請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/52916
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 鄭榮和 | |
dc.contributor.author | Ying-Ting Chen | en |
dc.contributor.author | 陳英廷 | zh_TW |
dc.date.accessioned | 2021-06-15T16:33:51Z | - |
dc.date.available | 2018-03-01 | |
dc.date.copyright | 2015-08-17 | |
dc.date.issued | 2015 | |
dc.date.submitted | 2015-08-13 | |
dc.identifier.citation | [1] 中華人民共和國武警六輪甲車 https://zh.wikipedia.org/wiki/%E8%A3%85%E7%94%B2%E8%BD%A6
[2] 美國史崔克八輪裝甲車 https://zh.wikipedia.org/wiki/%E5%8F%B2%E5%B4%94%E5%85%8B%E8%A3%9D%E7%94%B2%E8%BB%8A [3] 愛爾蘭MOWAG Piranha III型 http://www.mdc.idv.tw/mdc/army/pirinha.htm [4] S. H. Lin, et al. 'Experiments and CAE analyses for suspension under durability road load conditions,' SAE Technical Paper, No. 2006-01-1624, 2006. [5] 陳思財,?二自由度獨立懸吊系統機構探討?,逢甲大學材料與製造工程機械工程組碩士論文,2007 [6] 梁卓中,鄧作樑,楊士賢,林憲聰,?重型輪型車輛液氣壓式懸吊系統之振動分析?,車輛工程學刊,2012 [7] E. H. Choi, et al. 'Optimum suspension unit design for enhancing the mobility of wheeled armored vehicles,' Journal of mechanical science and technology, vol.24, no. 1, pp. 323-330, 2010. [8] 陳柏豪,?獨立式懸吊機構之空間運動分析?,國立臺北科技大學車輛工程系碩士論文,2012 [9] 黃粲清,?八輪車輛越野效能分析?,國立臺灣大學機械工程學研究所碩士論文,2015 [10] 謝坤儒,?多軸車輛操控安全性模擬與分析?,國立雲林科技大學機械工程研究所碩士論文,2008 [11] 丁建仁,?履帶車輛三維運動模擬與動態分析?,大葉大學機械工程學碩士論文,2001 [12] 王喬智,?載重車輛懸吊系統之動態模擬與分析?,國防大學中正理工學院造船工程研究所碩士論文,2004 [13] 謝志誠,?輪內馬達懸吊機構之全車動態模擬敏感度分析?,國立臺灣大學機械工程學研究所碩士論文,2012 [14] 鄭俊誠,吳英正,林達偉,張永源,鍾允睿,?液氣式承載多輪獨立懸吊系統之動態模擬與分析?,中國機械工程學會第二十四屆全國學術研討會論文集,2007 [15] V. V. Jagirdar, M. S. Dadar, and V. P. Sulakhe, 'Wishbone Structure for front independent suspension of a military truck,' Defence Science Journal, vol. 60, no. 2, pp. 178-183, 2010. [16] Y. Zhang, et al. 'Vehicle chassis/suspension dynamics analysis-finite element model vs. rigid body model,' SAE Technical Paper, No. 980900, 1998. [17] 黃哲軒,?汽車懸吊結構與車身動態行為之研究?,國立臺灣海洋大學機械與機電工程學系碩士論文,2008 [18] Y. Hahn, 'Kinematics and Compliance (K & C) Simulation Using a Nonlinear Finite Element Model,' SAE Technical Paper, No. 2010-01-0951, 2010. [19] 工業技術研究院 https://www.itri.org.tw/chi/ [20] 繪圖軟體CATIA http://www.simutech.com.tw/product-simulia-side-nav01.php?cid=13 [21] 有限元素分析軟體Abaqus http://www.simutech.com.tw/product-simulia-side-nav02.php?cid=1&kid=25 [22] 機構分析軟體ADAMS http://www.mscsoftware.com/product/adams [23] 懸吊系統 http://zh.wikipedia.org/wiki/%E6%87%B8%E5%90%8A%E7%B3%BB%E7%B5%B1 [24] 賴耿陽,?汽車懸吊裝置總覽:技術理論實務?,復漢出版社,1992 [25] Thomas D. Gillespie 著,林筱增 譯,'車輛運動力學',科技圖書,2008 [26] U-car懸吊系統 http://classroom.u-car.com.tw/classroom-list.asp?ccid=8 [27] 懸吊系統基本構造 http://www.agosto.com.tw/dictionary.aspx?search=lower%20a-arm [28] 宇野 高明,?車両運動性能シЁцЁみфロЯИу?,ヲь⑦кэ出版,1994 [29] 防傾桿功能 http://porsche0806.pixnet.net/blog/post/23970483-%E5%B0%8F%E9%A3%9B(ferio)%E9%98%B2%E5%82%BE%E6%A1%BF%E5%AE%89%E8%A3%9D%E8%A8%98 [30] 整體式與獨立式懸吊的差別 http://www2.kuas.edu.tw/prof/cjh/kuaspuzzle/2000/others/car.htm [31] 許自男,?