請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/27545
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 王興華(Ching-Hua Wang) | |
dc.contributor.author | Hung-Shiue su chen | en |
dc.contributor.author | 蘇陳泓學 | zh_TW |
dc.date.accessioned | 2021-06-12T18:09:10Z | - |
dc.date.available | 2008-01-30 | |
dc.date.copyright | 2008-01-30 | |
dc.date.issued | 2007 | |
dc.date.submitted | 2007-11-27 | |
dc.identifier.citation | 1. E. M. H. Broukhiyan and S. S. Lestz, ”Ethanol Fumigation of a Light Duty
Automotive Diesel Engine,” SAE Paper No.811209 (1981). 2. C. H. Wang and C. K. Law, “ Micro-Explosion of Fuel Droplets under High Pressure,” Combustion and Flame, Vol.59, pp.53-62 (1985). 3. 黎林和, “油水乳化液在柴油引擎上的可行性研究,” 國立台灣大學機械工程學研究所碩士論文 (1989). 4. J. H. Rhim, S. Y. No, G. Y. Lee,and O. Y. Yang,“Spray Characteristics of Water/Oil Emulsified Fuel,” Eighth International Conference on Liquid Atomization and Spray system, Pasadena, CA, USA (2000). 5. N. Jager-Lezer, I.Terrisse, F. Bruneau, S. Tokgoz, L. Ferreira,and D. Clausse, “Influence of Lipophilic Surfactant on the Release Kinetic of Water-Soluble Molecules Entrapped in W/O/W Multiple Emulsion,” Journal of Controlled Release, Vol.45, pp.1-13 (1997). 6. A. Silva-Cunha, M. Cheron, J. L. Grossiord, F. Puisieux, and M. Seiller, “W/O/W Multiple Emulsions of Insulin Contanaining a Protease Inhibitor and an Absorption Enhancer: Biological Activity after Oral Administration to Normal and Diabetic Rats,” International Journal of Pharmaceutics, Vol.169, pp.33-44 (1998). 7. C. Laugel, A. Baillet, M. P. Youenang Piemi, J. P. Marty, and D. Ferrier, “Oil-Water-Oil Multiple Emulsions for Prolonged Delivery of Hydrocortisone after Topical Application:Comparision with Simple Emulsions,” International Journal of Pharmaceutics, Vol.160, pp.109-117 (1998). 8. 王國華, “多重相乳化油性質及其引擎特性研究,” 國立台灣海洋大學航運技術研究所碩士論文 (2001). 9. 陳瑞宗, “油水乳化液特性研究與分析,” 國立台灣大學機械工程學研究所碩士論文 (1988). 10. T. Nakashima, “Particle Control of Emulsion by Membrane Emulsification and its Applications,” Advanced Drug Delivery Reviews, Vol.45, pp.47-56 (2000). 11. 陳和全, ”酒精替代車輛用油之研究,” 能源季刊,第15卷,第一期,第79~93頁 (1985). 12. T. K. Hayes, L. D. Savage, R. A. White and S. C. Sorenson, “ The Effect of Fumigation of Different Ethanol Proofs on a Turbocharged Diesel Engine,” SAE paper No.880497 (1988). 13. A. R. Ogston, ”Gasoline-a 1937 View,” Society of Automotive Engineers, pp.75-80 (1897). 