Skip navigation

DSpace JSPUI

DSpace preserves and enables easy and open access to all types of digital content including text, images, moving images, mpegs and data sets

Learn More
DSpace logo
English
中文
  • Browse
    • Communities
      & Collections
    • Publication Year
    • Author
    • Title
    • Subject
  • Search TDR
  • Rights Q&A
  • Help
    • My Page
    • Receive email
      updates
    • Edit Profile
  1. NTU Theses and Dissertations Repository
  2. 電機資訊學院
  3. 電子工程學研究所
Please use this identifier to cite or link to this item: http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/28914
Title: 0.6伏互補式金氧半導體類比電路之設計與實作
Design and Implementation of 0.6-V CMOS Analog Circuits
Authors: Chun-Hao Wei
魏軍浩
Advisor: 呂良鴻(Liang-Hung Lu)
Keyword: 低電壓,低功耗,互補式金氧半導體,類比電路設計,
low voltage,low power,CMOS,analog circuit design,
Publication Year : 2007
Degree: 碩士
Abstract: 過去十年來,消費性電子市場的快速崛起刺激了可攜式與手持裝置在功能性與降低成本上的發展,然而,這類裝置對電池壽命的要求給電路設計者帶來了新的挑戰,由於電池容量的改良技術發展緩慢,低耗電的電路設計技巧便獲得了大量的關注,此外,考慮電池本身的放電曲線,操作在低供給電壓的電路將有利於更有效的利用電池本身的所有電力,故本篇論文的主題主要關注在適合長時間待機應用的低電壓低功耗類比電路設計,提出三個利用台積電0.18-um CMOS的製程製造的晶片,首先,一個可以產生準確0.6伏電壓的電壓調節器被設計來提供混合訊號電路,透過將電晶體操作在次臨界區與使用低臨界電壓的電晶體,可在僅0.7 伏的輸入電壓下,穩定輸出0.6伏的供給電壓。除此之外,實作了一個操作在0.6伏供給電壓下的Nyquist-Rate模數轉換器,其採用冗餘位元演算法與論文中的電路設計技巧,在低電壓下轉換器產生的非理想效應可以被降低,此轉換器消耗約1微瓦的功率,並且達到6.8個有效位元的效能。最後,本論文提出一個同樣操作在0.6伏供給電壓下的三角積分模數轉換器,透過三角積分的雜訊整形特性,低電壓下面臨的諸多限制將可以被消除,達到了僅約1.5微瓦的功率消耗,並具有57.5 dB的動態範圍。
In the past decade, the fast growing market in consumer electronics has motivated the development of portable and hand-held devices with enhanced functionality and reduced fabrication cost. However, the battery lifetime required for the operation of such devices imposes a new challenge on the circuit designer. Provided the moderate advances in battery capacity, design techniques for low-power integrated circuits have attracted great attention. Besides, in consideration of the discharging curve of a battery, low-voltage circuit opera-tions are desirable such that more efficient usage of the battery power can be realized. Therefore, the topic of this thesis is mainly focused on low-voltage and low-power inte-grated circuit designs, and three circuits fabricated by TSMC 0.18-mm CMOS process are presented in this thesis. Firstly, a voltage regulator was designed to generate the supply vol-tage required to power the mixed-signal integrated circuits. By operating the transistors in the subthreshold region, the circuit provides a stable 0.6-V output voltage from an input voltage of 0.7 V. In addition, a Nyquist-rate ADC operating at 0.6-V supply voltage was implemented. By employing the redundant-signed-digit (RSD) algorithm and the proposed circuit technique, the non-ideal effects for low-voltage operations are thus alleviated. With a dc power consumption of 1 uW, the fabricated ADC achieves an ENOB of 6.8 bits. Finally, a 0.6-V Δ-Σ ADC is presented. Through the noise shaping property of Δ-Σ operation, various constraints imposed on the reduced supply voltage are eliminated. The ADC demonstrates a dynamic range of 57.5 dB at a dc power of 1.5 uW.
URI: http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/28914
Fulltext Rights: 有償授權
Appears in Collections:電子工程學研究所

Files in This Item:
File SizeFormat 
ntu-96-1.pdf
  Restricted Access
5.86 MBAdobe PDF
Show full item record


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

社群連結
聯絡資訊
10617臺北市大安區羅斯福路四段1號
No.1 Sec.4, Roosevelt Rd., Taipei, Taiwan, R.O.C. 106
Tel: (02)33662353
Email: ntuetds@ntu.edu.tw
意見箱
相關連結
館藏目錄
國內圖書館整合查詢 MetaCat
臺大學術典藏 NTU Scholars
臺大圖書館數位典藏館
本站聲明
© NTU Library All Rights Reserved