汽車操控行為下之避震器阻尼分析?,國立雲林科技大學機械工程研究所碩士論文,2005年6月 [32] 全拖曳臂式懸吊 http://hanyu.iciba.com/wiki/327079.shtml [33] 黃銘湖,?電子控制懸吊系統介紹?,車輛安全資訊網,2006 [34] 液氣壓式懸吊 http://en.wikipedia.org/wiki/Hydropneumatic_suspension [35] 數學模型 http://wiki.mbalib.com/zh-tw/%E6%95%B0%E5%AD%A6%E6%A8%A1%E5%9E%8B [36] 理想氣體方程式 https://zh.wikipedia.org/wiki/%E7%BB%9D%E7%83%AD%E8%BF%87%E7%A8%8B [37] 伯努力方程式 https://zh.wikipedia.org/wiki/%E4%BC%AF%E5%8A%AA%E5%88%A9%E5%AE%9A%E5%BE%8B [38] Jackson G.W., 'Fundamentals of the Direct Acting Shock Absorber', SAE Paper 3712, National Passenger Car Body and Materials Meeting, Detroit, Michigan. 1959 [39] 液壓阻尼液體 http://msdspds.castrol.com/bpglis/FusionPDS.nsf/Files/FC4074AF04E86B9F80257AC400378FE3/$File/BPXE-92JAL9.pdf [40] 減速墊 http://www.changhan.tw/safe004.html [41] 國際標準ISO 2631 http://www.artc.org.tw/chinese/03_service/03_02detail.aspx?pid=58 [42] 試誤法 https://zh.wikipedia.org/wiki/%E8%AF%95%E9%94%99 | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/52916 | - |
dc.description.abstract | 本研究以輪型重車之液氣壓式懸吊系統為研究對象,進行液氣壓式懸吊系統之動態與結構分析,探討新設計的液氣壓式避震器性能與懸吊構件結構強度及剛性是否符合需求。一開始根據文獻回顧,彙整以往研究懸吊系統所使用的方法,並選用適合本文之模擬方法進行分析研究。除了以文獻中常用之剛體模型模擬之外,本文亦建立更符合實際構件之柔體模型進行模擬以求得更真實的結果,並探討剛體與柔體兩種模型的模擬結果差異。本研究採用有限元素軟體Abaqus建立有限元素剛體模型進行懸吊系統模擬分析,並利用多體動力學軟體ADAMS進行相同模擬,以比對兩種軟體的模擬結果是否一致,最後再以Abaqus建立有限元素柔體模型進行模擬分析,以求得更真實之結果。結果顯示Abaqus與ADAMS之動態分析模擬結果趨勢一致,可確立剛體模型與動態分析模擬結果是合理的。由柔體模型模擬結果,可得目前設計之液氣壓式避震器性能不符合需求,而新設計之懸吊構件結構強度與剛性是足夠的。最後由柔體與剛體兩種模型的模擬結果比較,本研究提出更具效益的動態與結構分析方法,並利用此方法模擬不同參數下的懸吊響應,提供改善避震器性能之依據。 | zh_TW |
dc.description.abstract | This thesis studies the dynamic and structural analysis of the hydro-pneumatic suspension of the wheeled heavy vehicle, and discussion on the performance of the new hydro-pneumatic shock absorber and the structural strength and rigidity of new design components of the suspension. From literature review, this study summarizes conventional methods in research of the suspension system, and chooses suitable simulation methods for research. In addition to the rigid body model commonly used in the literature, this study creates a flexible body model that is closer to real suspension components to obtain more realistic results, and discusses on the differences in the results between rigid body model and flexible body model. This thesis uses finite element software: Abaqus to create rigid body model simulation analysis, and uses multi-body dynamic software: ADAMS to do the same simulation, and compare results between Abaqus and ADAMS. Finally, this study uses Abaqus to create the flexible body model to obtain more realistic results. The simulation results show that dynamic results between Abaqus and ADAMS