請用此 Handle URI 來引用此文件：
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/30724完整後設資料紀錄
| DC 欄位 | 值 | 語言 |
|---|---|---|
| dc.contributor.advisor | 韋文誠 | |
| dc.contributor.author | Yu-Ju Chen | en |
| dc.contributor.author | 陳右儒 | zh_TW |
| dc.date.accessioned | 2021-06-13T02:13:33Z | - |
| dc.date.available | 2010-06-15 | |
| dc.date.copyright | 2007-06-15 | |
| dc.date.issued | 2007 | |
| dc.date.submitted | 2007-05-29 | |
| dc.identifier.citation | 1. A. Fluegel, “Sealing Glass-Ceramics for Planar Solid Oxide Fuel
Cells Literature Review”, webpage, http://glassproperties.com/sofc/, 2005. 2. A. Weber, and E. Ivers-Tiffee, “Materials and concepts for solid oxide fuel cells (SOFCs) in stationary and mobile applications”, J. Power Sources, 127 (2004) 273-283. 3. A. D. Le Claire, “The analysis of grain boundary diffusion measurements”, J. Appl. Phys., 14 (1963) 351-356. 4. C. Lara, M. J. Pascual, and A. Duran, “Glass-forming ability, sinterability and thermal properties in the systems RO-BaO-SiO2 (R=Mg, Zn)”, J. Non-Cryst. Solids, 348 (2004) 149-155. 5. C. Lara, M. J. Pascual, R. Keding, and A. Duran, “Electrical behaviour of glass-ceramics in the systems RO-BaO-SiO2 (R=Mg, Zn) for sealing SOFCs”, J. Power Sources, 157 (2006) 377-384. 6. C. Lara, M. J. Pascual, M.O. Prado, and A. Duran, “Sintering of glasses in the system RO-Al2O3-BaO-SiO2 (R=Ca, Mg, Zn) studied by hot-stage microscopy”, Solid State Ionics, 170 (2004) 201-208. 7. C. Singhal, and K. Kendall, High Temperature Solid Oxide Fuel Cells: Fundamentals, Design and Applications, Elsevier Ltd., 2003. 8. D. Kek, P. Panjan, E. Wanzenberg, and J. Jamnik, “Electrical and microstructural investigation of cermet anode/YSZ thin film systems”, J. Eur. Ceram. Soc., 21 (2001) 1861-1865. 9. D. Kim, J. Lee, J. Huh, and H. Kim, “Thermal and electrical properties of BaO–B2O3–ZnO glasses”, J. Non-Cryst. Solids, 306 (2002) 70–75. 10. D. Briand, P. Weber, and N. F. Rooij, “Bonding properties of metals anodically bonded to glass”, Sensors and Actuators, A 114 (2004) 543–549. 11. E. Wanzenberg, F. Tietz, D. Kek, P. Panjan, and D. Stover, “Influence of electrolyte contacts on conductivity measurements of thin YSZ electrolyte films and the impact on solid oxide fuel cells”, Solid State Ionics, 164 (2003) 121-129. 12. E. Wanzenberg, F. Tietz, P. Panjan, and D. Stover, “Influence of preand post-heat treatment of anode substrates on the properties of DCsputtered YSZ electrolyte films”, Solid State Ionics, 159 (2003) 1-8. 13. F. Muller, H. P. Steier, and J. S. Moya, “Reactive coating of magnetite by a PbO-B2O3-SiO2 glass”, J. Eur. Ceram. Soc., 16 (1996) 985-988. 14. F.Tietz, H.-P. Buchkremer, abd Stover, “Components manufacturing for solid oxide fuel cells”, Solid State Ionics, 152-153 (2002) 373-381. 15. G. Cacciola, V. Antonucci, and S. Freni, J. Power sources, 100 (2001) 67-79. 16. H. Rawson, Properties and Applications of Glass, Ch3 & Ch8, Elsevier Science Publishing Company Inc., 1980. 17. I. Dyamant, D. Itzhak, and J. Hormadaly, “Thermal properties and glass formation in the SiO2-B2O3-Bi2O3-ZnO quaternary system”, J. Non-Cryst. Solids, 351 (2005) 3503-3507. 18. J. Lee, T. Lee, C. Huang, and W. Pan, “Devitrification studies of the PbO-ZnO-B2O3 glass system with added SiO2, BaTiO3 and NiO2”, Thermo. Acta, 212 (1992) 13-18. 19. J. Jean, C. Chang, S. Lin, and S. Yang, “Low-dielectric compositions with controlled crystallization and thermal expansion.” Mater. Chem. Phys., 43 (1996) 31-37. 