14. J. C. Lasheras, A. C. Fernandez-Pello, and F. L. Dryer, “Initial Observations on the Free Combustion Characteristics of Water-In-Fuel Emulsions,” Combustion Science and Technology, Vol.21, pp.1-14 (1979). 15. J. C. Lasheras, A. C. Fernandez-Pello, and F. L. Dryer, “Experimental Observations on the Disruptive Combustion of Free Droplets of Multi-Component Fuels,” Combustion Science and Technology, Vol.22, pp.195-209 (1980). 16. R. Ocampo-Barrera and R. Villasenor, “An Experimental Study of the Effect of Water Content on Combustion of Heavy Oil/Water Emulsion Droplets,”Combustion and Flame, Vol.126, pp.1845-1855 (2001). 17. B. J. Wood and W. A. Rosser,“An experimental study of fuel droplet ignition,” AIAA Journal, Vol.7, pp.2288-2300 (1969). 18. 孔令杰, “雙組份柴油液滴於高溫環境下之燃燒現象觀察與研究,” 國立台灣大學機械工程學研究所碩士論文 (2004). 19. C. K. Law, “Internal Boiling and Superheating in Vaporizing Multi-component Droplets,” AICHE Journal, Vol.24, pp.626-632 (1978). 20. C. T. Avedisian and R. P. Amdres, “Bubble Nucleation in Superheated Liquid-Liquid Emulsions,” J. of Colloid and Interface, Vol.64, No.3, pp.439-453 (1978). 21. C. K. Law and H. K. Law, “A d2-Law for Multi-Component Droplet Vaporization and Combustion,” AIAA Journal, Vol.20, No.4, pp.522-527 (1982). 22. C. H. Wang and J. T. Chen, “An Experimental Investigation of the Burning Characteristics of Water-oil Emulsions,” International Communication Heat and Mass Transfer, Vol.23, No.6, pp.823-834 (1996). 23. J. M. Ballester, N. Fueyo, and C. Dopazo, ”Combustion Characteristics Of Heavy Oil-Water Emulsions,”Fuel, Vol.75,No.6, pp.695-705 (1996). 24. G. S. Jackson and C. T. Avedisian, “Combustion of Unsupported Water-in-n-Heptan Emulsion Droplets in a Convection-Free Environment,” Int. J. Heat Mass Transfer, Vol.41, No.16, pp.2503-2515 (1998). 25. R. J. Nichols, ”Investigation of the Octane Rating and Auto Ignition Temperature of Methanol-Gasoline Blends,” SAE paper NO.800258 (1980). 26. E. Valdmains and D. E. Wulfhorst, “The Effects of Emulsified Fuels and Water Induction on Diesel Combustion,” SAE 700736 (1970). 27. G. Greeves, I. M. Khan, and G. Onion, “Effects of Water Induction on Diesel Engine Combustion and Emissions,” 16th International Symposium on Combustion, pp.321 (1976). 28. T. Murayama, “Experimental Reduction of NOX, Smoke and BSFC in a Diesel Engine Using Uniquely Produced Water to Fuel Emulsion,” SAE 780224 (1978). 29. X. Chen, ”The State of the Art of Research into Methanol Fuels for Automotive Engines in China,” Int. J. of Vehicle Design, Vol.9, No.6, pp.632-640 (1988). 