are consistent, and it means the rigid model and its results are reasonable. From results of the flexible body model, it shows the newly designed hydro-pneumatic shock absorber doesn’t meet requirements. And the structural strength and rigidity of new design components of the suspension are enough. Finally, by comparing the results between rigid body model and flexible body model, this thesis presents a more efficient method of dynamic and structural analysis, and uses this method to simulate suspension responses with different parameters to provide the basis for improving performances of the shock absorber. | en |
dc.description.provenance | Made available in DSpace on 2021-06-15T16:33:51Z (GMT). No. of bitstreams: 1 ntu-104-R02522511-1.pdf: 4858629 bytes, checksum: 7c5721bac8d1b8c8d8bf9af69a1c4bc7 (MD5) Previous issue date: 2015 | en |
dc.description.tableofcontents | 致謝 I
摘要 II ABSTRACT III 目錄 IV 圖目錄 VII 表目錄 XI 第一章 緒論 1 1.1 前言 1 1.2 文獻回顧 4 1.3 研究動機與目的 11 1.4 研究流程與方法 12 1.5 使用軟體介紹 15 1.5.1 繪圖軟體CATIA 15 1.5.2 有限元素分析軟體Abaqus 16 1.5.3 機構分析軟體ADAMS 17 1.6 論文架構 18 第二章 懸吊系統簡介 20 2.1 懸吊系統發展歷史[23,24] 20 2.2 懸吊系統基本機能[25] 21 2.3 懸吊系統組成[26] 22 2.4 懸吊系統種類 25 2.4.1 依連桿構件設計分類[26,28] 25 2.4.2 依懸吊系統主動程度分類[33] 33 第三章 液氣壓式懸吊系統模型建立 35 3.1 液氣壓式避震器構造與作動原理 35 3.2 懸吊系統數學模型 38 3.2.1 單輪獨立懸吊系統運動方程式 38 3.2.2 液氣壓筒彈簧特性方程式 40 3.2.3 液氣壓筒阻尼特性方程式 41 3.3 液氣壓式懸吊系統運動模型建立 42 3.3.1 實體模型建立 43 3.3.2 模型組裝與拘束條件 46 3.3.3 液氣壓筒性能規格 48 3.3.4 模擬情境與行駛路面 49 第四章 液氣壓式懸吊系統之剛體模型分析 52 4.1 有限元素剛體模型建立 52 4.1.1 實體模型匯入 52 4.1.2 模型網格離散化 54 4.1.3 定義拘束條件 56 4.1.4 負載與邊界條件設定 58 4.2 有限元素剛體模型動態分析 59 4.3 有限元素剛體模型結構分析 61 4.4 ADAMS剛體模型動態分析 66 4.4.1 ADAMS模型建立 66 4.4.2 ADAMS模擬前處理設定 67 4.4.3 ADAMS模擬結果 70 4.5 小結 72 第五章 液氣壓式懸吊系統之柔體模型分析 74 5.1 有限元素柔體模型建立 74 5.2 有限元素柔體模型動態分析 76 5.3 有限元素柔體模型結構分析 78 5.4 結果討論 80 5.4.1 剛體模型與柔體模型動態分析結果比較 80 5.4.2 剛體模型與柔體模型結構分析結果比較 84 5.5 小結 86 第六章 懸吊參數改良設計 87 6.1 液氣壓式避震器彈簧參數改良 87 6.2 液氣壓式避震器阻尼參數改良 88 6.3 小結 89 第七章 成果總結與未來方向 90 7.1 成果總結 90 7.2 未來方向 91 參考文獻 92 | |
dc.language.iso | zh-TW | |
dc.title | 輪型重車液氣壓式懸吊系統之動態與結構分析 | zh_TW |
dc.title | Dynamic and Structural Analysis of Hydro-Pneumatic Suspension System for Wheeled Heavy Vehicle | en |
dc.type | Thesis | |
dc.date.schoolyear | 103-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 吳文方,劉霆 | |
dc.subject.keyword | 液氣壓式懸吊,動態分析,結構分析,有限元素,ADAMS,剛體,柔體, | zh_TW |
dc.subject.keyword | hydro-pneumatic suspension,dynamic analysis,structural analysis,finite element,ADAMS,rigid body,flexible body, | en |
dc.relation.page | 94 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2015-08-13 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 機械工程學研究所 | zh_TW |
顯示於系所單位: | 機械工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-104-1.pdf 目前未授權公開取用 | 4.74 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。