20. J. Will, A. Mitterdorfer, C. Kleinlogel, D. Perednis, and L. J. Gauckler, “Fabrication of thin electrolytes for second-generation solid oxide fuel cells”, Solid State Ionics, 131 (2000) 79-96. 21. J. Fergus, “Sealants for solid oxide fuel cells”, J. Power Sources, 147 (2005) 46-57. 22. K. L. Ley, M. Krumpelt, R. Kumar, J. H. Meiser, and I. Bloom, “Glass-ceramic for solid oxide fuel cells: Part I. Physical properties”, J. Mater. Res., 11 (1996) 1489-1493. 23. K. S. Weil, C. A. Coyle, J. S. Hardy, J. Y. Kim, and G. Guangxia, “Alternative planar SOFC sealing concepts”, Fuel Cells Bulletin, 5 (2004) 11-16. 24. K. Eichler, G. Solow, P. Otschik, and W. Schaffrath, “BAS (BaO· Al2O3·SiO2)-glasses for High Temperature Applications”, J. Eur. Ceram. Soc., 19 (1999) 1101-1104. 25. Kingery, Bowen, and Uhlmann, Introduction to Ceramics (陶瓷材料 概論), Ch3, Ch12 & Ch17, 曉園出版社, 1987. 26. K. Kowalski, A. Bernsik, and A. Sadowski, “Bulk and grain boundary diffusion of titanium in yttria-stabilized zirconia”, J. Eur. Ceram. Soc., 20 (2000) 951-958. 27. K. Kowalski, E. –G. Moya, and J. Nowotny, “Grain boundary diffusion in CoO”, J. phys. Chem. Solids, 57 (1996) 153-163. 28. M. Brochu, B.D. Gauntt, R. Shah, G. Miyake, and R. E. Loehman, “Comparison between barium and strontium-glass composites for sealing SOFCs”, J. Eur. Ceram. Soc., xxx (2005) xxx-xxx. (Publishing accessing) 29. M. J. Pascual, V. V. Kharton, E. Tsipis, A. A. Yaremchenko, C. Lara, A. Duran, and J.R. Frade. “Transport properties of sealants for hightemperature electrochemical applications I. RO-BaO-SiO2 (R=Mg, Zn) glass-ceramics” J. Eur. Ceram. Soc., xxx (2005) xxx-xxx. (Publishing accessing) 30. M. Brochu, B.D. Gauntt, R. Shah, G. Miyake, and R.E. Loehman, “Comparison between barium and strontium-glass composites for sealing SOFCs”, J. Eur. Ceram. Soc., xxx (2005) xxx-xxx. (Publishing accessing) 31. N. Lahl, K. Singh, L. Singheiser, and K. Hilpert, “Crystallization kinetics in AO-Al2O3-SiO2-B2O3 glasses (A=Ba, Ca, Mg)”, J. Mater. Sci., 35 (2000) 3089-3096. 32. P. H. Larsen, F. W. Poulsen, and R. W. berg, “The influence of SiO2 addition to MgO-Al2O3-3.3P2O5 glass”, J. Non-Cryst. Solids, 244 (1999) 16-24. 33. R. M. Waser, “Microstructure of ceramic thin films”, Ceramics Composites and Intergrowths, (1996) 706-714. 34. R. Zheng, S. R. Wang, H. W. Nie, and T. L. Wen, “SiO2-CaO-B2O3- Al2O3 ceramic glaze as sealant for planar ITSOFC”, J. Power Sources, 128 (2004) 165-172. 35. S. Sohn, S. Choi, G. Kim, H. Song, and G. Kim, “Suitable Glass- Ceramic Sealant for Planar Solid-Oxide Fuel Cells”, J. Am. Ceram. Soc., 87(2004) 254-60. 36. S. Sohn, S. Choi, G. Kim, H. Song, and G. Kim, “Stable sealing glass for planar solid oxide fuel cell”, J. Non-Cryst. Solids, 297 (2002) 103- 112. 37. S. S. Kim, and T. H. Sanders, ”Thermodynamic Assessment of the Miscibility Gaps and the Metastable Liquidi in the B2O3-RO Systems (R=Mg, Ca, Sr, and Ba)”, J. Am. Ceram. Soc., 86 (2003) 1947-1952. 38. S. Sindhu, S. Sanghi, A. Agarwal, V. P. Seth, and N. Kishore, “Structural, optical, physical and electrical properties of V2O5·SrO·B2O3 glasses”, Spectrochimica Acta Part A, 64 (2005) 196- 204. 39. S. Sindhu, S. Sanghi, A. Agarwal, V.P. Seth, and N. Kishore, “Effect of Bi2O3 content on the optical band gap, density and electrical conductivity of MO·Bi2O3·B2O3 (M=Ba, Sr) glasses”, Mater. Chem. Phys., 90 (2005) 83-89. 