請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/30848
標題: | 使用二埠向量網路分析儀及未知終端器量測多埠散射矩陣 Multi-port network scattering matrix measurement using two-port vector network analyzer and unknown terminators |
作者: | Tuan-Yi Cheng 鄭端儀 |
指導教授: | 盧信嘉(Hsin-Chia Lu) |
關鍵字: | S-參數量測,向量網路分析儀,多埠散射矩陣, scattering matrix measurement,vector network analyzer,Multi-port network scattering matrix, |
出版年 : | 2007 |
學位: | 碩士 |
摘要: | 傳統上,使用二埠向量網路分析儀來量測多埠散射矩陣時,必需先知道終端器的值。在[16]中,提出一個不需要知道終端器之值的前提下,可以利用二埠的向量網路分析儀求出三埠網路的散射矩陣。在[17]中,提出由三埠以上的網路分析儀配合已知反射量終端器,可求出多埠網路的散射矩陣。本論文結合[16]及[17]二篇的成果,發展出在未知終端器下,多埠網路可由二埠向量網路分析儀求出的方法。以FR4製作的分支偶合器來驗證本實驗所提出的方法,可發現散射矩陣的計算值和量測值相當的符合。 Conventionally, we have to know the value of at least one terminator in advance when measuring multi-port network by using two-port vector network analyzer. [16] proposed the algorithm for three-port to two-port port reduction method with unknown terminators. [17] proposed the algorithm which can reconstruct the multi-port network with known terminator from three-port or more port scattering matrices. This work adopt the main idea of these two works and implement with Matlab program. The measured scattering matrices of a branch line coupler on FR4 substrate using proposed port reduction method shows good agreement with measurement by multi-port VNA. |
URI: | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/30848 |
全文授權: | 有償授權 |
顯示於系所單位: | 電子工程學研究所 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-96-1.pdf 目前未授權公開取用 | 943.94 kB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。