請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/31541
標題: | 不同試驗種類間不排水剪力強度之關聯性 Correlation between Undrained Shear Strength of various Tests |
作者: | Wen-Ting Lee 李文婷 |
指導教授: | 卿建業 |
關鍵字: | 不排水剪力強度,OCR,應變速率,相關係數,不確定性, undrained shear strength,OCR,strain rate,correlation,uncertainty, |
出版年 : | 2011 |
學位: | 碩士 |
摘要: | 前人研究結果顯示出不同試驗測得之不排水剪力強度s_u有很大的差異,應該選用何種試驗求得最接近現場之不排水剪力強度。不同結構物及載重下造成土壤受力不同,土壤破壞面力學行為類似於試驗為TC、DSS及TE。為了符合現地狀況因此適宜選用CAUC(CK_0UC)、DSS及CAUE此三種試驗求得的不排水剪力強度。
目前工程基於成本及方便性上考量,大都採用VST、UU或UC試驗求取不排水剪力強度,其不排水剪力強度與現地實際s_u值仍有很大差異。影響不排水剪力強度重要因素有不同試驗、OCR及應變速率,因此本研究收集各國家資料,探討不同試驗之s_u、OCR及應變速率之間關係,找出試驗間之關連性及不確定性並求得不排水剪力強度設計參數。 The undrained shear strength s_u of different tests was found that have great differences in accordance with previous research. What is the type of undrained shear strength tests matches the in-situ condition best. Difference structures and load cause soil forced is difference. Failure surface of soil mechanics behavior that is similar to TC、DSS and TE test. For matching in-situ condition chose undrained shear strength of CAUC、DSS and CAUE tests . At present, engineering in view of cost and convenience mostly chose undrained shear strength of VST、UU or UC test that have great differences between in-situ condition. The OCR and strain rate are influencing the undrained shear strength ratio factors except difference tests. For undrained shear strength design parameters, probing into undrained shear strength of different tests、OCR and strain rate relationship with undrained shear strength in Various countries. |
URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/31541 |
全文授權: | 有償授權 |
顯示於系所單位: | 土木工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-100-1.pdf 目前未授權公開取用 | 4.33 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。