請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/22171
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 陳建彰 | |
dc.contributor.author | Jui-Hsuan Tsai | en |
dc.contributor.author | 蔡睿軒 | zh_TW |
dc.date.accessioned | 2021-06-08T04:06:23Z | - |
dc.date.copyright | 2018-08-02 | |
dc.date.issued | 2018 | |
dc.date.submitted | 2018-07-26 | |
dc.identifier.citation | [1] D. M. Chapin, C. Fuller, and G. Pearson, 'A new silicon p‐n junction photocell for converting solar radiation into electrical power,' Journal of Applied Physics, vol. 25, no. 5, pp. 676-677, 1954. [2] J.-P. Correa-Baena et al., 'The rapid evolution of highly efficient perovskite solar cells,' Energy Environmental Science, vol. 10, no. 3, pp. 710-727, 2017. [3] A. Kojima, K. Teshima, Y. Shirai, and T. Miyasaka, 'Organometal halide perovskites as visible-light sensitizers for photovoltaic cells,' Journal of the American Chemical Society, vol. 131, no. 17, pp. 6050-6051, 2009. [4] W. S. Yang et al., 'Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells,' Science, vol. 356, no. 6345, pp. 1376-1379, 2017. [5] L. Meng, J. You, T.-F. Guo, and Y. Yang, 'Recent advances in the inverted planar structure of perovskite solar cells,' Accounts of chemical research, vol. 49, no. 1, pp. 155-165, 2015. [6] T. Liu, K. Chen, Q. Hu, R. Zhu, and Q. Gong, 'Inverted perovskite solar cells: progresses and perspectives,' Advanced Energy Materials, vol. 6, no. 17, 2016. [7] W. v. Siemens, 'Ueber die elektrostatische Induction und die Verzögerung des Stroms in Flaschendrähten,' Annalen der Physik, vol. 178, no. 9, pp. 66-122, 1857. [8] R. Brandenburg, 'Dielectric barrier discharges: progress on plasma sources and on the understanding of regimes and single filaments,' Plasma Sources Science and Technology, vol. 26, no. 5, p. 053001, 2017. [9] A. Ananth and Y. S. Mok, 'Synthesis of RuO2 nanomaterials under dielectric barrier discharge plasma at atmospheric pressure–Influence of substrates on the morphology and application,' Chemical Engineering Journal, vol. 239, pp. 290-298, 2014. [10] N. Kramer, E. Aydil, and U. Kortshagen, 'Requirements for plasma synthesis of nanocrystals at atmospheric pressures,' Journal of Physics D: Applied Physics, vol. 48, no. 3, p. 035205, 2015. [11] J. Patel, L. Němcová, P. Maguire, W. Graham, and D. Mariotti, 'Synthesis of surfactant-free electrostatically stabilized gold nanoparticles by plasma-induced liquid chemistry,' Nanotechnology, vol. 24, no. 24, p. 245604, 2013. [12] H. Jung et al., 'Functionalization of nanomaterials by non-thermal large area atmospheric pressure plasmas: application to flexible dye-sensitized solar cells,' Nanoscale, vol. 5, no. 17, pp. 7825-7830, 2013. [13] N.-Y. Cui and N. M. Brown, 'Modification of the surface properties of a polypropylene (PP) film using an air dielectric barrier discharge plasma,' Applied surface science, vol. 189, no. 1-2, pp. 31-38, 2002. [14] M. Noeske, J. Degenhardt, S. Strudthoff, and U. Lommatzsch, 'Plasma jet treatment of five polymers at atmospheric pressure: surface modifications and the relevance for adhesion,' International journal of adhesion and adhesives, vol. 24, no. 2, pp. 171-177, 2004. [15] I. Motrescu and M. Nagatsu, 'Nanocapillary atmospheric pressure plasma jet: a tool for ultrafine maskless surface modification at atmospheric pressure,' ACS applied materials interfaces, vol. 8, no. 19, pp. 12528-12533, 2016. [16] M.-H. Chiang et al., 'Effects of oxygen addition and treating distance on surface cleaning of ITO glass by a non-equilibrium nitrogen atmospheric-pressure plasma jet,' Plasma Chemistry and Plasma Processing, vol. 30, no. 5, pp. 553-563, 2010. [17] T. Homola et al., 'Atmospheric pressure diffuse plasma in ambient air for ITO surface cleaning,' Applied Surface Science, vol. 258, no. 18, pp. 7135-7139, 2012. [18] T. Homola, J. Matoušek, M. Kormunda, L. Y. Wu, and M. Černák, 'Plasma treatment of glass surfaces using diffuse coplanar surface barrier discharge in ambient air,' Plasma Chemistry and Plasma Processing, vol. 33, no. 5, pp. 881-894, 2013. [19] G. Park et al., 'Atmospheric-pressure plasma sources for biomedical applications,' Plasma Sources Science and Technology, vol. 21, no. 4, p. 043001, 2012. [20] J.