請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/63618
標題: | 由微波多層電路佈局圖中萃取包含微帶線與集總元件之電路圖 Schematic extraction for lump elements and microstrip lines from layout of microwave passive circuits |
作者: | Kai-Wen Yang 楊凱文 |
指導教授: | 盧信嘉(Hsin-Chia Lu) |
關鍵字: | 電路佈局圖,必要矩形,微帶線,連結表, microstrip line,layout,essential rectangle,connection table, |
出版年 : | 2012 |
學位: | 碩士 |
摘要: | 本篇論文提供了從電路佈局圖裡擷取微帶線元件的方法,並記錄微帶線的相關參數以及與其他元件的連結關係。在對佈局圖分割出所有的必要矩形後,有些必要矩形可能是構成電容、電感的一部分。排除這些構成元件的矩形,剩下的矩形經過我們演算法的判斷與處理,可以擷取出適當長度的微帶線,並產生微帶線連結表來記錄微帶線兩端連接的元件類型與編號。參考這些資訊後,在電路圖中適當位置插入微帶線即可生成我們所需的電路圖,而電路設計者可以將此電路圖與原始的電路圖做比對,達成驗證與除錯的目的。 This thesis presents a method that extracts microstrip lines from the layout of multi-layer microwave passive circuits. After extracting some essential rectangles making up components like capacitors or inductors in the circuit by the algorithm presented previously, we can get the other essential rectangles which could be a part of microstrip lines. When we extract all microstrip lines and construct a connection table to record the components connected to every microstrip line, this program then can determine where the microstrip line should be inserted into the schematic. Finally, a schematic corresponding to the layout will be generated, and then designers can compare this schematic with the original schematic for debugging. |
URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/63618 |
全文授權: | 有償授權 |
顯示於系所單位: | 電子工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-101-1.pdf 目前未授權公開取用 | 2.1 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。