請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/56578
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 江茂雄(Mao-Hsiung Chiang) | |
dc.contributor.author | Wei-Ta Chen | en |
dc.contributor.author | 陳韋達 | zh_TW |
dc.date.accessioned | 2021-06-16T05:35:51Z | - |
dc.date.available | 2019-08-17 | |
dc.date.copyright | 2014-08-17 | |
dc.date.issued | 2014 | |
dc.date.submitted | 2014-08-12 | |
dc.identifier.citation | [1] D. Zhang, 'Parallel Robotic Machine Tools,' Springer Verlag, p. 219, 2010.
[2] D. Stewart, 'A Platform with Six Degrees of Freedom,' Proceedings of the Institution of Mechanical Engineers, vol. 180, pp. 371-386, June 1, 1965 1965. [3] B. Dasgupta and T. S. Mruthyunjaya, 'Mech. Mach. Theory ' vol. 35, pp. 15-40, 2000. [4] R. Clavel, 'Delta, a fast robot with parallel geometry,' Proceedings of the International Symposium on Industrial Robots, pp. 91-100, 1988. [5] F. Pierrot, C. Reynaud, and A. Fournier, 'DELTA:a simple and efficient parallel robot,' ROBOTICA, vol. 8, pp. 105-109, 1990. [6] L.-W. Tsai, G. C. Walsh, and R. E. Stamper, 'Kinematics of a novel three DOF translational platform,' in Robotics and Automation, 1996. Proceedings., pp. 3446-3451, 1996. [7] J. Wang and X.-J. Liu, 'Analysis of a novel cylindrical 3-DOF parallel robot,' Robotics and Autonomous Systems, vol. 42, pp. 31-46, 2003. [8] V. Lukanin, 'Inverse Kinematics, Forward Kinematics and working space determination of 3-DOF parallel manipulator with SPR Joint Structure,' Mechanical Engineering, vol. 49, pp. 39-61, 2005. [9] D. Chablat and P. Wenger, 'Architecture optimization of a 3-DOF translational parallel mechanism for machining applications, the orthoglide,' Robotics and automation, IEEE Transactions on, vol. 19, pp. 403-410, 2003. [10] S. Huda, Y. Takeda, and S. Hanagasaki, 'Kinematic design of 3-URU pure rotational parallel mechanism to perform precise motion within a large workspace,' Meccanica, vol. 46, pp. 89-100, 2011. [11] H.-S. Choi, C.-S. Han, K.-Y. Lee, and S.-H. Lee, 'Development of hybrid robot for construction works with pneumatic actuator,' Automation in Construction, vol. 14, pp. 452-459, 2005. [12] H.-T. Lin, 'Design, Analsis and Path Tracking Servo Control of 3-PUU Pneumatic Parallel Manipulators with a Stereo Vision Measurement System,' Taiwan, 2012. [13] M.-H. Chiang, H.-T. Lin, and C.-L. Hou, 'Development of a Stereo Vision Measurement System for a 3D Three-Axial Pneumatic Parallel Mechanism Robot Arm,' Sensors, vol. 11, pp. 2257-2281, 2011. [14] G. Lebret, K. Liu, and F. L. Lewis, 'Dynamic analysis and control of a Stewart platform manipulator,' Journal of Robotic Systems vol. 10, pp. 629-655, 1993. [15] T. S. M. B. Dasgupta 'Close-form dynamic equations of the General Stewart platform through the Newton-Euler approach,' Mechanism and Machine Theory, vol. 33, 1998. [16] L. W. Tsai, 'Solving the Inverse Dynamics of a Stewart-Gough Manipulator by the Principle of Virtual Work,' Journal of Mechanical Design, vol. 122, 2000. [17] H. E. Merritt, Hydraulic Control Systems: New York: Wiley, 1967. [18] K. Ziaei and N. Sepehri, 'Modeling and identification of electrohydraulic Servos,' Mechtronics, vol. 10, pp. 761-772, 2000. [19] D. Ben-Dov and S. E. Salcudean, 'A force-controlled pneumatic actuator,' Robotics and