-O. Jo, S. D. Kim, H.-J. Lee, and Y. S. Mok, 'Decomposition of taste-and-odor compounds produced by cyanobacteria algae using atmospheric pressure plasma created inside a porous hydrophobic ceramic tube,' Chemical Engineering Journal, vol. 247, pp. 291-301, 2014. [21] J. Shen et al., 'Sterilization of Bacillus subtilis spores using an atmospheric plasma jet with argon and oxygen mixture gas,' Applied Physics Express, vol. 5, no. 3, p. 036201, 2012. [22] K. P. Arjunan, V. K. Sharma, and S. Ptasinska, 'Effects of atmospheric pressure plasmas on isolated and cellular DNA—a review,' International journal of molecular sciences, vol. 16, no. 2, pp. 2971-3016, 2015. [23] B. Surowsky, O. Schlüter, and D. Knorr, 'Interactions of non-thermal atmospheric pressure plasma with solid and liquid food systems: a review,' Food Engineering Reviews, vol. 7, no. 2, pp. 82-108, 2015. [24] Q. Chen et al., 'Planar heterojunction perovskite solar cells via vapor-assisted solution process,' Journal of the American Chemical Society, vol. 136, no. 2, pp. 622-625, 2013. [25] F. Huang et al., 'Gas-assisted preparation of lead iodide perovskite films consisting of a monolayer of single crystalline grains for high efficiency planar solar cells,' Nano Energy, vol. 10, pp. 10-18, 2014. [26] X. Li et al., 'A vacuum flash–assisted solution process for high-efficiency large-area perovskite solar cells,' Science, p. aaf8060, 2016. [27] B. O'regan and M. Grätzel, 'A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films,' nature, vol. 353, no. 6346, p. 737, 1991. [28] M. A. Green, 'Australian Photovoltaics Research and Development,' ACS Energy Letters, vol. 1, no. 3, pp. 516-520, 2016. [29] M. G. Villalva, J. R. Gazoli, and E. Ruppert Filho, 'Comprehensive approach to modeling and simulation of photovoltaic arrays,' IEEE Transactions on power electronics, vol. 24, no. 5, pp. 1198-1208, 2009. [30] H. Kim, K.-G. Lim, and T.-W. Lee, 'Planar heterojunction organometal halide perovskite solar cells: roles of interfacial layers,' Energy Environmental Science, vol. 9, no. 1, pp. 12-30, 2016. [31] G. Niu, W. Li, J. Li, X. Liang, and L. Wang, 'Enhancement of thermal stability for perovskite solar cells through cesium doping,' RSC Advances, vol. 7, no. 28, pp. 17473-17479, 2017. [32] Y. Li et al., 'Light-induced degradation of CH3NH3PbI3 hybrid perovskite thin film,' The Journal of Physical Chemistry C, vol. 121, no. 7, pp. 3904-3910, 2017. [33] Y. Han et al., 'Degradation observations of encapsulated planar CH 3 NH 3 PbI 3 perovskite solar cells at high temperatures and humidity,' Journal of Materials Chemistry A, vol. 3, no. 15, pp. 8139-8147, 2015. [34] Y. Jiao et al., 'Graphene-covered perovskites: an effective strategy to enhance light absorption and resist moisture degradation,' Rsc Advances, vol. 5, no. 100, pp. 82346-82350, 2015. [35] W.-J. Yin, J.-H. Yang, J. Kang, Y. Yan, and S.-H. Wei, 'Halide perovskite materials for solar cells: a theoretical review,' Journal of Materials Chemistry A, vol. 3, no. 17, pp. 8926-8942, 2015. [36] J.-H. Im, C.-R. Lee, J.-W. Lee, S.-W. Park, and N.-G. Park, '6.5% efficient perovskite quantum-dot-sensitized solar cell,' Nanoscale, vol. 3, no. 10, pp. 4088-4093, 2011. [37] H.-S. Kim et al., 'Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%,' Scientific reports, vol. 2, p. 591, 2012. [38] M. M. Lee, J. Teuscher, T. Miyasaka, T. N. Murakami, and H. J. Snaith, 'Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites,' Science, p. 1228604, 2012. [39] J. M. Ball, M. M. Lee, A. Hey, and H. J. Snaith, 'Low-temperature processed meso-superstructured to thin-film perovskite solar cells,' Energy Environmental Science, vol. 6, no. 6, pp. 1739-1743, 2013. [40] S. Guarnera et al., 'Improving the long-term stability of perovskite solar cells with a porous Al2O3 buffer layer,' The journal of physical chemistry letters, vol. 6, no. 3, pp. 432-437, 2015. [41] G. Xing et al., 'Long-range balanced electron-and hole-transport lengths in