請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/17362| 標題: | 浸沒與非浸沒透水性圓柱之受力及流場模擬研析 Numerical Investigation of Flows through Submerged and Non-Submerged Porous Cylinders and Their Acting Forces |
| 作者: | Shuo-Yan Gao 高碩彥 |
| 指導教授: | 張倉榮(Tsang-Jung Chang) |
| 共同指導教授: | 謝正義(Cheng-I Hsieh) |
| 關鍵字: | 透水性圓柱,體積分率法,標準k–ε紊流模式,孔隙介質流模式, porous cylinders,standard k-ε turbulent model,volume of fluid,porous media theory, |
| 出版年 : | 2013 |
| 學位: | 碩士 |
| 摘要: | 本研究以三維數值模式模擬水流流經透水性圓柱之流場,探討透水性圓柱於不同浸沒水深的流場特性及受力情形。模式中使用有限體積法離散控制方程式,並以標準k-ε紊流模式及體積分率法,模擬紊流流況及自由液面之變化情形。為了呈現水流受透水性圓柱之阻滯現象,孔隙介質流模式將引用於模擬當中。與水工模型試驗驗證後,發現模式與試驗結果有一致的趨勢,顯示本研究所選用的模式應用於研究流場具有足夠的精確度。
在單根透水性圓柱應用案例中,流況分為浸沒及非浸沒等五組不同平均水位,且採用五種不同孔隙率。非浸沒流況下,圓柱受力與平均水位成正比關係;浸沒流況下,圓柱受力則與平均水位為反比關係。另外,平均水位在略等同於圓柱高度時,圓柱受力為五組不同平均水位中最大。在多排圓柱群應用案例中,一共設置四種模擬情境。案例A:非交錯排列之透水性圓柱群於浸沒流況、B:非交錯排列之實心圓柱群於浸沒流況、C:交錯排列之透水性圓柱群於浸沒流況、與D:非交錯排列之透水性圓柱群於非浸沒流況。在案例A和B中比較透水與實心圓柱群排與排間的受力差異,受力折減率各別為17%與11%,顯示透水性圓柱群中排與排間的影響較大。在案例A和C中,受力折減率在交錯排列下為25%,其較非交錯排列下之17%高。在案例A和D中,受力折減率在非浸沒流況為27%,而在浸沒流況為17%。 In this study, flows through porous cylinders are simulated by three-dimensional computational fluid dynamics software FLUENT and their acting forces in different water depths are discussed. The standard k-ε turbulent model and the volume fluid method (VOF) are adopted to describe the turbulent flows with free surface. To reflect the blockage effect of flows through porous cylinders, a porous media theory is introduced herein. The simulated results against the experimental data show good agreement. The resistant forces on a single cylinder with various porosities in various water depths are investigated. It is found that the resistant force increases as the water depth increases in non-submerged flows while the resistant force decreases as the water depth increases in submerged flows. In the cases of multi-row cylinders, four scenarios such as Scenario A: non-staggered porous cylinders in submerged flows, Scenario B: non-staggered solid cylinders in submerged flows, Scenario C: staggered porous cylinders in submerged flows and Scenario D: non-staggered porous cylinders in non-submerged flows are performed. To summary, from Scenarios A and B, the reduction rates in average force are respectively 17% and 11% for porous and solid cylinders. It means that the interacting effect between two rows of porous cylinders is more significant. To compare Scenarios A and C, the reduction rate in average force as 25% in staggered arrangements is larger than that as 17% in non-staggered arrangements. It can be found that the reduction rate in average force is 27% in non-submerged flows while that is 17% in submerged flows in Scenarios A and D. |
| URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/17362 |
| 全文授權: | 未授權 |
| 顯示於系所單位: | 生物環境系統工程學系 |
文件中的檔案:
| 檔案 | 大小 | 格式 | |
|---|---|---|---|
| ntu-102-1.pdf 未授權公開取用 | 4.49 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。