40. V. A. C. Haanappel, V. Shemet, I. C. Vinke, and W. J. Quadakkers, “A novel method to evaluate the suitability of glass sealant-alloy combinations under SOFC stack conditions”, J. Power Sources, 141 (2005) 102-107. 41. V. A. C. Haanappel, V. Shemet, S. M. Gross, Th. Koppitz, N. H. Menzler, M. Zahid, and W. J. Quadakkers. “Behaviour of various glass-ceramic sealants with ferritic steels under simulated SOFC stack conditions”, J. Power Sources, 150 (2005) 86-100. 42. W. Vogel, Chemistry of Glass, Ch2 & Ch9, American Ceramic Society, Inc., 1985. 43. Website, National Energy Technology Laboratory, (http://www.netl.doe.gov/). 44. Website, INSTITUT FÜR WERKSTOFFE UND VERFAHREN DER ENERGIETECHNIK, Forschungszentrum Jülich, (http://www.fzjuelich. de/portal/oea_iwv). - 144 - 45. Website, Center for Environmental and Energy Research at Alfred University, (http://ceer.alfred.edu/welcome.html). 46. Website, U.S. Department of Energy, (http://www.fossil.energy.gov/). 47. Website, SIEMENS, (http://www.powergeneration.siemens.com/en/fuelcells). 48. Website,晉豐興業有限公司, (http://www.techbank.com.tw/). 49. Website, 4Wave Inc., (http://www.4waveinc.com/ibd.html). 50. Y. Pan, J. H. Zhu, M. Z. Hu, and E. A. Payzant, “Processing of YSZ thin on dense and porous substrates” Surface & Coatings Technology, 200 (2005) 1242-1247. 51. Y. Y. Chen, and W. J. Wei, “Processing and characterization of ultrathin yttria-stabilized zirconia (YSZ) electrolytic films for SOFC”, Solid State Ionics, 177 (2006) 351-357. 52. Y. M. Chiang, D. Birnie III, and W. D. Kingery, Physical Ceramics, Ch2&Ch3, John Wiley & Sons, Inc., 1997. 53. 汪建民, 材料分析, 中國材料科學學會, Ch20,1998. 54. Website, Environmental Chemistry, (http://environmentalchemistry.com/yogi/periodic/ ). | |
| dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/30724 | - |
| dc.description.abstract | 封裝玻璃在燃料電池的單電池組中，扮演著一個重要的角色。製造一妥適性的封裝玻璃系統（compliant sealing glass），其玻璃轉換溫度需小於燃料電池操作溫度，在材料設計上可說是一大挑戰。因為要考慮到玻璃轉換溫度、材料熱膨脹係數、高溫導電性與化學穩定度。因此本研究主要分為兩部分，第一部份在討論以氧化物與合金當做靶材，使用離子束濺鍍法 (IBSD) 進行鍍膜，選擇Si (100) 晶圓與NiO/YSZ 燒結體作為基材，討論靶材對於薄膜的影響、薄膜成長機制與微結構的觀察。第二部份則為封裝玻璃的合成，選用Pb- 與Bi-Zn-Si-B 氧化物玻璃，透過熱處理了解其結晶行為與物理特性的變化。並與8Y-YSZ塊材和薄膜在600-650oC 進行接合，研究其界面反應；以SEM與TEM進行為結構分析，XRD進行結晶相分析。無鉛的Bi系玻璃因為結晶產生而導致熱膨脹係數變化，使得玻璃系統在長時間使用上呈現負面結果。最後依循玻璃封裝的實驗結果設計一玻璃適用性評分表，可對其他封裝玻璃系統進行一系列的評估。 | zh_TW |
| dc.description.abstract | A complient sealing glass-ceramic with the following properties is needed for the preparation of solid oxide fuel cell (SOFC), The design of the sealing material to have a glass transition temperature (Tg) slightly lower than operation temperature (To), good match of the coefficient of thermal expansion (CTE) with SOFC components, chemically inert at To, non-electrical conductive and good wetting for gas tight is tough and a great challenge in engineering aspects. This study included tow major subjects. One is used ion-beam sputtering deposition (IBSD), sputtered oxide or metal targets on various ZrO2 substrates, which included Si (100) wafer and porous NiO/YSZ composite disk. The other is preparation of two sealing glasses, Pb- and Bi-Zn-Si-B-oxides, and analyze the crystallization behaviors have been conducted. X-ray diffraction (XRD), scanning and transmission electron microscopy (SEM and TEM) with energy dispersive spectroscopy (EDS) were employed to study the best performance is contact with YSZ at 600-650oC for at least 10 hr, but the microstructural and phase evolution of the films and glasses. The results show that porous YSZ thin films with columnar crystalline structure on NiO/YSZ substrate or in amorphous state on Si wafer were observed. One Pb-free glass (B4 glass) has the microcracks induced by crystallization and CTE mismatch may play a negative role for the sealing. The discussion on the influence by different targets, substrates, phase transformation. Electric conductivity will be discussed. | en |