organic-inorganic CH3NH3PbI3,' Science, vol. 342, no. 6156, pp. 344-347, 2013. [42] S. D. Stranks et al., 'Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber,' Science, vol. 342, no. 6156, pp. 341-344, 2013. [43] M. Liu, M. B. Johnston, and H. J. Snaith, 'Efficient planar heterojunction perovskite solar cells by vapour deposition,' Nature, vol. 501, no. 7467, p. 395, 2013. [44] H. Zhou et al., 'Interface engineering of highly efficient perovskite solar cells,' Science, vol. 345, no. 6196, pp. 542-546, 2014. [45] H. Tan et al., 'Efficient and stable solution-processed planar perovskite solar cells via contact passivation,' Science, vol. 355, no. 6326, pp. 722-726, 2017. [46] G. E. Eperon, S. D. Stranks, C. Menelaou, M. B. Johnston, L. M. Herz, and H. J. Snaith, 'Formamidinium lead trihalide: a broadly tunable perovskite for efficient planar heterojunction solar cells,' Energy Environmental Science, vol. 7, no. 3, pp. 982-988, 2014. [47] J. Y. Jeng et al., 'CH3NH3PbI3 perovskite/fullerene planar‐heterojunction hybrid solar cells,' Advanced Materials, vol. 25, no. 27, pp. 3727-3732, 2013. [48] J. You et al., 'Low-temperature solution-processed perovskite solar cells with high efficiency and flexibility,' 2014. [49] P. Docampo, J. M. Ball, M. Darwich, G. E. Eperon, and H. J. Snaith, 'Efficient organometal trihalide perovskite planar-heterojunction solar cells on flexible polymer substrates,' Nature communications, vol. 4, p. 2761, 2013. [50] Z. Xiao et al., 'Efficient, high yield perovskite photovoltaic devices grown by interdiffusion of solution-processed precursor stacking layers,' Energy Environmental Science, vol. 7, no. 8, pp. 2619-2623, 2014. [51] J. You et al., 'Moisture assisted perovskite film growth for high performance solar cells,' Applied Physics Letters, vol. 105, no. 18, p. 183902, 2014. [52] F. Xie et al., 'Vertical recrystallization for highly efficient and stable formamidinium-based inverted-structure perovskite solar cells,' Energy Environmental Science, vol. 10, no. 9, pp. 1942-1949, 2017. [53] L. Zhao et al., 'High‐Performance Inverted Planar Heterojunction Perovskite Solar Cells Based on Lead Acetate Precursor with Efficiency Exceeding 18%,' Advanced Functional Materials, vol. 26, no. 20, pp. 3508-3514, 2016. [54] S. Ito et al., 'Fabrication of screen‐printing pastes from TiO2 powders for dye‐sensitised solar cells,' Progress in photovoltaics: research and applications, vol. 15, no. 7, pp. 603-612, 2007. [55] J. Kroon et al., 'Nanocrystalline dye‐sensitized solar cells having maximum performance,' Progress in Photovoltaics: Research and Applications, vol. 15, no. 1, pp. 1-18, 2007. [56] J. Gong, J. Liang, and K. Sumathy, 'Review on dye-sensitized solar cells (DSSCs): fundamental concepts and novel materials,' Renewable and Sustainable Energy Reviews, vol. 16, no. 8, pp. 5848-5860, 2012. [57] G. Niu, X. Guo, and L. Wang, 'Review of recent progress in chemical stability of perovskite solar cells,' Journal of Materials Chemistry A, vol. 3, no. 17, pp. 8970-8980, 2015. [58] M. Grätzel, 'The light and shade of perovskite solar cells,' Nature materials, vol. 13, no. 9, p. 838, 2014. [59] M. A. Green, A. Ho-Baillie, and H. J. Snaith, 'The emergence of perovskite solar cells,' Nature Photonics, vol. 8, no. 7, p. nphoton. 2014.134, 2014. [60] T. Fukano and T. Motohiro, 'Low-temperature growth of highly crystallized transparent conductive fluorine-doped tin oxide films by intermittent spray pyrolysis deposition,' Solar energy materials and solar cells, vol. 82, no. 4, pp. 567-575, 2004. [61] D. Wöhrle and D. Meissner, 'Organic solar cells,' Advanced Materials, vol. 3, no. 3, pp. 129-138, 1991. [62] H. Hoppe and N. S. Sariciftci, 'Organic solar cells: An overview,' Journal of materials research, vol. 19, no. 7, pp. 1924-1945, 2004. [63] F. C. Krebs, 'Fabrication and processing of polymer solar cells: a review of printing and coating techniques,' Solar energy materials and solar cells, vol. 93, no. 4, pp. 394-412, 2009. [64] S. Günes, H. Neugebauer, and N. S. Sariciftci, 'Conjugated polymer-based organic solar cells,' Chemical