請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/64385
標題: | 交錯式撓性平移接頭之最佳化設計 Design Optimization of a Cross-type Compliant Translational Joint |
作者: | Tai-Shen Yang 楊泰紳 |
指導教授: | 李志中 |
關鍵字: | 撓性平移接頭,撓性機構,勁度比,直交設計法,結構最佳化, compliant translational joint,compliant mechanism,stiffness ratio,orthogonal design method,structure optimization, |
出版年 : | 2012 |
學位: | 碩士 |
摘要: | 本文內容為研究三維構造撓性平移接頭的設計。首先從現有的論文及期刊等文獻瞭解現今撓性平移接頭的特性,並針對割痕式及板片式接頭作優缺點分析,定出接頭的設計方向,接著藉由文獻中的公式及接頭的各項性能參數為參考,設計出新式接頭的雛型。為了瞭解接頭的幾何尺寸對於精度的影響,使用直交設計法分析各尺寸的顯著程度。再以ANSYS的最佳化模組進行結構最佳化,並以實驗量測出接頭的各性能指數。最後根據模擬與實驗的結果驗證直交設計法及ANSYS最佳化的正確性,並驗證新式接頭的各項性能指數確實都達到要求的水準。 This thesis studies the design of a three-dimension compliant translational joint (CT joint). First, the literature search is performed to understand the characteristic of various CT joint and the pros and cons between notch-type and leaf-type joint are studied, in order to define the design guidelines of joint. Second, principles of design are determined according to the equation of the literature and the benchmarking index of joint. In order to realize the precision of effect of the dimension, this study uses the orthogonal design method to analyze significant level of the dimension. To improve the precision of the motion of CT joint, the structural optimization is performed via CAE’s optimization tool. A prototype is built and the experiments is conducted to obtain the benchmarking index. Finally, comparison of the simulation and experimental result, the design of the CT joint is verified. |
URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/64385 |
全文授權: | 有償授權 |
顯示於系所單位: | 機械工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-101-1.pdf 目前未授權公開取用 | 3.56 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。