請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/27474
標題: | 具撓性接頭五連桿組之精度分析與驗證 Precision Analysis and Verification of A Five-Bar Linkage with Compliant Joints |
作者: | Ching-Shin Lin 林景新 |
指導教授: | 李志中 |
關鍵字: | 撓性旋轉接頭,撓性機構,有限元素分析,定位精度, compliant revolute joint,compliant mechanism,FEA,position accuracy, |
出版年 : | 2011 |
學位: | 碩士 |
摘要: | 傳統機構因使用剛性機件,使得機件與機件間的接頭中存在著間隙,造成機構定位精度變差及磨耗等問題。如果機構是以撓性接頭所銜接,則可克服此一問題,獲得較好之定位精度。本研究先分析各種撓性接頭之優缺點,因組合截面型板片式撓性旋轉接頭具有運動範圍大且軸偏位小的優點,故選擇以組合截面型板片式撓性旋轉接頭作為五桿撓性機構之接頭,並將接頭之尺寸進行最佳化,再分析五桿機構之運動學、逆向動力學及工作空間,然後將組合後之五桿撓性機構以有限元素軟體ANSYS進行分析模擬,最後藉由實驗驗證,量測此五桿撓性機構之定位精度,比較模擬與實驗的結果。 Due to the manufacturing error or design tolerance, the joint in the traditional mechanism may contain clearance and hence resulting in poor position accuracy and/or wear problem of the mechanism. Thus, mechanisms using compliant joints may overcome such issues. This work investigates the advantages and disadvantages of various compliant joints. Then, a type of compliant joint made of open cross section and a combination of hollow and solid shafts is used in a five-bar mechanism. The position of the mechanism is analyzed and simulated via ANSYS software. Results of force input - displacement output by theoretical calculation and simulation are compared. Finally, an experiment on position input - displacement output is conducted to verify the precision and repeatability of the mechanism. |
URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/27474 |
全文授權: | 有償授權 |
顯示於系所單位: | 機械工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-100-1.pdf 目前未授權公開取用 | 2.4 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。