30. R. L. tanner, A. H. Miguel, J. B. deandrade, J. S. Gaffney and G. E. Streit, ”Atmospheric Chemistry of Aldehydes:Enhanced Peroxyacetyl Nitrate Formation from Ethanol-Fueled Vehicular Emissions,” Environment Science Technology, Vol.22, No.9, Sep, pp. 1026-1034 (1988). 31. Nil, ”Ethanol Adds to Greenhouse Effect? ” Coal and Syn Fuels Technology, Vol.9, No.8, Oct.3, pp.1-2 (1988). 32. C. S. Weaver, ”Cost-Effectiveness of Alternative Fuel and Conventional Technologies for Reducing Transit Bus Emissions in Santiago, Chile,” SAE transactions, Vol.98, No.4, pp.534-549 (1989). 33. R.J. Larbey, ”Motor Transport Use Additives for Today and Tomorrow: Environmental Issue,” Issues Relating to Air Quality and Wastes, pp.27-43, Chemicals in the Environment, British (1994). 34. M. Abu-Qudais, O. Haddad and M. Qudaisat, ”The Effect of Alcohol Fumigation on Diesel Engine Performance and Emissions,” Energy Conversion and Management, Vol.41, No.2000, pp.389-399 (1999). 35. 張政宏, “ 界面化學與活性劑概論,” 國興出版社(新竹黎明), pp.246-253 (2000). 36. 歐靜枝,“乳化溶化技術實務,”復漢出版社,pp.1-109 (1997). 37. 劉威良, “柴油、水和醇類乳化液液滴之燃燒現象的研究,” 國立台灣大學機械工程學研究所碩士論文 (2005). 38. 吳聖文, “油水乳化液乳化穩定性及其液滴燃燒特性之研究,” 國立台灣大學機械工程學研究所碩士論文 (2005). | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/27545 | - |
dc.description.abstract | 本實驗主要研究方向為乳化液的穩定性與燃燒特性,首先將生質柴油、水和醇類分別各加入1%至3%的乳化劑Tween80和Span80,再分別經由pump壓迫油水通過多孔金屬來達到混合效果,最後產生油水乳化液。而我將探討不同的水含量以及乳化劑含量的油水乳化液在不同時間下,其在顯微鏡下所觀察到的水顆粒尺寸大小,以及隨著時間所產生的油水分離情況,也就是不同成分的油水乳化液隨時間變化的穩定性。
接著以Ink-Jet printing method產生穩定的乳化液自由液滴,並使其通過高溫燃燒爐所產生的火焰平面,最後完成穩定的燃燒研究。而我將觀察與探討液滴的燃燒現象與特性,包括了燃燒速率、點火延遲以及微爆現象,並比較生質柴油與超級柴油的油水乳化液,分別在穩定性與燃燒特性上的差異,做一分析與探討,實驗結果發現,生質柴油加水乳化液要比超級柴油加水乳化液更難以穩定,但燃燒性質接近,而甲、乙醇的添加則有促進微爆劇烈程度的功用。 | zh_TW |
dc.description.abstract | The main destinations of this experiment is discussing the stability and burning characteristics of the emulsion. First, we add 1% and 3% emusifying agent Tween80 to the bio-diesel and emusifying agent span80 to water and alcohol, then we let bio-diesel pass through a porous metal and water pass another by utilizing a pump. Then bio-diesel and water will be mixed together and become an emulsion. And we will observe the size of emulsion particles with different composition, and the separation of bio-diesel and water along with time.