reviews, vol. 107, no. 4, pp. 1324-1338, 2007. [65] Q. Wang, Y. Shao, Q. Dong, Z. Xiao, Y. Yuan, and J. Huang, 'Large fill-factor bilayer iodine perovskite solar cells fabricated by a low-temperature solution-process,' Energy Environmental Science, vol. 7, no. 7, pp. 2359-2365, 2014. [66] D. Liu and T. L. Kelly, 'Perovskite solar cells with a planar heterojunction structure prepared using room-temperature solution processing techniques,' Nature photonics, vol. 8, no. 2, p. 133, 2014. [67] U. Diebold, 'The surface science of titanium dioxide,' Surface science reports, vol. 48, no. 5-8, pp. 53-229, 2003. [68] B. Conings et al., 'An easy-to-fabricate low-temperature TiO2 electron collection layer for high efficiency planar heterojunction perovskite solar cells,' APL Materials, vol. 2, no. 8, p. 081505, 2014. [69] J. T.-W. Wang et al., 'Low-temperature processed electron collection layers of graphene/TiO2 nanocomposites in thin film perovskite solar cells,' Nano letters, vol. 14, no. 2, pp. 724-730, 2013. [70] W. Ke et al., 'Low-temperature solution-processed tin oxide as an alternative electron transporting layer for efficient perovskite solar cells,' Journal of the American Chemical Society, vol. 137, no. 21, pp. 6730-6733, 2015. [71] T. Erb et al., 'Correlation between structural and optical properties of composite polymer/fullerene films for organic solar cells,' Advanced Functional Materials, vol. 15, no. 7, pp. 1193-1196, 2005. [72] G. Perrier, R. de Bettignies, S. Berson, N. Lemaître, and S. Guillerez, 'Impedance spectrometry of optimized standard and inverted P3HT-PCBM organic solar cells,' Solar Energy Materials and Solar Cells, vol. 101, pp. 210-216, 2012. [73] S. E. Shaheen, C. J. Brabec, N. S. Sariciftci, F. Padinger, T. Fromherz, and J. C. Hummelen, '2.5% efficient organic plastic solar cells,' Applied Physics Letters, vol. 78, no. 6, pp. 841-843, 2001. [74] Y. Li et al., 'Multifunctional fullerene derivative for interface engineering in perovskite solar cells,' Journal of the American Chemical Society, vol. 137, no. 49, pp. 15540-15547, 2015. [75] J. Xu et al., 'Perovskite–fullerene hybrid materials suppress hysteresis in planar diodes,' Nature communications, vol. 6, p. 7081, 2015. [76] Y. Shao, Z. Xiao, C. Bi, Y. Yuan, and J. Huang, 'Origin and elimination of photocurrent hysteresis by fullerene passivation in CH 3 NH 3 PbI 3 planar heterojunction solar cells,' Nature communications, vol. 5, p. 5784, 2014. [77] C. Tian, K. Kochiss, E. Castro, G. Betancourt-Solis, H. Han, and L. Echegoyen, 'A dimeric fullerene derivative for efficient inverted planar perovskite solar cells with improved stability,' Journal of Materials Chemistry A, vol. 5, no. 16, pp. 7326-7332, 2017. [78] D.-X. Yuan et al., 'A solution-processed bathocuproine cathode interfacial layer for high-performance bromine–iodine perovskite solar cells,' Physical Chemistry Chemical Physics, vol. 17, no. 40, pp. 26653-26658, 2015. [79] J. Ciro et al., 'Optimization of the Ag/PCBM interface by a rhodamine interlayer to enhance the efficiency and stability of perovskite solar cells,' Nanoscale, vol. 9, no. 27, pp. 9440-9446, 2017. [80] I. Hill and A. Kahn, 'Organic semiconductor heterointerfaces containing bathocuproine,' Journal of Applied Physics, vol. 86, no. 8, pp. 4515-4519, 1999. [81] D. Bi, L. Yang, G. Boschloo, A. Hagfeldt, and E. M. Johansson, 'Effect of different hole transport materials on recombination in CH3NH3PbI3 perovskite-sensitized mesoscopic solar cells,' The Journal of Physical Chemistry Letters, vol. 4, no. 9, pp. 1532-1536, 2013. [82] W. H. Nguyen, C. D. Bailie, E. L. Unger, and M. D. McGehee, 'Enhancing the hole-conductivity of spiro-OMeTAD without oxygen or lithium salts by using spiro (TFSI) 2 in perovskite and dye-sensitized solar cells,' Journal of the American Chemical Society, vol. 136, no. 31, pp. 10996-11001, 2014. [83] J. H. Noh, S. H. Im, J. H. Heo, T. N. Mandal, and S. I. Seok, 'Chemical management for colorful, efficient, and stable inorganic–organic hybrid nanostructured solar cells,' Nano letters, vol. 13, no. 4, pp. 1764-1769, 2013. [84] L. Zheng