| dc.description.provenance | Made available in DSpace on 2021-06-13T02:13:33Z (GMT). No. of bitstreams: 1 ntu-96-R93527005-1.pdf: 11593212 bytes, checksum: dcc1ba1e87e26f961eb65303b62c8d2b (MD5) Previous issue date: 2007 | en |
| dc.description.tableofcontents | Chapter 1 Introduction .................................................................- 1 -
1.1 Objectives of This Research..............................................................- 2 - Chapter 2 Literature Survey .........................................................- 5 - 2.1. Thin Electrolyte Films......................................................................- 5 - 2.1.1 Synthesis Methods ......................................................................- 5 - 2.1.2. Developments of Thin Electrolyte Film ..................................- 10 - 2.2 The Sealing Glass............................................................................- 13 - 2.2.1 Rules of Sealing Glass in SOFC...............................................- 13 - 2.2.2 Function Requirement for SOFC..............................................- 16 - 2.2.3 Characteristics of Sealing Glass ...............................................- 20 - 2.2.4 Effect Coefficient of Thermal Expansion (CTE) of the Sealing Glass...................................................................................................- 22 - 2.2.5 Electrical Resistance of Sealing Glass......................................- 32 - 2.2.6 Chemical Stability under Operation Conditions.......................- 37 - Chapter 3 Experimental Procedure..............................................- 42 - 3.1 Materials ..........................................................................................- 43 - 3.1.1 Materials for IBSD Method ......................................................- 43 - 3.1.2 Glass Selection for Sealing.......................................................- 43 - 3.2 Sample Preparation..........................................................................- 44 - 3.2.1 YSZ Thin Film for IBSD Method ............................................- 44 - 3.2.2 Glass Ceramics..........................................................................- 44 - 3.3 Characterization...............................................................................- 46 - 3.3.1 X-ray diffraction .......................................................................- 46 - 3.3.2 Thermal properties analysis ......................................................- 46 - 3.3.3 Microstructural and Elemental Analysis ..................................- 46 - VI 3.3.4 Electrical Properties..................................................................- 47 - 3.3.5 Density and Porosity.................................................................- 47 - Chapter 4 Results .......................................................................- 55 - 4.1 Formation of YSZ thin film by IBSD and analysis ........................- 55 - 4.1.1 Microstructure of Targets .........................................................- 55 - 4.1.2 Properties of Sputtered Films ...................................................