請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/74413
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 單秋成(Chow-Shing Shin) | |
dc.contributor.author | Yu-Chia Chang | en |
dc.contributor.author | 張昱家 | zh_TW |
dc.date.accessioned | 2021-06-17T08:34:27Z | - |
dc.date.available | 2020-04-04 | |
dc.date.copyright | 2019-08-19 | |
dc.date.issued | 2019 | |
dc.date.submitted | 2019-08-09 | |
dc.identifier.citation | 1. LoughbroughUniversity,AdditiveManufacturing. https://www.lboro.ac.uk/research/amrg/about/.
2. 光固化成形法(Stereolithography). https://lazybone1960.pixnet.net/blog/post/60855994-%E5%85%89%E5%9B%BA%E5%8C%96%E6%88%90%E5%BD%A2%E6%B3%95%EF%BC%88stereolithography%EF%BC%89, 2014. 3. 3DMART, 3D列印技術比較:SLA與DLP. https://3dmart.com.tw/news/3d-printing-technology-comparison-sla-dlp. 4. Industry, D.P., http://3dprintingindustry.com/3d-printing-basics-free-beginners-guide/processes/. 5. HUBS, D., Manufacturing Processes Explained. https://www.3dhubs.com/knowledge-base/introduction-material-jetting-3d-printing. 6. 蔡福森, DLP 投影機技術與產品動態. 1998. 7. 劉俊廷, 以光固化3D列印技術製造阿基米德螺旋形微混合器之探討, in 機械工程學研究所. 2017, 臺灣大學. p. 1-78. 8. 胡又仁, DLP光致聚合樹脂剛性探討, in 機械工程學研究所. 2018, 臺灣大學. p. 1-142. 9. Melchels, F.P.W., J. Feijen, and D.W. Grijpma, A review on stereolithography and its applications in biomedical engineering. Biomaterials, 2010. 31(24): p. 6121-6130. 10. Mott, E.J., et al., Digital micromirror device (DMD)-based 3D printing of poly(propylene fumarate) scaffolds. Materials Science & Engineering C-Materials for Biological Applications, 2016. 61: p. 301-311. 11. Gauvin, R., et al., Microfabrication of complex porous tissue engineering scaffolds using 3D projection stereolithography. Biomaterials, 2012. 33(15): p. 3824-3834. 12. Zheng, X.Y., et al., Ultralight, Ultrastiff Mechanical Metamaterials. Science, 2014. 344(6190): p. 1373-1377. 13. 林軒邑, 以數位光學處理進行3D列印製作微米級結構, in 機械工程學研究所. 2017, 臺灣大學. p. 1-129. 14. Jang, D.C., et al., Fabrication and deformation of three-dimensional hollow ceramic nanostructures. Nature Materials, 2013. 12(10): p. 893-898. 15. 劉鎧毓, 八隅體桁架結構製作與強度探討, in 機械工程學研究所. 2018, 臺灣大學. p. 1-120. 16. L. J. Gibson, M.F.A., B. A. Harley,, Cellular Materials in Nature and Medicine. Cambridge University Press, 2010. 17. Habibi, M.K. and Y. Lu, Crack Propagation in Bamboo's Hierarchical Cellular Structure. Scientific Reports, 2014. 4. 18. Deshpande, V.S., N.A. Fleck, and M.F. Ashby, Effective properties of the octet-truss lattice material. Journal of the Mechanics and Physics of Solids, 2001. 49(8): p. 1747-1769. 19. 楊睿瑜, 鎳鈷磷合金無電鍍製程及性質研究, in 材料科學與工程研究所. 2010, 台北科技大學. p. 1-75. 