et al., 'A hydrophobic hole transporting oligothiophene for planar perovskite solar cells with improved stability,' Chemical communications, vol. 50, no. 76, pp. 11196-11199, 2014. [85] L. Yang et al., 'Comparing spiro-OMeTAD and P3HT hole conductors in efficient solid state dye-sensitized solar cells,' Physical Chemistry Chemical Physics, vol. 14, no. 2, pp. 779-789, 2012. [86] J. Ouyang, C. W. Chu, F. C. Chen, Q. Xu, and Y. Yang, 'High‐conductivity poly (3, 4‐ethylenedioxythiophene): poly (styrene sulfonate) film and its application in polymer optoelectronic devices,' Advanced Functional Materials, vol. 15, no. 2, pp. 203-208, 2005. [87] J. Saghaei, A. Fallahzadeh, and T. Saghaei, 'ITO-free organic solar cells using highly conductive phenol-treated PEDOT: PSS anodes,' Organic Electronics, vol. 24, pp. 188-194, 2015. [88] A. Fallahzadeh, J. Saghaei, and M. H. Yousefi, 'Effect of alcohol vapor treatment on electrical and optical properties of poly (3, 4-ethylene dioxythiophene): poly (styrene sulfonate) films for indium tin oxide-free organic light-emitting diodes,' Applied Surface Science, vol. 320, pp. 895-900, 2014. [89] J. Saghaei, A. Fallahzadeh, and M. H. Yousefi, 'Improvement of electrical conductivity of PEDOT: PSS films by 2-Methylimidazole post treatment,' Organic Electronics, vol. 19, pp. 70-75, 2015. [90] S. Timpanaro, M. Kemerink, F. Touwslager, M. De Kok, and S. Schrader, 'Morphology and conductivity of PEDOT/PSS films studied by scanning–tunneling microscopy,' Chemical Physics Letters, vol. 394, no. 4-6, pp. 339-343, 2004. [91] B. Eliasson and U. Kogelschatz, 'Nonequilibrium volume plasma chemical processing,' IEEE transactions on plasma science, vol. 19, no. 6, pp. 1063-1077, 1991. [92] A. Schutze, J. Y. Jeong, S. E. Babayan, J. Park, G. S. Selwyn, and R. F. Hicks, 'The atmospheric-pressure plasma jet: a review and comparison to other plasma sources,' IEEE transactions on plasma science, vol. 26, no. 6, pp. 1685-1694, 1998. [93] M. Laroussi and T. Akan, 'Arc‐free atmospheric pressure cold plasma jets: a review,' Plasma Processes and Polymers, vol. 4, no. 9, pp. 777-788, 2007. [94] A. C. Bose, Y. Shimizu, D. Mariotti, T. Sasaki, K. Terashima, and N. Koshizaki, 'Flow rate effect on the structure and morphology of molybdenum oxide nanoparticles deposited by atmospheric-pressure microplasma processing,' Nanotechnology, vol. 17, no. 24, p. 5976, 2006. [95] S. Babayan et al., 'Deposition of silicon dioxide films with a non-equilibrium atmospheric-pressure plasma jet,' Plasma Sources Science and Technology, vol. 10, no. 4, p. 573, 2001. [96] T.-J. Wu, C.-Y. Chou, C.-M. Hsu, C.-C. Hsu, J.-Z. Chen, and I.-C. Cheng, 'Ultrafast synthesis of continuous Au thin films from chloroauric acid solution using an atmospheric pressure plasma jet,' Rsc Advances, vol. 5, no. 121, pp. 99654-99657, 2015. [97] S. Chen et al., 'Surface modification of epoxy resin using He/CF4 atmospheric pressure plasma jet for flashover withstanding characteristics improvement in vacuum,' Applied Surface Science, vol. 414, pp. 107-113, 2017. [98] J. Muñoz, J. Bravo, and M. Calzada, 'Aluminum metal surface cleaning and activation by atmospheric-pressure remote plasma,' Applied Surface Science, vol. 407, pp. 72-81, 2017. [99] F.-H. Kuok, C.-Y. Liao, T.-H. Wan, P.-W. Yeh, I.-C. Cheng, and J.-Z. Chen, 'Atmospheric pressure plasma jet processed reduced graphene oxides for supercapacitor application,' Journal of Alloys and Compounds, vol. 692, pp. 558-562, 2017. [100] F.-H. Kuok et al., 'Application of atmospheric-pressure plasma jet processed carbon nanotubes to liquid and quasi-solid-state gel electrolyte supercapacitors,' Applied Surface Science, vol. 425, pp. 321-328, 2017. [101] L. Liu, D. Ye, Y. Yu, L. Liu, and Y. Wu, 'Carbon-based flexible micro-supercapacitor fabrication via mask-free ambient micro-plasma-jet etching,' Carbon, vol. 111, pp. 121-127, 2017. [102] T. Yuji and Y.