Automation, IEEE Transactions on, vol. 11, pp. 906-911, 1995. [20] E. Richer and Y. Hurmuzlu, 'A high performance pneumatic force actuator system: Part I—Nonlinear mathematical model,' Journal of Dynamic Systems, Measurement, and Control, vol. 122, pp. 416-425, 1999. [21] J. Wang, D. Wang, P. R. Moore, and J. Pu, 'Modelling study, analysis and robust servocontrol of pneumatic cylinder actuator systems,' IEE Proceedings-Control Theory and Applications, vol. 148, pp. 35-42, 2001. [22] J. E. Bobrow and B. W. McDonell, 'Adaptive tracking control of an air powered robot actuator,' Journal of dynamic systems, measurement, and control, vol. 115, pp. 427-433, 1993. [23] J. E. Bobrow and B. W. McDonell, 'Modeling, identification, and control of a pneumatically actuated, force controllable robot,' Robotics and Automation, IEEE Transactions on, vol. 14, pp. 732-742, 1998. [24] A. Moran, S. Nakadai, and M. Nagai, 'Analysis of computer-controlled pneumatic servo system for robotic applications,' in Intelligent Robots and Systems '90. 'Towards a New Frontier of Applications', Proceedings. IROS '90. IEEE International Workshop on, pp. 897-902 vol.2, 1990. [25] S. Liu and J. E. Bobrow, 'An analysis of a pneumatic servo system and its application to a computer-controlled robot,' Journal of Dynamic Systems, Measurement, and Control, vol. 110, pp. 228-235, 1988. [26] T. Noritsugu and M. Takaiwa, 'Robust positioning control of pneumatic servo system with pressure control loop,' in Robotics and Automation, 1995. Proceedings., 1995 IEEE International Conference on, pp. 2613-2618 vol.3, 1995. [27] H. K. Lee, G. S. Choi, and G. H. Choi, 'A study on tracking position control of pneumatic actuators,' Mechatronics, vol. 12, pp. 813-831, 2002. [28] J.-J. E. Slotine and W. Li, Applied Nonlinear Control vol. 199: Prentice hall New Jersey, 1991. [29] E. Richer and Y. Hurmuzlu, 'A high performance pneumatic force actuator system: Part II—Nonlinear controller design,' Journal of Dynamic Systems, Measurement, and Control, vol. 122, pp. 426-434, 1999. [30] G. M. Bone and N. Shu, 'Experimental comparison of position tracking control algorithms for pneumatic cylinder actuators,' Mechatronics, IEEE/ASME Transactions on, vol. 12, pp. 557-561, 2007. [31] A.-C. Haung and K.-K. Liao, 'FAT-based adaptive sliding control for flexible arms: Theory and experiments,' Journal of Sound and Vibration, vol. 298, pp. 194-205, 11/22/ 2006. [32] L.-W. Tsai and S. Joshi, 'Kinematics and Optimization of a Spatial 3-UPU Parallel Manipulator,' journal of Mechanical Design, vol. 122, p. 439, 2000. [33] J.-P. Merlet, Parallel Robots: Springer, 2006. [34] W.-H. Chou, 'Analysis and Control of a Three-Axial Pyramidal Pneumatic Parallel Manipulator,' Master, National Taiwan University, Taipei, Taiwan, 2013. [35] K. Kutzbach, 'Mechanische Leitungsverzweigung, Maschinenbau,' Der Betreib, vol. 8, pp. 710-716, 1929. [36] K. Harib and K. Srinivasan, 'Kinematic and dynamic analysis of Stewart platform-based machine tool structures,' Robotica, vol. 21, pp. 541-554, 2003. [37] U. Mettin and P. La Hera, 'Modeling and control design for a hydraulic forestry crane,' Research Results, Department of Applied Physics and Electronics, Umea University, 2005. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/56578 | - |
