請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/9857
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 黃光裕 | |
dc.contributor.author | Yu-Jie Cha | en |
dc.contributor.author | 查宇杰 | zh_TW |
dc.date.accessioned | 2021-05-20T20:45:35Z | - |
dc.date.available | 2008-07-16 | |
dc.date.available | 2021-05-20T20:45:35Z | - |
dc.date.copyright | 2008-07-16 | |
dc.date.issued | 2008 | |
dc.date.submitted | 2008-07-11 | |
dc.identifier.citation | [1] Ehrich, F. F., Handbook of rotordynamics, McGraw-Hill,
New York, 1989. [2] Darlow, M. S., Balancing of high-speed machinery, Spring-Verlag, New York, 1989. [3] Sneck, H. J., Machine Dynamics, Prentice-Hall, Inc., 1991. [4] 黃光裕, “精細元件與精密系統”, 國立台灣大學機械工程研究所授課講義, 2005 [5] 莊明聖,“小型高速轉軸轉動動平衡測試機之開發設計與特性研究”, 國立台灣大學機械工程學研究所碩士論文,2002 [6] 美國IRD公司之動平衡機相關技術資料, Balance Quality Requirements of Rigid Rotors. [7] 德國SCHENCK公司之動平衡機相關技術資料, Types of Balancing machine, http://www.schenck-usa.com/lib_101_balance_mach_types.asp [8] 美國IRD公司之動平衡機相關技術資料, Signal Processing For Effective Vibration Analysis. [9] 美國IRD公司之動平衡機相關技術資料, Dynamic Balancing. [10]美國BTI公司之動平衡機相關技術資料, The Basics Of Balancing. [11]美國Balance Master公司之動平衡機相關技術資料, http://www.balancemaster.com/index.htm [12]美國IRD公司之動平衡機相關技術資料, http://www.irdbalancing.com/ [13]黎明发、郑建彬、吴波,“超微型转子不平衡量研究“, 武汉理工大学理学院学報,2003. | |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/9857 | - |
dc.description.abstract | 本篇論文針對牙醫手持鑽機之葉輪動不平衡量測,開發微小型高速氣渦輪轉軸用動平衡檢測機,其中包括理論分析、機構設計、機台校正以及實際量測。依據葉輪外形,設計開發出系統之功能與實體架構。為了驗證功能和性能,轉軸支撐夾持與定位、不平衡量測、轉軸驅動及轉角轉速量測等子系統都經過實驗測試。透過支撐系統振動動態理論,由支撐系統測得之振動訊號可以推導出轉軸不平衡向量。藉由支撐系統之共振行為的最佳化,可以提昇不平衡的量測解析。傅立葉轉換或波形疊合法用於濾除不可避免之干擾振動以獲得待測轉軸之不平衡向量,並探討分析量測誤差之影響因素。最後透過實際測試結果之分析,歸納出量測精確之影響因素,以及提出改善策略方案。 | zh_TW |
dc.description.abstract | The aim of this thesis is to design and develop a dynamic balancing measurement machine for high-speed turbines of dental headpieces. Its task contains theoretical analyses、machine design、calibration and practical measurements. The functional and the embodiment layout of the measurement machine is designed and developed according to the geometric form of turbines. To verify their functions and performances, a series of testing experiments are carried out for all subsystems such as the suspension system, the driving system, the unbalance measurement system, the rotating angle and speed measurement system. Based on the dynamic theory, the relationship between the unbalancing vector of a turbine and the vibration signal derived from the unbalance measurement system is deduced. Through optimizing the resonant behavior of the suspension system, the measuring resolution of unbalance can be improved. The FFT and the waveform superposition method are used to filter the interference vibrations to obtain the real unbalancing vector of the turbine and to analyze the influential parameters of the measuring error. Finally based on analysis on experimental testing, the influential factors of measurement accuracy are induced and the corresponding improvement strategies are also proposed. | en |
dc.description.provenance | Made available in DSpace on 2021-05-20T20:45:35Z (GMT). No. of bitstreams: 1 ntu-97-R95522614-1.pdf: 5441164 bytes, checksum: 801dd46345043ac905caf81faaf07c0c (MD5) Previous issue date: 2008 | en |
dc.description.tableofcontents | 口試委員審定書 I
誌謝 I 摘要 III 圖目錄 VII 表目錄 X 符號表 XI 第一章 緒論 1 1.1背景與動機 1 1.2文獻回顧 2 1.3本研究內容與簡介 4 第二章 轉動不平衡量量測理論與方法 6 2.1 轉軸分類 6 2.2 不平衡量的量測類型與分析 8 2.3轉軸平衡等級分類 14 第三章 動平衡檢測機系統之建構與設計開發 16 3.1 總系統功能與架構 16 3.1.1轉軸支撐夾持與定位子系統 19 3.1.2不平衡量量測子系統 31 3.1.4 轉速與轉角量測子系統 38 3.2 總系統之組裝 48 第四章 檢測機性能測試與校正 51 4.1轉軸支撐夾持與定位子系統測試 51 4.1.1 質量量測 52 4.1.2軸套與待測葉輪之配合 52 4.1.3 軸套與陶瓷軸承之配合 53 4.1.4 軸套與陶瓷軸承之耐磨性測試 54 4.2 不平衡量量測子系統 57 4.2.1 簧片性質測試 57 4.2.2 應變規訊號測試與分析 61 4.3 轉軸驅動子系統性能測試 64 4.4轉角與轉速量測子系統校正與測試 66 第五章 總系統測試 69 5.1 轉軸動平衡流程 71 5.2 實際平衡測試 73 5.2.1 擷取訊號分析探討 73 5.2.2 計算轉軸影響係數 76 5.3 影響動平衡精度因素探討與改善方案 82 第六章 結論與未來展望 84 參考文獻 86 附錄A 釹鐵硼(NdFeB)永久磁石之磁性能 87 附錄B 光纖位移計 88 附錄C 應變規特性規格 89 附錄D 應變規放大器特性規格 91 附錄E DAQ訊號擷取卡 95 | |
dc.language.iso | zh-TW | |
dc.title | 微小高速氣渦輪轉軸動平衡檢測機之設計開發與特性研究 | zh_TW |
dc.title | Research and Development of A Dynamic Balancing Measurement System for Miniature High-speed Turbine Rotor | en |
dc.type | Thesis | |
dc.date.schoolyear | 96-2 | |
dc.description.degree | 碩士 | |
dc.contributor.oralexamcommittee | 蔡得民,林沛群 | |
dc.subject.keyword | 牙醫手持鑽機,動平衡,不平衡量測,簧片共振,快速傅立葉展開,波形疊合, | zh_TW |
dc.subject.keyword | dental headpiece,dynamic balancing,unbalance measurement,spring resonance,FFT,wave-form superposition method, | en |
dc.relation.page | 95 | |
dc.rights.note | 同意授權(全球公開) | |
dc.date.accepted | 2008-07-11 | |
dc.contributor.author-college | 工學院 | zh_TW |
dc.contributor.author-dept | 機械工程學研究所 | zh_TW |
顯示於系所單位: | 機械工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-97-1.pdf | 5.31 MB | Adobe PDF | 檢視/開啟 |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。