請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/16340
標題: | 以雷射直寫技術製作相變化材料微結構之研究 Nanofabrication of phase-change material structures by laser direct-write techniques |
作者: | Yen-Ju Liu 劉燕儒 |
指導教授: | 蔡定平 教授 |
關鍵字: | 相變化材料,雷射直寫技術,導電式原子力顯微儀,雷射轉印術, Phase-change material,laser direct-write techniques,conductive atomic force microscopy,Laser-induced forward transfer (LIFT), |
出版年 : | 2012 |
學位: | 碩士 |
摘要: | 相變化材料(Phase-change material)可藉由外在施加能量而使其在結晶態或非晶態之間做可逆的轉換,因此被廣泛地應用於高密度記錄之光儲存、相變化記憶體與半導體元件中。
本實驗是以濺鍍方式製備非晶態之相變化材料鍺銻碲(Ge2Sb2Te5, GST)薄膜,再藉由雷射加工使GST薄膜轉態成為結晶態,所使用的脈衝雷射可調整雷射功率(2mW~20mW)以及雷射脈衝長度(100ns~1500ns),藉由雷射改變製作不同類型的紀錄點,最後再以導電式原子力顯微儀(Conductive atomic force microscopy, C-AFM)以及光學顯微量測系統對紀錄點進行表面形貌、導電性以及光學性質之研究。 同時以雷射轉印術進行GST質量轉移,以非晶態的GST薄膜作為母版,玻璃基板作為母版,利用雷射聚焦於GST薄膜上,使其熔融並轉印至子版,觀察其轉印結構之製成穩定度以及結構均勻度。 Phase-change materials are used in rewritable optical disks and phase-change electronic memories. The application of phase-change materials are due to the ease and reversibility of the phase-transition between amorphous and crystalline state. Amorphous thin films of Ge2Sb2Te5, sputter-deposited on a thin-film gold electrode, are investigated to understanding the local electrical conductivity under the influence of focused laser beam. The various laser power (2.0mW~20mW) and pulse duration (100ns~1500ns) used in writing recorded marks.The local conductivity of recorded marks and crystalline line can be investigated by a high-resolution and high-sensitivity of conductive atomic force microscopy (C-AFM). Laser-induced forward transfer (LIFT) technique is a high-throughput fabrication method. Using the femtosecond laser pulses focused on a thin film of Ge2Sb2Te5 phase-change material, and transfer the illuminated material to a nearby substrate. |
URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/16340 |
全文授權: | 未授權 |
顯示於系所單位: | 應用物理研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-101-1.pdf 目前未授權公開取用 | 2.91 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。