dc.description.abstract | 本研究旨在針對多軸並聯式機構機械臂整合系統之動態建模及模擬與伺服控制系統,包含三軸氣壓驅動角錐型並聯機構機械臂及六軸液壓驅動史都華平台。透過由SOLIDWORKS所繪之3D模型匯入至ADAMS動態模擬軟體,可進行各部件間運動特性建置及關節設定,此外,氣壓和液壓驅動系統以及控制系統之動態建模及模擬,以MATLAB/SIMULINK實現,藉由ADAMS及MATLAB/SIMULINK之整合模擬,將ADAMS機構動態模型匯出至MATLAB/SIMULINK環境進行複雜控制系統動態整合模擬及分析。
除上述動態建模及模擬外,並聯機構機械臂之運動學分析也是必要的。此部分採用幾何向量方法,利用空間中向量迴圈的封閉性質建立出致動器與運動平台端點間之逆向及順向運動關係,推導逆向與順向運動學之解析解,再透過MATLAB數值分析軟體以及ADAMS動態模擬軟體進行聯合模擬,驗證所推得的運動學模型之正確性。 本論文利用ADAMS及MATLAB/SIMULINK軟體整合動態分析,其中包含順、逆向運動學驗證、氣壓及液壓之單軸模擬以及加入PID控制器之複雜閉迴路軌跡追蹤模擬。此外,也針對三軸氣壓角錐型並聯機構機械臂進行實驗,包含單軸氣壓致動器之位置追蹤控制及藉由運動學規劃之機械臂端點平台三維空間軌跡,對三軸進行端點平台軌跡追蹤之閉迴路控制實驗,並與模擬結果比較,以驗證其可靠性。 | zh_TW |
dc.description.abstract | This study aims to investigate the analysis and control of the multi-axial parallel mechanism manipulators, including a three-axial pneumatic pyramidal parallel mechanism manipulator and a six-axial hydraulic Stewart-Gough platform. Through importing the 3D manipulator models drafted by SOLIDWORKS software, the dynamic simulation software ADAMS (Automated Dynamic Analysis of Mechanical Systems) can be implemented, and then the motion characteristics between components and joints setting can be built. Besides, the dynamic models of the pneumatic and hydraulic driving systems as well as the closed-loop control systems are derived and implemented via MATLAB/SIMULINK. Thus, through the co-simulation of ADAMS and MATLAB/SIMULINK, the dynamic models of the manipulators can be exported from ADAMS into the MATLAB/SIMULINK environment to process control simulation and analysis. Consequently, we can simplify the dynamic analysis of complex systems, improve the simulation result accuracy, and increase the design reliability.
Besides the dynamic analysis, the kinematic analysis of the manipulator systems is also necessary for the overall system analysis in this study. In the kinematic analysis, the geometric method is introduced to solve the kinematic relation between the actuated joints and the moving platform. A vector-loop closure equation is first established for each limb of the manipulator, and then the solutions for both the inverse and forward kinematics are obtained by solving the vector-loop equations. In this study, the co-simulations of the dynamic models of manipulators via ADAMS and MATLAB/SIMULINK, including the inverse and forward kinematics, the pneumatic and hydraulic dynamic models, and the feedback controllers, are implemented for open-loop analysis and the closed-loop path tracking control respectively in the two manipulators. Besides, the path tracking control experiments of the three-axial pyramidal pneumatic parallel manipulator are also achieved and compared with simulation results for verification. | en |
dc.description.provenance | Made available in DSpace on 2021-06-16T05:35:51Z (GMT). No. of bitstreams: 1 ntu-103-R01525086-1.pdf: 3022853 bytes, checksum: b04d810557b0968fe0051595aa5dc936 (MD5) Previous issue date: 2014 | en |
dc.description.tableofcontents | 口試委員會審定書 #
