請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/68211
標題: | 小面積無放大器之數位控制鋰電池充電器 An Area-Efficient Amplifier-Less Digitally-Controlled Li-Ion Battery Charger |
作者: | Sheng-Ying Lin 林聖穎 |
指導教授: | 林宗賢(Tsung-Hsien Lin) |
關鍵字: | 鋰電池充電器,數位控制,定電流模式,定電壓模式, Li-Ion battery charger,digitally-controlled,constant-current mode,constant-voltage mode, |
出版年 : | 2017 |
學位: | 碩士 |
摘要: | 鋰電池具備了高能量密度、高循環壽命、高電壓、以及不具記憶效應,因此在攜帶式裝置上,鋰電池是最好的選擇。然而,鋰電池的安全性相當重要,過度充電會損毀鋰電池之物理結構,甚至會導致爆炸。本論文實現兩種不同架構之鋰電池充電器,並提供定電流充電及定電壓充電之功能。
第一個作品為一個以類比低壓降穩壓器為基礎的鋰電池充電器。其具有簡單的電路架構及達到很小的電流漣漪,並且利用二極體形式的NMOS確保定電流和定電壓充電模式轉換時之穩定度。本作品以台積電0.35μm CMOS製程實現,輸入電源為5 V,最後輸出電壓穩在4.2 V,定電流充電之電流為600 mA而晶片面積為1.94 mm^(2)。 第二個作品提出全新數位控制架構,實現一個小面積無放大器之數位控制鋰電池充電器。由於使用數位控制技巧,此充電器省去所有類比電路,並減少高功率電晶體的大小,由此達到小面積且設計簡單化的效果。此外,數位控制之架構也讓此作品擁有更好的製程擴展性。此設計以台積電0.35μm CMOS製程實現,輸入電源為5 V,最後輸出電壓穩在4.2 V,定電流充電電流為600 mA而晶片面積僅0.768 mm^(2)。 Lithium-ion (Li-Ion) batteries have high energy density, high cycle life, and no memory effect. Therefore, Li-Ion batteries are the most suitable battery for portable devices. However, the safety of Li-Ion battery is very important. Over discharging and over charging may damage the physical structure of Li-Ion batteries, resulting in reduced battery life or even explosion. In this thesis, two compact Li-Ion battery chargers are proposed with different topologies, and provide essential charging operations including constant-current (CC) and constant-voltage (CV) modes. The first work is an analog LDO-based Li-Ion battery charger. This work features a simple circuit structure and achieves low current ripple. A diode-connected NMOS is used to ensure the stability during the transition from the CC to CV modes. This work is fabricated in TSMC 0.35-µm CMOS process with a 5-V power supply. The output voltage is 4.2 V, and the current in the CC mode is 600 mA with an area of 1.94 mm^(2). In the second work, an area-efficient, amplifier-less Li-Ion battery charger with a novel digitally-controlled architecture is proposed. Owing to the digitally-controlled technique, the proposed charger eliminates all analog circuits and reduces the size of the power transistor. Hence, the proposed charger features a simple circuit structure and a small chip area. Additionally, the nature of digital control suggests that the proposed charger has better process scalability. This work is implemented in the TSMC 0.35-µm CMOS process with a 5-V power supply. The output voltage is 4.2 V, and the charging current in the CC mode is 600 mA with an area of only 0.768 mm^(2). |
URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/68211 |
DOI: | 10.6342/NTU201704333 |
全文授權: | 有償授權 |
顯示於系所單位: | 電子工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-106-1.pdf 目前未授權公開取用 | 5.42 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。