請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/56578
標題: | 複雜機構及控制整合動態模擬應用於多軸並聯式機構機械臂之動態模擬分析 The Dynamic Co-Simulation of Complex Mechanism and Control Systems for Multi-Axial Parallel Mechanism Manipulators |
作者: | Wei-Ta Chen 陳韋達 |
指導教授: | 江茂雄(Mao-Hsiung Chiang) |
關鍵字: | 整合模擬,動態模擬,並聯機構,史都華平台,氣壓伺服系統,液壓伺服系統,運動學分析,ADAMS,MATLAB/SIMULINK,軌跡追蹤控制, co-simulation,dynamic simulation,parallel manipulator,Stewart-Gough platform,pneumatic system,hydraulic system,kinematic analysis,ADAMS,MATLAB/SIMULINK,path tracking control, |
出版年 : | 2014 |
學位: | 碩士 |
摘要: | 本研究旨在針對多軸並聯式機構機械臂整合系統之動態建模及模擬與伺服控制系統,包含三軸氣壓驅動角錐型並聯機構機械臂及六軸液壓驅動史都華平台。透過由SOLIDWORKS所繪之3D模型匯入至ADAMS動態模擬軟體,可進行各部件間運動特性建置及關節設定,此外,氣壓和液壓驅動系統以及控制系統之動態建模及模擬,以MATLAB/SIMULINK實現,藉由ADAMS及MATLAB/SIMULINK之整合模擬,將ADAMS機構動態模型匯出至MATLAB/SIMULINK環境進行複雜控制系統動態整合模擬及分析。
除上述動態建模及模擬外,並聯機構機械臂之運動學分析也是必要的。此部分採用幾何向量方法,利用空間中向量迴圈的封閉性質建立出致動器與運動平台端點間之逆向及順向運動關係,推導逆向與順向運動學之解析解,再透過MATLAB數值分析軟體以及ADAMS動態模擬軟體進行聯合模擬,驗證所推得的運動學模型之正確性。 本論文利用ADAMS及MATLAB/SIMULINK軟體整合動態分析,其中包含順、逆向運動學驗證、氣壓及液壓之單軸模擬以及加入PID控制器之複雜閉迴路軌跡追蹤模擬。此外,也針對三軸氣壓角錐型並聯機構機械臂進行實驗,包含單軸氣壓致動器之位置追蹤控制及藉由運動學規劃之機械臂端點平台三維空間軌跡,對三軸進行端點平台軌跡追蹤之閉迴路控制實驗,並與模擬結果比較,以驗證其可靠性。 This study aims to investigate the analysis and control of the multi-axial parallel mechanism manipulators, including a three-axial pneumatic pyramidal parallel mechanism manipulator and a six-axial hydraulic Stewart-Gough platform. Through importing the 3D manipulator models drafted by SOLIDWORKS software, the dynamic simulation software ADAMS (Automated Dynamic Analysis of Mechanical Systems) can be implemented, and then the motion characteristics between components and joints setting can be built. Besides, the dynamic models of the pneumatic and hydraulic driving systems as well as the closed-loop control systems are derived and implemented via MATLAB/SIMULINK. Thus, through the co-simulation of ADAMS and MATLAB/SIMULINK, the dynamic models of the manipulators can be exported from ADAMS into the MATLAB/SIMULINK environment to process control simulation and analysis. Consequently, we can simplify the dynamic analysis of complex systems, improve the simulation result accuracy, and increase the design reliability. Besides the dynamic analysis, the kinematic analysis of the manipulator systems is also necessary for the overall system analysis in this study. In the kinematic analysis, the geometric method is introduced to solve the kinematic relation between the actuated joints and the moving platform. A vector-loop closure equation is first established for each limb of the manipulator, and then the solutions for both the inverse and forward kinematics are obtained by solving the vector-loop equations. In this study, the co-simulations of the dynamic models of manipulators via ADAMS and MATLAB/SIMULINK, including the inverse and forward kinematics, the pneumatic and hydraulic dynamic models, and the feedback controllers, are implemented for open-loop analysis and the closed-loop path tracking control respectively in the two manipulators. Besides, the path tracking control experiments of the three-axial pyramidal pneumatic parallel manipulator are also achieved and compared with simulation results for verification. |
URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/56578 |
全文授權: | 有償授權 |
顯示於系所單位: | 工程科學及海洋工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-103-1.pdf 目前未授權公開取用 | 2.95 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。