NTU Theses and Dissertations Repository: 瀏覽

瀏覽的方式：指導教授 Fuh-Kuo Chen

跳到： 0-9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
或是輸入前幾個字：

顯示 1 到 15 筆資料，總共 15 筆

出版年	標題	作者	系所
2023	下料帶寬設計對焊管品質之影響分析 A Study on the Influence of Strip Width Design on Product Quality in Seamed Tube Manufacturing Process	蔣郁欣; Yu-Hsin Chiang	機械工程學系
2025	伺服沖床運動曲線對超高強度鋼板沖壓成形特性影響之研究 A Study on the Effects of Servo Press Motion Curves on the Stamping Formability of Ultra High Strength Steel Sheets	楊順吉; Shun-Ji Yang	機械工程學系
2023	多孔穴鋁合金擠製成形模具設計之研究 A Study on Die Design for Multi-Porthole Aluminum Extrusion	魯品毅; Pin-Yi Lu	機械工程學系
2025	大曲率明膠玻璃拉伸成形製程研析 A Study on High-curvature Stretch Forming Process of Acrylic Glass	江亞璇; Ya-Hsuan Chiang	機械工程學系
2025	明膠玻璃之溫間材料性質與成形特性探討 Investigation of Thermo-mechanical Property and Stretch-forming Behavior of Acrylic Glass	彭宇恆; Yu-Heng Peng	機械工程學系
2024	明膠玻璃慢速延展成形之模擬分析 Simulation Analysis on Slow Stretch Forming of Plexiglass	梁煜晨; Yu-Chen Liang	機械工程學系
2023	明膠玻璃溫間拉伸成形之研究 A Study on Thermo-Stretch Forming of Acrylic Glass	李昱勳; Yu-Hsun Lee	機械工程學系
2022	沖切斷面特徵對沖壓成形邊緣破裂影響之實驗分析 Experimental Analysis of the Sheared Cross-section Characteristic Effect on Edge Cracking in Sheet Metal Stamping Process	謝明諺; Ming-Yen Hsieh	機械工程學系
2025	沖切製程參數對斷面品質之影響分析與模具設計之優化探討 Investigation of Process Parameter Effects on Sheared Surface Quality and Optimization of Die Design in Punch-shearing Process	陳育賢; Yu-Xian Chen	機械工程學系
2025	精微線材彎壓成形產品之性能預測及模擬分析 Performance Prediction and Simulation Analysis of Fine-Wire Product Made by Bending-Compression Forming Process	蔡昀潔; Yun-Chieh Tsai	機械工程學系
2023	精微線材彎壓成形產品應用與疲勞分析 Application and Fatigue Analysis of Fine-Wire Product Made by Bending-Compression Forming Process	邱壬彤; Ren-Tong Qiu	機械工程學系
2024	精微線材彎壓成形產品檢測之模擬分析與預測公式建立 Simulation Analysis and Establishment of Prediction Formulas for Testing of Fine-Wire Parts Produced by Bending-Compression Forming Process	陳暉仁; Hui-Ren Chen	機械工程學系
2024	製管成形之變形機制探討與下料帶寬尺寸優化 A Study on the Deformation Mechanism in Tube Roll Forming and the Optimization of Blank Strip Width Dimension	蔣欣妤; Shin-Yu Chiang	機械工程學系
2024	複雜中空截面鋁擠型成形模擬分析與表面條紋缺陷研究 Complex-Shaped Hollow Cross-Section Aluminum Extrusion Process Simulation Analysis and Surface Streaks Defect Study	張翔; Hsiang Chang	機械工程學系
2025	超高強度鋼冷沖壓成形特性分析之研究 Analysis of Cold Stamping Formability Characteristics of Ultra High Strength Steels	邱家琪; Chia-Chi Chiu	機械工程學系

顯示 1 到 15 筆資料，總共 15 筆