-M. Sung, 'Surface Treatment of TiO2 Films by 4kHz Pulse Plasma for Dye-Sensized Solar Cells Applications,' in Discharges and Electrical Insulation in Vacuum, 2006. ISDEIV'06. International Symposium on, 2006, vol. 2, pp. 801-804: IEEE. [103] S. Zen, Y. Teramoto, R. Ono, and T. Oda, 'Development of low-temperature sintering technique for dye-sensitized solar cells combined with dielectric barrier discharge treatment,' Japanese Journal of Applied Physics, vol. 51, no. 5R, p. 056201, 2012. [104] V.-D. Dao, L. L. Larina, and H.-S. Choi, 'Minimizing energy losses in perovskite solar cells using plasma-treated transparent conducting layers,' Thin Solid Films, vol. 593, pp. 10-16, 2015. [105] K. Wang et al., 'CO2 Plasma-Treated TiO2 Film as an Effective Electron Transport Layer for High-Performance Planar Perovskite Solar Cells,' ACS applied materials interfaces, vol. 9, no. 39, pp. 33989-33996, 2017. [106] B. Vaagensmith et al., 'Environmentally Friendly Plasma-Treated PEDOT: PSS as Electrodes for ITO-Free Perovskite Solar Cells,' ACS applied materials interfaces, vol. 9, no. 41, pp. 35861-35870, 2017. [107] X. Xiao et al., 'Argon Plasma Treatment to Tune Perovskite Surface Composition for High Efficiency Solar Cells and Fast Photodetectors,' Advanced Materials, 2018. [108] U. Reitz, J. Salge, and R. Schwarz, 'Pulsed barrier discharges for thin film production at atmospheric pressure,' Surface and Coatings Technology, vol. 59, no. 1-3, pp. 144-147, 1993. [109] J.-H. Tsai, I.-C. Cheng, C.-C. Hsu, and J.-Z. Chen, 'DC-pulse atmospheric-pressure plasma jet and dielectric barrier discharge surface treatments on fluorine-doped tin oxide for perovskite solar cell application,' Journal of Physics D: Applied Physics, vol. 51, no. 2, p. 025502, 2017. [110] D. Liu, J. Niu, and N. Yu, 'Optical emission characteristics of medium-to high-pressure N2 dielectric barrier discharge plasmas during surface modification of polymers,' Journal of Vacuum Science Technology A: Vacuum, Surfaces, and Films, vol. 29, no. 6, p. 061506, 2011. [111] C.-c. Hsu, C.-y. Wu, C.-w. Chen, and W.-c. Cheng, 'Mode transition of an atmospheric pressure arc plasma jet sustained by pulsed DC power,' Japanese Journal of Applied Physics, vol. 48, no. 7R, p. 076002, 2009. [112] N. Gherardi, G. Gouda, E. Gat, A. Ricard, and F. Massines, 'Transition from glow silent discharge to micro-discharges in nitrogen gas,' Plasma Sources Science and Technology, vol. 9, no. 3, p. 340, 2000. [113] Y. Sakiyama, D. B. Graves, H.-W. Chang, T. Shimizu, and G. E. Morfill, 'Plasma chemistry model of surface microdischarge in humid air and dynamics of reactive neutral species,' Journal of Physics D: Applied Physics, vol. 45, no. 42, p. 425201, 2012. [114] J. Jeong et al., 'Etching polyimide with a nonequilibrium atmospheric-pressure plasma jet,' Journal of Vacuum Science Technology A: Vacuum, Surfaces, and Films, vol. 17, no. 5, pp. 2581-2585, 1999. [115] J. Jeong et al., 'Etching materials with an atmospheric-pressure plasma jet,' Plasma Sources Science and Technology, vol. 7, no. 3, p. 282, 1998. [116] H. Chang et al., 'Dye-sensitized solar cells with nanoporous TiO2 photoanodes sintered by N2 and air atmospheric pressure plasma jets with/without air-quenching,' Journal of Power Sources, vol. 251, pp. 215-221, 2014. [117] H. Chang, Y.-J. Yang, H.-C. Li, C.-C. Hsu, I.-C. Cheng, and J.-Z. Chen, 'Preparation of nanoporous TiO2 films for DSSC application by a rapid atmospheric pressure plasma jet sintering process,' Journal of Power Sources, vol. 234, pp. 16-22, 2013. [118] J.-Z. Chen, C. Wang, C.-C. Hsu, and I.-C. Cheng, 'Ultrafast synthesis of carbon-nanotube counter electrodes for dye-sensitized solar cells using an atmospheric-pressure plasma jet,' Carbon, vol. 98, pp. 34-40, 2016. [119] L. Ge et al., 'Trisodium citrate assisted synthesis of ZnO hollow spheres via a facile precipitation route and their application as gas sensor,' Journal of Materials Chemistry, vol. 21, no. 29, pp. 10750-10754, 2011. [120] J. H. Park, D. J. Byun, and J. K. Lee, 'Electrical and optical properties of fluorine-doped tin oxide (SnOx: F) thin films deposited on PET by using ECR–MOCVD,' Journal of electroceramics, vol. 23, no. 2-4, p. 506, 2009. [121] H.