Skip navigation

DSpace

機構典藏 DSpace 系統致力於保存各式數位資料(如:文字、圖片、PDF)並使其易於取用。

點此認識 DSpace
DSpace logo
English
中文
  • 瀏覽論文
    • 校院系所
    • 出版年
    • 作者
    • 標題
    • 關鍵字
    • 指導教授
  • 搜尋 TDR
  • 授權 Q&A
    • 我的頁面
    • 接受 E-mail 通知
    • 編輯個人資料
  1. NTU Theses and Dissertations Repository
  2. 管理學院
  3. 商學研究所
請用此 Handle URI 來引用此文件: http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/102476
標題: AI晶片供應鏈韌性策略評估-以NVIDIA為例
Analyzing NVIDIA's AI Chip Supply Chain Strategic Transformation
作者: 周衣絜
Yi-Chieh Chou
指導教授: 陳家麟
Chia-Lin Chen
共同指導教授: 林家振
Jia-Zhen Lin
關鍵字: NVIDIA; 台積電; AI晶片; 供應鏈韌性; 先進封裝
NVIDIA; TSMC; AI chips; supply chain resilience; advanced packaging
出版年 : 2026
學位: 碩士
摘要: 2023 年,H100 GPU 的等待時間一度超過 52 週,全球雲端大廠競相採購,卻難以即時取得貨源,當時的瓶頸並非來自輝達的晶片設計能力,而是先進封裝產能無法跟上需求爆發。台積電 CoWoS 月產能約為 1.3 萬片,難以支撐生成式 AI 帶來的算力需求急速擴張,與此同時,美國出口管制持續收緊,迫使輝達不斷調整產品規格與市場配置,當需求成長與政策限制同時發生,供應鏈韌性已不再只是後端的成本管理問題,而是直接影響輝達能否穩定出貨、維持市場主導地位的關鍵能力。
本研究以2022至2025年輝達AI晶片供應鏈為個案,採質性個案研究法,輔以自建供應鏈韌性評估框架(SCRA),從「地理集中度」、「供應商替代性」與「技術壟斷性」三個維度,系統評估晶圓製造、先進封裝(CoWoS)、HBM記憶體與系統組裝等關鍵節點的韌性策略與改善幅度。研究分析輝達如何在需求急速擴張與政策環境持續變動的雙重壓力下,透過產能鎖定、多供應商布局與技術路線調整,推動供應鏈由高度集中走向有限度分散。
跨時間點的節點評估結果顯示,各類韌性策略的改善幅度與節點技術特性高度相關:在技術壁壘相對較低、供應商替代性較高的環節,韌性已有明顯改善;但在晶圓製造與CoWoS前段等技術門檻最高的節點,短期內可行的結構調整仍相當有限。本研究據此歸納出輝達韌性提升的結構性路徑,並提出後續在供應鏈配置與政策風險管理上的研究方向與實務啟示。
In 2023, lead times for NVIDIA's H100 GPU extended beyond 52 weeks as hyperscalers competed for supply they could not secure. The constraint was not chip design, but packaging Ssigns and market reconfigurations. Together, these pressures elevated supply chain resilience from a back-office concern to the central variable shaping NVIDIA's ability to ship at scale and hold its market position.
This study examines NVIDIA's AI chip supply chain from 2022 to 2025 using a qualitative case study approach, supplemented by a self-constructed Supply Chain Resilience Assessment framework (SCRA) across three dimensions: geographic concentration, supplier substitutability, and technological monopolization. The study analyzes how NVIDIA pursued structural diversification through capacity locking, multi-supplier arrangements, and technology roadmap adjustments across key nodes including wafer fabrication, advanced packaging, HBM memory, and system assembly.
Findings show that resilience improvements were inversely correlated with technological barriers. Back-end packaging and system assembly saw meaningful gains, while front-end wafer fabrication and CoWoS remained highly concentrated in Taiwan through 2025, with limited structural change. The study identifies structural pathways for resilience improvement and outlines directions for future research.
URI: http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/102476
DOI: 10.6342/NTU202601231
全文授權: 未授權
電子全文公開日期: N/A
顯示於系所單位:商學研究所

文件中的檔案:
檔案 大小格式 
ntu-114-2.pdf
  未授權公開取用
3.29 MBAdobe PDF
顯示文件完整紀錄


系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。

社群連結
聯絡資訊
10617臺北市大安區羅斯福路四段1號
No.1 Sec.4, Roosevelt Rd., Taipei, Taiwan, R.O.C. 106
Tel: (02)33662353
Email: ntuetds@ntu.edu.tw
意見箱
相關連結
館藏目錄
國內圖書館整合查詢 MetaCat
臺大學術典藏 NTU Scholars
臺大圖書館數位典藏館
本站聲明
© NTU Library All Rights Reserved