In other words, we discuss the stability of these emulsions. Next, we use ink-jet printing method to produce a stable free droplet of the emulsion and let the droplet pass a high-temprature flame panel made by a combustion furnace. Finally, this combustion experiment will be finished. After this experiment, we have to discuss some phenomenons and properties during the combustion of these droplets. Including burning speed, ignition delay, and micro explosion, and compare the stabilities and combustion properties between the emulsion of bio-diesel and super-diesel. We find that the emulsion of bio-diesel is less stable than that of super-diesel. However, the combustion properties of them are similar to each other. By the way, oil with methanol or ethanol will promote the micro explosion. | en |
dc.description.provenance | Made available in DSpace on 2021-06-12T18:09:10Z (GMT). No. of bitstreams: 1 ntu-96-R94522117-1.pdf: 14169910 bytes, checksum: f9ab407efbefd2adc0db02ffd84795e9 (MD5) Previous issue date: 2007 | en |
dc.description.tableofcontents | 目 錄
誌 謝 I 摘 要 II Abstract III 第一章 緒論 1 1-1 前言 1 1-2 文獻回顧 1 1-2.1 多組份乳化液的混合 1 1-2.2 液滴產生的方式 4 1-2.3 乳化液液滴燃燒現象 7 1-2.4 燃燒廢氣與對環境的影響 10 1-3 研究動機 11 第二章 理論基礎 14 2-1 乳化液與界面劑原理 14 2-1.1 乳化液的穩定性 14 2-1.2 界面活性劑與HLB值 15 2-2 燃燒分析理論 16 2-2.1 火焰外觀與熄滅 16 2-2.2 點火延遲與燃燒速率 17 2-2.3 汽化成核與微爆現象 18 第三章 實驗設備與步驟 20 3-1實驗設備 20 3-1.1 油水乳化設備 20 3-1.2 液滴產生設備 20 3-1.3 液滴燃燒設備 21 3-1.4 觀測控制設備 22 3-2實驗步驟 23 3-2.1 柴油、水和醇類混合步驟 23 3-2.2 液滴燃燒步驟 23 3-2.3 攝影觀測步驟 24 3-3 實驗儀器校正與燃燒環境分析 25 3-3.1 實驗儀器校正 25 3-3.2 燃燒環境分析 27 3-3.2.1 燃燒的化學反應式 27 3-3.2.2 燃燒氣體的體積比與流速計算: 28 3-3.2.3 燃燒爐溫度分佈 30 第四章 結果與討論 31 4-1 乳化液隨時間的變化 31 4-1.1 乳化液HLB值 31 4-1.2 巨觀的變化 32 4-1.2.1 生質、超級柴油與水之乳化液 32 4-1.2.2 生質柴油、水與醇類之乳化液 34 4-1.3 微觀的變化 35 4-2 乳化液液滴燃燒分析 36 4-2.1 數據處理方法 36 4-2.2 生質柴油和水之乳化液 37 4-2.3 生質柴油、水和甲醇之乳化液 39 4-2.4 生質柴油、水和乙醇之乳化液 40 4-3 綜合分析 40 第五章 結論 43 參考文獻 44 圖表目錄 圖(2-1.a) 界面劑的親水頭基與親油尾鏈分別吸附水與油之示意圖 49 圖(3-1.a) 實驗設備示意圖 50 圖(3-1.b) 實驗設備實體圖 51 圖(3-1.c) 油水乳化設備之示意圖 52 圖(3-1.d) 油水乳化設備之實體圖 52 表(3-1.A) 雙Micro pump單位電壓與流量關係表 53 表(3-1.B) 單一Micro pump單位電壓與流量關係表 53 圖(3-1.e) 多孔金屬過濾器外觀圖 54 圖(3-1.f) 多孔金屬過濾器內部顯微圖 54 圖(3-1.g) 液滴產生器實體圖與示意圖 55 圖(3-1.h) 氣體流量控制面板實體圖 55 圖(3-1.i) 隔熱設施上方的液滴產生器放置平台 56 圖(3-1.j) CCD Camera及顯微鏡頭組合圖 56 圖(3-3.a) 燃燒爐內溫度分布圖 57 圖(4-1.a) 生質柴油(3%Span80)┼水(3%Tween80) 沉澱圖 58 圖(4-1.b) 超級柴油(3%Span80)┼水(3%Tween80) 沉澱圖 59 圖(4-1.c) 生質柴油(3%Tween80)┼水(3%Span80) 沉澱圖 60 圖(4-1.d) 超級柴油(3%Tween80)┼水(3%Span80) 沉澱圖 61 圖(4-1.e) 生質柴油┼(75%水┼25%甲醇) 沉澱圖 62 圖(4-1.f) 生質柴油┼(75%水┼25%甲醇) 沉澱圖 63 圖(4-1.g) 生質柴油┼(50%水┼50%甲醇) 沉澱圖 64 圖(4-1.h) 生質柴油┼(50%水┼50%甲醇) 沉澱圖 65 圖(4-1.i) 生質柴油┼(25%水┼75%甲醇) 沉澱圖 66 圖(4-1.j) 生質柴油┼(25%水┼75%甲醇) 沉澱圖 67 圖(4-1.k) 生質柴油┼(75%水┼25%乙醇) 沉澱圖 68 圖(4-1.l) 生質柴油┼(75%水┼25%乙醇) 沉澱圖 69 圖(4-1.m) 生質柴油┼(50%水┼50%乙醇) 