- 55 - 4.1.3 TEM Observation Results.........................................................- 69 - 4.1.4 Microstructure of Films by Thermal Treatment .......................- 70 - 4.2 Thermal Properties and Interfacial Reaction of Pb-glass System...- 79 - 4.3 Bi2O3-ZnO-SiO2-B2O3 Oxide Glass System ...................................- 86 - 4.3.1 Thermal Properties of Bi2O3-glass System...............................- 86 - 4.3.2 Crystalline Phase Analysis in B4-glass System .......................- 87 - 4.3.3 Effect of 900oC Wetting Treatment ..........................................- 90 - 4.3.4 Ionic Conductivity of glass .......................................................- 91 - 4.4 The Interface Reaction of B4-glass/YSZ ......................................- 114 - 4.4.1 The Interface Reaction at Intermediate temperature ..............- 114 - 4.4.2 Interfacial Reaction of High Temperature Wetting Sample...- 116 - 4.4.3 Interfacial Reaction of B4-glass and YSZ Thin Film.............- 117 - Chapter 5 Discussions ...............................................................- 126 - 5.1 Methods of Sealing Materials Selection .......................................- 126 - 5.2 Composition ..................................................................................- 126 - 5.3 Thermal Properties ........................................................................- 127 - 5.4 Crystalline Phases and Crystallization ..........................................- 128 - 5.5 Interfacial Reactions......................................................................- 128 - 5.6 Interfacial Diffusion Analysis .......................................................- 130 - 5.7 Electrical Conductivity..................................................................- 131 - VII Chapter 6 Conclusions ..............................................................- 135 - Chapter 7 Future work .............................................................- 138 - Reference .................................................................................- 139 - Appendix..................................................................................- 145 - | |
| dc.language.iso | en | |
| dc.subject | 封裝玻璃 | zh_TW |
| dc.subject | 薄膜 | zh_TW |
| dc.subject | 燃料 | zh_TW |
| dc.subject | 無鉛玻璃 | zh_TW |
| dc.subject | 相變化 | zh_TW |
| dc.subject | Bi-Zn-Si-B 氧化物玻璃 | zh_TW |
| dc.subject | 電池 | zh_TW |
| dc.subject | Pb-free | en |
| dc.subject | glass ceramics | en |
| dc.subject | SOFC | en |
| dc.subject | thin film | en |
| dc.subject | sealing glass | en |
| dc.title | 固態氧化物燃料電池之氣相法薄膜合成與鉍系封裝玻璃/氧化鋯之介面接合反應 | zh_TW |
| dc.title | nvestigation of Vapor Phase Thin Film Deposition and Interfacial Reaction in Bismuth Oxide Glass/YSZ System | en |
| dc.type | Thesis | |
| dc.date.schoolyear | 95-2 | |
| dc.description.degree | 碩士 | |
| dc.contributor.oralexamcommittee | 黃坤祥,謝宗霖,林新智 | |
| dc.subject.keyword | 燃料,電池,薄膜,封裝玻璃,無鉛玻璃,Bi-Zn-Si-B 氧化物玻璃,相變化, | zh_TW |
| dc.subject.keyword | SOFC,thin film,sealing glass,Pb-free,glass ceramics, | en |
| dc.relation.page | 148 | |
| dc.rights.note | 有償授權 | |
| dc.date.accepted | 2007-06-05 | |
| dc.contributor.author-college | 工學院 | zh_TW |
| dc.contributor.author-dept | 材料科學與工程學研究所 | zh_TW |
| 顯示於系所單位： | 材料科學與工程學系 | |
文件中的檔案：
| 檔案 | 大小 | 格式 | |
|---|---|---|---|
| ntu-96-1.pdf 未授權公開取用 | 11.32 MB | Adobe PDF |
系統中的文件，除了特別指名其著作權條款之外，均受到著作權保護，並且保留所有的權利。