20. 蔡., T.-K.T., 朝., & Chuen-Guang C. , 無電鍍NiP析鍍於矽基材及應用於生長奈米碳纖之研究. http://hdl.handle.net/11536/81791., 2004. 21. 楊聰仁, 電鍍鎳與無電鍍實驗. 22. Moroni, L., J.R. de Wijn, and C.A. van Blitterswijk, 3D fiber-deposited scaffolds for tissue engineering: Influence of pores geometry and architecture on dynamic mechanical properties. Biomaterials, 2006. 27(7): p. 974-985. 23. Murr, L.E., et al., Next-generation biomedical implants using additive manufacturing of complex, cellular and functional mesh arrays. Philosophical Transactions of the Royal Society a-Mathematical Physical and Engineering Sciences, 2010. 368(1917): p. 1999-2032. 24. 駱和東, 賈., 朱寶平,林健, 淨化色譜法同時檢測染紅食品中對位紅和蘇丹紅染料. 廈門市疾病預防中心. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/74413 | - |
dc.description.abstract | 3D列印技術發展快速,從大型物件到越來越小的微結構,而目前能達到奈米尺寸技術為雙光子聚合技術(Two-photonpolymerization,TPP),本實驗嘗試以數位光學技術(Digital Light Processing,DLP)印製出與雙光子聚合技術相近的效果,DLP為面成型相較於TPP點成型省去非常多的時間,DLP設備費也較低廉,目前所需克服問題為如何縮小投影影像並保有解析度。利用改裝投影機加上能移動較小位移之螺桿搭配電腦控制,調整模型支架尺寸、曝光時間、切層厚度、藍光吸收劑含量等參數,印製出八隅體桁架微結構
無電鍍能使物件表面附著上金屬能提升物件強度,並且能使物件具有導電性能做更多應用,且無電鍍設備成本於電鍍便宜,鍍膜厚度也均一致,尤其實驗所印製之八隅體桁架結構雖然為成分為高分子材料,但只要經過表面處理也能使用無電鍍附著加上金屬,因此本實驗目的列印出微小尺寸之八隅體桁架結構,再利用無電鍍鎳方式使結構具備有高強度。 | zh_TW |
dc.description.abstract | 3D printing technology has developed rapidly, which can print from large objects to smaller and smaller microstructures. Now which can make nanostructure is TPP (Two-photon Polymerization). Our research is how to make the same effect as Two-photon Polymerization by using DLP (Digital Light Processing) Vat Polymerization. Two-photon Polymerization consumes more time than Digital Light Processing . And the equipment be used in Digital Light Processing are more cheaper than Two-photon Polymerization. We try to adjust the lens of DLP projector which can reduce the image, but we also meet the problem which is keeping the high resolution when reducing the image.
Design the model of octet-truss by Digital Light Processing Vat Polymerization printing. We try to make the micro-scale structure by adjusting the influence which contain structure size, DB composition, exposure time and cutting thickness. And we test the compressive strength of the octet-truss structure. In addition, we want to make our structure stronger. Therefore we use the Electroless Ni on our octet-truss structure. But our material is macromolecule so we should use surface treatment. Also the surface treatment has four different methods in our processing. Discuss the effect of the four surface treatment on Electroless Ni | en |