-W. Liu et al., 'Rapid atmospheric pressure plasma jet processed reduced graphene oxide counter electrodes for dye-sensitized solar cells,' ACS applied materials interfaces, vol. 6, no. 17, pp. 15105-15112, 2014. [122] D. Huang et al., 'Perovskite solar cells with a DMSO-treated PEDOT: PSS hole transport layer exhibit higher photovoltaic performance and enhanced durability,' Nanoscale, vol. 9, no. 12, pp. 4236-4243, 2017. [123] S. Ryu et al., 'Voltage output of efficient perovskite solar cells with high open-circuit voltage and fill factor,' Energy Environmental Science, vol. 7, no. 8, pp. 2614-2618, 2014. [124] W. Yan et al., 'High-performance hybrid perovskite solar cells with open circuit voltage dependence on hole-transporting materials,' Nano Energy, vol. 16, pp. 428-437, 2015. [125] B. Suarez, V. Gonzalez-Pedro, T. S. Ripolles, R. S. Sanchez, L. Otero, and I. Mora-Sero, 'Recombination study of combined halides (Cl, Br, I) perovskite solar cells,' The journal of physical chemistry letters, vol. 5, no. 10, pp. 1628-1635, 2014. [126] J. A. Christians, R. C. Fung, and P. V. Kamat, 'An inorganic hole conductor for organo-lead halide perovskite solar cells. Improved hole conductivity with copper iodide,' Journal of the American Chemical Society, vol. 136, no. 2, pp. 758-764, 2013. [127] D. Liu, M. K. Gangishetty, and T. L. Kelly, 'Effect of CH 3 NH 3 PbI 3 thickness on device efficiency in planar heterojunction perovskite solar cells,' Journal of Materials Chemistry A, vol. 2, no. 46, pp. 19873-19881, 2014. [128] Q. Lin, A. Armin, R. C. R. Nagiri, P. L. Burn, and P. Meredith, 'Electro-optics of perovskite solar cells,' Nature Photonics, vol. 9, no. 2, p. 106, 2015. [129] J. H. Kim et al., 'High‐performance and environmentally stable planar heterojunction perovskite solar cells based on a solution‐processed copper‐doped nickel oxide hole‐transporting layer,' Advanced Materials, vol. 27, no. 4, pp. 695-701, 2015. [130] J.-H. Im, I.-H. Jang, N. Pellet, M. Grätzel, and N.-G. Park, 'Growth of CH3NH3PbI3 cuboids with controlled size for high-efficiency perovskite solar cells,' Nature nanotechnology, vol. 9, no. 11, pp. 927-932, 2014. [131] Y.-L. Huang et al., 'Self-assembly of graphene onto electrospun polyamide 66 nanofibers as transparent conductive thin films,' Nanotechnology, vol. 22, no. 47, p. 475603, 2011. [132] S. M. Jain et al., 'Vapor phase conversion of PbI 2 to CH 3 NH 3 PbI 3: spectroscopic evidence for formation of an intermediate phase,' Journal of Materials Chemistry A, vol. 4, no. 7, pp. 2630-2642, 2016. [133] C.-Y. Chang, W.-K. Huang, and Y.-C. Chang, 'Highly-efficient and long-term stable perovskite solar cells enabled by a cross-linkable n-doped hybrid cathode interfacial layer,' Chemistry of Materials, vol. 28, no. 17, pp. 6305-6312, 2016. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/22171 | - |
dc.description.abstract | 本研究導入可攜式常壓介電質放電(dielectric barrier discharge plasma, DBD)電漿於鈣鈦礦太陽能電池之製程中。研究中所使用的介電質放電電漿系統擁有可攜式與低溫之特性,可以全程於充滿氮氣之手套箱內操作,並透過WIFI模組和手套箱外的電腦做連接,進行水氧敏感材料的製程。本研究則應用於鈣鈦礦太陽能電池的材料改質。 本論文分為兩部分。第一部分為運用可攜式常壓介電質放電系統於參雜氟氧化錫透明導電基板之有機物污染物清除,並用於正規結構(regular structure)平面式鈣鈦礦太陽能電池。透過水接觸角與X射線能譜 (XPS) 分析可以得知,在經過電漿的處理過後,其表面的汙染物被去除,而使其形成一較親水之表面,進而增加後續製成薄膜之附著。在基板經由電漿清潔後,二氧化鈦以溶膠凝膠法旋轉塗佈於基板上,透過掃描式電子顯微鏡 (SEM) 影像可以觀察到,基板透過電漿處理過後,可以形成較為緻密之二氧化鈦薄膜,進而降低載子複合機率,因而增加太陽能電池的效率。 第二部分為使用可攜式常壓介電質放電電漿對鈣鈦礦 (CH3NH3PbI3, Perovskite) 薄膜進行處理,並製作成倒置結構(Inverted structure)平面式鈣鈦礦太陽能電池。由SEM俯視影像可以觀察到,鈣鈦礦之表面結晶顆粒大小隨著常壓介電質放電電漿之處理逐漸增加,較大的結晶顆粒可為電池帶來更好的開路電壓 (open circuit voltage, VOC) 與填充因子 (fill factor, FF),進而提升電池之轉換效率 (power conversion efficiency, PCE)。此外藉由X射線能譜 (XPS) 分析可以得知,常壓介電質放電電漿處理會將鈣鈦礦中的有機部分去除,留下富含鉛之表面,而其表面可以被富勒烯(Fullerene)或其衍生物更有效的保護,而降低載子複合機率,因此增加太陽能電池的效率。 常壓介電質放電電漿成功引進鈣鈦礦太陽能電池之製程中改善與提升電池之效率,在正規結構中,將效率最高提升至14.6%;在倒置結構中,效率最高提升至9.8%。在原本效率較低的太陽能電池,具有較顯著的改善效果,原因可能和低效能太陽能電池原本材料的缺陷密度較高有關。 | zh_TW |
