information of RF signal based on RFID technique. The operation frequency of the RFID system is at 13.56MHz.
The MEMS process was employed to fabricate the antenna and the sensor of RFID tag on FPCB. The shape of the RFID tag’s antenna is designed as octangle that surrounds a comb shape sensor. The transmitting information of the RFIC is changed as the surface condition of sensor changed from dry to wet and it can be observed on the screen of the digital oscilloscope. The simulations of the equivalent circuits of the RFID tag and of the S-parameter are also obtained in this study. The simulation results show the operation voltage of the RFIC, the quality factor (Q-factor) and the resonant frequency of the RFID system. The RFID tag’s antenna has an outer diameter of 2.7 cm and the quality factor of the RFID tag has a value of 10.05. The tag and the reader of RFID system are communicated through inductive coupling and the maximum transmitting range of the RF signal is about 15 cm |
URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/32834 |
全文授權: | 有償授權 |
顯示於系所單位: | 機械工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-95-1.pdf 目前未授權公開取用 | 5.28 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。