請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/31791
標題: | 128°YX-LiNbO3基底表面聲波式溼度感測器之研究 Study of 128°YX-LiNbO3 Based Surface Acoustic Wave Humidity Sensor |
作者: | Jun-Yi Wu 吳俊億 |
指導教授: | 吳政忠(Tsung-Tsong Wu) |
關鍵字: | 表面聲波,共振器,溼度感測器,聚乙基亞胺,噴槍,靈敏度, Surface acoustic wave,Resonator,Humidity sensor,Polyethylenimine,Airbrush,Sensitivity, |
出版年 : | 2006 |
學位: | 碩士 |
摘要: | With the development of industries, there is a growing need for sensitive, accurate, and inexpensive sensors of measuring relative humidity. Humidity sensors are expected for a broad spectrum of applications in meteorology, chemical industry, process control, medical instrument, agriculture, and etc. A good sensor should be characterized by high sensitivity, wide dynamic range, fast response, good reproducibility, easy interface electronics, small size, and minimum cost. It is hard for single sensing system matches all these criterions. However, surface acoustic wave ( SAW) sensing devices are promising candidates to pursue the above goals.
In this thesis, the 145MHz based SAW resonator is fabricated and integrated with the amplifier to form a SAW-based oscillator. To function as a humidity sensor, hygroscopic polymer polyethylenimine is coated on the delay line of the resonator as sensing film by airbrush method. Moreover, dual delay line configuration is constructed for the common mode rejection for external influences such as temperature, drift, etc. Then, the sensing devices are exposed to repeated cycles with various relative humidity to investigate the performances including sensitivity, reproducibility, and repeatability. The results reveal good linearity between frequency shifts and various relative humidity and enough short-term repeatability. |
URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/31791 |
全文授權: | 有償授權 |
顯示於系所單位: | 應用力學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-95-1.pdf 目前未授權公開取用 | 1.64 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。