沉澱圖 70 圖(4-1.n) 生質柴油┼(50%水┼50%乙醇) 沉澱圖 71 圖(4-1.o) 生質柴油┼(25%水┼75%乙醇) 沉澱圖 72 圖(4-1.p) 生質柴油┼(25%水┼75%乙醇) 沉澱圖 73 圖(4-1.q) B(S)┼W(T)、B(T)┼W(S)乳化液隨時間分離 直條圖 74 圖(4-1.r) S(S)┼W(T)、S(T)┼W(S)乳化液隨時間分離 直條圖 75 圖(4-1.s) B┼(75%W┼25%M)乳化液隨時間分離 直條圖 76 圖(4-1.t) B┼(50%W┼50%M)乳化液隨時間分離 直條圖 77 圖(4-1.u) B┼(25%W┼75%M)乳化液隨時間分離 直條圖 78 圖(4-1.v) B┼(75%W┼25%E)乳化液隨時間分離 直條圖 79 圖(4-1.w) B┼(50%W┼50%E)乳化液隨時間分離 直條圖 80 圖(4-1.x) B┼(25%W┼75%E)乳化液隨時間分離 直條圖 81 圖(4-1.A) 生質柴油┼水 乳化液顯微照片 (7μm filter、ISO100) 82 圖(4-1.B) 生質柴油┼水 乳化液顯微照片 (7μm filter、ISO100) 83 圖(4-1.C) 生質柴油┼水 乳化液顯微照片 (7μm filter、ISO100) 84 圖(4-1.D) 生質柴油┼水 乳化液顯微照片 (7μm filter、ISO100) 85 圖(4-1.E) 生質柴油┼水 乳化液顯微照片 (7μm filter、ISO100) 86 圖(4-1.F) 生質柴油┼水 乳化液顯微照片 (7μm filter、ISO100) 87 圖(4-1.G) 生質柴油┼水 乳化液顯微照片 (7μm filter、ISO100) 88 圖(4-1.H) 生質柴油┼水 乳化液顯微照片 (7μm filter、ISO100) 89 圖(4-1.I) 超級柴油┼水 乳化液顯微照片 (7μm filter、ISO100) 89 圖(4-1.J) 生質柴油┼水 水顆粒大小與時間關係圖 90 圖(4-2.A) 柴油┼水 乳化液液滴微爆圖 91 圖(4-2.a) 生質柴油┼水 乳化液液滴燃燒火焰圖 92 圖(4-2.b) 生質柴油┼水┼甲醇 乳化液液滴燃燒火焰圖 93 圖(4-2.c) 生質柴油┼水┼甲醇 乳化液液滴燃燒火焰圖 94 圖(4-2.d) 生質柴油┼水┼乙醇 乳化液液滴燃燒火焰圖 95 圖(4-2.e) 生質柴油┼水┼乙醇 乳化液液滴燃燒火焰圖 96 圖(4-2.f) 生質柴油┼水 乳化液(點火延遲時間關係圖) 97 圖(4-2.g) 生質柴油┼水 乳化液(燃燒時間關係圖) 97 圖(4-2.h) 生質柴油┼水 乳化液(平均燃燒速率關係圖) 98 圖(4-2.i) 生質柴油┼水 乳化液(整體燃燒速率關係圖) 98 圖(4-2.j) 生質柴油┼水 乳化液(整體平均燃燒速率關係圖) 99 圖(4-2.k) 生質柴油┼水┼甲醇 乳化液(點火延遲時間關係圖) 100 圖(4-2.l) 生質柴油┼水┼甲醇 乳化液(燃燒時間關係圖) 100 圖(4-2.m) 生質柴油┼水┼甲醇 乳化液(平均燃燒速率關係圖) 101 圖(4-2.n) 生質柴油┼水┼甲醇 乳化液(整體燃燒速率關係圖) 101 圖(4-2.o) 生質柴油┼水┼甲醇 乳化液(整體平均燃燒速率關係圖) 102 圖(4-2.p) 生質柴油┼水┼乙醇 乳化液(點火延遲時間關係圖) 103 圖(4-2.q) 生質柴油┼水┼乙醇 乳化液(燃燒時間關係圖) 103 圖(4-2.r) 生質柴油┼水┼乙醇 乳化液(平均燃燒速率關係圖) 104 圖(4-2.s) 生質柴油┼水┼乙醇 乳化液(整體燃燒速率關係圖) 104 圖(4-2.t) 生質柴油┼水┼乙醇 乳化液(整體平均燃燒速率關係圖) 105 附錄(一) Span80、Tween80與生質、超級柴油之性質表 106 附錄(二) 浮子式氣體流量校正圖檔 107 附錄(三) 乳化液穩定性表 108 | |
dc.language.iso | zh-TW | |
dc.title | 生質柴油、水和醇類直接乳化穩定性及燃燒現象研究 | zh_TW |
dc.title | Stability of biodiesel , water and alcohol direct emulsification and combustion phenomena research | en |
dc.type | Thesis | |
dc.date.schoolyear | 96-1 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 賴君亮,洪祖昌 | |
dc.subject.keyword | 多孔金屬,乳化劑,乳化液,液滴,燃燒速率,點火延遲,微爆, | zh_TW |
dc.subject.keyword | porous metal,emulsifying agent,emulsion,droplet,burning speed,ignition delay,micro-explosion, | en |
dc.relation.page | 48 | |
dc.rights.note | 有償授權 | |
dc.date.accepted | 2007-11-27 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 機械工程學研究所 | zh_TW |
顯示於系所單位: | 機械工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-96-1.pdf 目前未授權公開取用 | 13.84 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。