誌謝……………………………….……………………………………………………………………………………i 中文摘要 ii ABSTRACT iii CONTENTS v LIST OF FIGURES viii LIST OF TABLES xiv NOMENCLATURE xv Chapter 1 Introduction 1 1.1 Preface 1 1.2 Literature Review 3 1.2.1 Parallel Manipulator 3 1.2.2 Stewart Platform 4 1.2.3 Pneumatic Servo System 5 1.3 Motivation 7 1.4 Organization of the Thesis 8 Chapter 2 System Overview 9 2.1 Mechanism Description 9 2.1.1 Three-Axial Pyramidal Parallel Manipulator 9 2.1.2 Stewart-Gough Platform 12 2.2 Manipulator Mobility 15 2.2.1 DOF of Three-Axial Pyramidal Pneumatic Parallel Manipulator 16 2.2.2 DOF of Stewart-Gough Platform 16 2.3 Layout of Test Rig of Three-Axial Pyramidal Pneumatic Parallel Manipulator 17 2.3.1 Pneumatic Servo Positioning System 17 2.3.2 Overall Manipulator System 19 Chapter 3 Analysis of Kinematics 22 3.1 Kinematics of Three-Axial Pyramidal Manipulator 23 3.1.1 Inverse Kinematics 23 3.1.2 Forward Kinematics 25 3.2 Kinematics of Six-Axial Stewart Platform 28 3.2.1 Inverse Kinematics 28 3.2.2 Forward Kinematics 31 Chapter 4 Analysis of Dynamics 33 4.1 Dynamic Modeling of the Pneumatic Servo System 33 4.1.1 Dynamic Model of the Pneumatic Servo Valve 34 4.1.2 Dynamic Model of the Pneumatic Cylinder 36 4.2 Dynamic Modeling of the Hydraulic Servo System 41 4.2.1 Dynamic Model of the Hydraulic Servo Valve 41 4.2.2 Dynamic Model of the Hydraulic Cylinder 44 Chapter 5 Simulations and Experiments 48 5.1 Simulations of Inverse and Forward Kinematics 50 5.1.1 Simulation of Three-Axial Pneumatic Parallel Manipulator 52 5.1.2 Simulation of Six-Axial Stewart-Gough Platform 59 5.2 Co-Simulation of Three-Axial Pyramidal Pneumatic Parallel Manipulator by ADAMS and SIMULINK 65 5.2.1 Open-loop Simulations for Single-Axial Pneumatic Servo System 65 5.2.2 Closed-loop Simulations for Single-Axial Pneumatic Servo System 72 5.2.3 Closed-loop Simulations for Three-Axial Pyramidal Pneumatic Parallel Manipulator 78 5.3 Experiments of Three-Axial Pyramidal Pneumatic Parallel Manipulator 84 5.3.1 Experimental Results of Path Tracking Control for a Fifth Order Trajectory 84 5.3.2 Experimental Results of Path Tracking Control of End-Effector for a Circular Trajectory 87 5.4 Co-simulation of Hydraulic Six-Axial Stewart-Gough Platform by ADAMS and SIMULINK 93 5.4.1 Open-loop Simulations for Single-Axial Hydraulic Servo System 93 5.4.2 Closed-loop Simulations for Single-Axial Hydraulic Servo System 100 5.4.3 Closed-loop Simulations for Six-Axial Stewart-Gough Platform Manipulator 103 Chapter 6 Conclusions 112 REFERENCES 114 | |
dc.language.iso | en | |
dc.title | 複雜機構及控制整合動態模擬應用於多軸並聯式機構機械臂之動態模擬分析 | zh_TW |
dc.title | The Dynamic Co-Simulation of Complex Mechanism and Control Systems for Multi-Axial Parallel Mechanism Manipulators | en |
dc.type | Thesis | |
dc.date.schoolyear | 102-2 | |
dc.description.degree | 碩士 | |
dc.contributor.coadvisor | 陳義男(Yih-Nan Chen) | |
dc.contributor.oralexamcommittee | 施明璋(Ming-Chang Shih),林榮慶(Zone-Ching Lin),吳聰能(Trong-Neng Wu) | |
dc.subject.keyword | 整合模擬,動態模擬,並聯機構,史都華平台,氣壓伺服系統,液壓伺服系統,運動學分析,ADAMS,MATLAB/SIMULINK,軌跡追蹤控制, | zh_TW |
dc.subject.keyword | co-simulation,dynamic simulation,parallel manipulator,Stewart-Gough platform,pneumatic system,hydraulic system,kinematic analysis,ADAMS,MATLAB/SIMULINK,path tracking control, | en |
dc.relation.page | 115 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2014-08-13 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 工程科學及海洋工程學研究所 | zh_TW |
顯示於系所單位: | 工程科學及海洋工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-103-1.pdf 目前未授權公開取用 | 2.95 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。