dc.description.abstract | Portable atmospheric-pressure dielectric barrier discharge (DBD) plasma system is applied to the fabrication processes of the perovskite solar cells. The DBD system is used inside a nitrogen-filled glove box to process oxygen- and water vapor-sensitive materials. The optical emission spectrometer is equipped with a WIFI module to communicate with the computer outside the glove box. In this study, the DBD system is applied to the material modification the perovskite layer of the perovskite solar cell and to decontamination of the glass substrate. In the first part of this thesis, the DBD system is used to clean the organic contaminationon fluorine doped tin oxide (FTO) substrates prior to the fabrication of regular structure planar perovskite solar cells (PSCs). Water contact angle measurement and X-ray photoelectron spectroscopy (XPS)indicate that the surface contamination is eliminated, leading to improved hydrophilicity of the FTO substrates, which thereby improves the adhesion of the follow-up deposited film. The follow-up deposited TiO2 can form a more compact layer on the substrate with the DBD treatment; this suppresses the charge recombination and raise the power conversion efficiency (PCE) of the PSCs. In the second portion, the DBD system is operated to treat the CH3NH3PbI3 (perovskite) films for inverted structure planar PSCs. The perovskite crystallinity increases after DBD treatments to reduce recombination and to improve the PCE of the PSCs.In addition, the XPS results show that the DBD treatment might remove the organic component (CH3NH3I) of the perovskite and produce a lead-rich surface, which shows a self-passivation effect and has better interaction with the fullerene layer, leading to improved PCE of the PSCs. The portable atmospheric DBD plasma system is successfully introduced into the fabrication process of the PSCs.For the regular structure, the highest PCE achieved is 14.6%; for the inverted structure, the highest PCE achieved is 9.8%. | en |
dc.description.provenance | Made available in DSpace on 2021-06-08T04:06:23Z (GMT). No. of bitstreams: 1 ntu-107-R05543013-1.pdf: 6407068 bytes, checksum: aa1cd6d8754f5055805666e42877a027 (MD5) Previous issue date: 2018 | en |
dc.description.tableofcontents | 致謝 II 中文摘要 III Abstract V 圖目錄 XI 表目錄 XIV 第1章 1 1.1 前言 1 1.2 研究動機 2 1.3 論文大綱 3 第2章 5 2.1 太陽能電池 5 2.1.1 太陽能電池之發展 5 2.1.2 太陽能電池之特性參數 6 2.2 鈣鈦礦太陽能電池 10 2.2.1 鈣鈦礦太陽能電池之介紹 10 2.2.2 中孔性結構(mesoporous structure) 11 2.2.3 正規結構(n-i-p structure) 12 2.2.4 倒置結構(p-i-n structure) 13 2.3 鈣鈦礦太陽能電池各層材料 15 2.3.1 透明導電玻璃基板 15 2.3.2 電子傳輸層 16 2.3.3 電洞傳輸層 17 2.4 電漿 20 2.4.1 電漿簡介 20 2.4.2 電漿工作原理 21 2.4.3 常壓電漿 23 2.4.4 電漿於鈣鈦礦太陽能電池之應用 24 第3章 25 3.1 實驗材料與儀器 25 3.2 實驗架構 27 3.3 製程儀器 28 3.3.1 可攜式常壓介電質放電電漿系統 28 3.3.2 常壓噴射電漿系統 29 3.3.3 氮氣手套箱 31 3.3.4 旋轉塗佈機 32 3.3.5 電子束蒸鍍機 32 3.4 量測儀器 33 3.4.1 掃描式電子顯微鏡 33 3.4.2 X光子能譜儀 33 3.4.3 X光子繞射儀 34 3.4.4 太陽光模擬器 35 3.4.5 電化學阻抗分析儀 35 3.5 實驗一之實驗流程 37 3.5.1 FTO玻璃基板清洗 37 3.5.2 電漿處理FTO玻璃 37 3.5.3 二氧化鈦 38 3.5.4 鈣鈦礦 38 3.5.5 Spiro-MeOTAD 39 3.5.6 銀電極 39 3.6 實驗二之實驗流程 40 3.6.1 ITO玻璃基板清洗 40 3.6.2 PEDOT:PSS 40 3.6.3 鈣鈦礦 40 3.6.4 常壓介電質放電電漿處理鈣鈦礦薄膜 40 3.6.5 PC61BM 41 3.6.6 BCP 41 3.6.7 銀電極 41 第4章 43 4.1 實驗一 43 4.1.1 常壓電漿之溫度變化 43 4.1.2 常壓電漿之光放射光譜 44 4.1.3 FTO玻璃之導電性 47 4.1.4 FTO玻璃之表面親水性 48 4.1.5 FTO玻璃之表面化學型態 49 4.1.6 二氧化鈦於FTO上之表面型態 52 4.1.7 太陽能電池之電性 53 4.1.8 太陽能電池之電化學阻抗 56 4.2 實驗二 58 4.2.1 常壓介電質放電電漿之光放射光譜 58 4.2.2 鈣鈦礦之表面型態 59 4.2.3 鈣鈦礦之結晶性 61 4.2.4 鈣鈦礦之導電性 61 4.2.5 鈣鈦礦之表面化學型態 63 4.2.6 太陽能電池之電性 66 第5章 71 附錄A 73 A.1 摘要 73 A.2 實驗步驟 73 A.3 實驗結果 73 參考文獻 75 | |
dc.language.iso | zh-TW | |
dc.title | 可攜式常壓介電質放電電漿於鈣鈦礦太陽能電池製程之應用 | zh_TW |
dc.title | Application of portable atmospheric-pressure dielectric barrier discharge plasma to the fabrication process of perovskite solar cell | en |
dc.type | Thesis | |
dc.date.schoolyear | 106-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 陳奕君,羅世強,陳志軒 | |
dc.subject.keyword | 常壓噴射電漿,常壓介電質放電電漿,鈣鈦礦太陽能電池,表面處理, | zh_TW |
dc.subject.keyword | atmospheric-pressure plasma jet,atmospheric-pressure dielectric barrier discharge,perovskite solar cell,surface treatment, | en |
dc.relation.page | 85 | |
dc.identifier.doi | 10.6342/NTU201801909 | |
dc.rights.note | 未授權 | |
dc.date.accepted | 2018-07-26 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 應用力學研究所 | zh_TW |
顯示於系所單位: | 應用力學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-107-1.pdf 目前未授權公開取用 | 6.26 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。