dc.description.provenance | Made available in DSpace on 2021-06-17T08:34:27Z (GMT). No. of bitstreams: 1 ntu-108-R06522531-1.pdf: 14384901 bytes, checksum: 78142956734ef18cea296af0bfa8469d (MD5) Previous issue date: 2019 | en |
dc.description.tableofcontents | 致謝 II
摘要 IV Abstract VI 目錄 VIII 圖目錄 XI 表目錄 XVII 第1章 緒論 1 1.1 前言 1 1.2 研究動機 2 1.3 論文架構 2 第2章 文獻回顧 3 2.1 積層製造成型技術 3 2.1.1 疊層製造 Sheet Lamination 3 2.1.2 光固化成型 Vat Polymerization 4 2.1.3 材料擠出成型 Material Extrusion 6 2.1.4 材料噴塗成型 Material Jetting 7 2.1.5 粉體融化成型 Powder Bed Fusion 8 2.1.6 指向性能量沉積 Directed Energy Deposition 8 2.1.7 黏著劑噴塗成型 Binder Jetting 9 2.2 DLP光固化成型技術 10 2.2.1 DLP投影機 10 2.2.2 DMD 晶片 11 2.2.3 DLP之上照式與下照式光固化成型差異 12 2.3 雙光子聚合 14 2.4 微結構 16 2.4.1 八隅體桁架結構桁架結構 16 2.5 無電鍍鎳 17 2.5.1 無電鍍鎳液組成[20, 21] 18 2.5.2 無電鍍鎳特性[19] 20 第3章 實驗系統之架構 21 3.1 列印系統架構 21 3.1.1 投影機 21 3.1.2 移動控制平台 25 3.1.3 電腦與控制軟體 30 3.1.4 顯微物鏡 31 3.1.5 Charge-coupled Device對焦系統 32 3.2 實驗相關設備 42 3.2.1 電子天秤 42 3.2.2 超音波震盪機 43 3.2.3 磁石攪拌機 44 3.2.4 34401A 數位萬用電錶 45 3.2.5 立體顯微鏡 46 3.2.6 金相顯微鏡 47 3.2.7 電子顯微鏡 48 3.3 列印材料&無電鍍相關材料 50 3.3.1 光敏樹酯 50 3.3.2 無電鍍鎳液 51 3.4 機械性質測試設備 52 3.4.1 移動平台 52 3.4.2 壓力感測器Load Cell 54 3.4.3 位移感測器LVDT 56 第4章 實驗原理與方法 57 4.1 3D列印實驗流程&原理 57 4.2 列印過度固化改善 59 4.2.1 蘇丹一號 Sudan I 59 4.2.2 蘇丹三號Sudan Ⅲ 62 4.2.3 UV-1995 63 4.2.4 UV-1990 64 4.3 列印後處理 66 4.3.1 無電鍍鎳原理&流程 66 4.3.2 表面處理 67 4.4 機械性質壓縮測試 71 第5章 實驗結果 74 5.1 列印結構設計與命名 74 5.2 八隅體桁架結構印製結果 76 5.2.1 150 µm八隅體桁架結構結構 77 5.2.2 130 µm八隅體桁架結構結構 81 5.2.3 120 µm八隅體桁架結構結構 85 5.2.4 100 µm八隅體桁架結構結構 89 5.2.5 小結 93 5.3 無電鍍鎳成果 96 5.3.1 150微米無電鍍 96 5.3.2 130微米無電鍍鎳 108 5.3.1 小結 120 5.4 八隅體桁架結構壓縮測試 121 5.4.1 尺寸因素 122 結構L-150 µm測試 122 結構L-130 µm測試 122 結構L-120 µm測試 123 結構L-100 µm測試 124 小結 124 5.4.2 藍光吸收劑因素 126 蘇丹Ⅰ號 126 UV1995 126 小結 127 5.4.3 無電鍍鎳成果 128 濺鍍鋁表面處理 128 石墨稀表面處理 129 奈米碳管表面處理 130 活化鈀 132 小結 133 5.4.4 破壞探討 136 第6章 結論與未來展望 144 6.1 結論 144 6.2 未來展望 144 參考文獻 147 附錄 149 | |
dc.language.iso | zh-TW | |
dc.title | 3D列印微結構無電鍍鎳機械性質探討 | zh_TW |
dc.title | Discussion on Mechanical Properties of 3D Printed
Microstructure Electroless Nickel | en |
dc.type | Thesis | |
dc.date.schoolyear | 107-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 林志郎,鄭億中 | |
dc.subject.keyword | DLP光固化技術,無電鍍鎳,表面處理,壓縮測試, | zh_TW |
dc.subject.keyword | DLP Vat Polymerization,Compress test,Electroless Ni,Surface treatment, | en |
dc.relation.page | 156 | |
dc.identifier.doi | 10.6342/NTU201902820 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2019-08-12 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 機械工程學研究所 | zh_TW |
顯示於系所單位: | 機械工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-108-1.pdf 目前未授權公開取用 | 14.05 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。