請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/92997
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 陳志軒 | zh_TW |
dc.contributor.advisor | Chih-Hsuan Chen | en |
dc.contributor.author | 鄭聿 | zh_TW |
dc.contributor.author | Yu Cheng | en |
dc.date.accessioned | 2024-07-12T16:11:55Z | - |
dc.date.available | 2024-07-13 | - |
dc.date.copyright | 2024-07-12 | - |
dc.date.issued | 2024 | - |
dc.date.submitted | 2024-07-05 | - |
dc.identifier.citation | [1] International Energy Agency The Future of Cooling, (2018) Paris. 〈https://www.iea.org/reports/the-future-of-cooling〉.
[2] M.O. McLinden, J.S. Brown, R. Brignoli, A.F. Kazakov, P.A. Domanski, Limited options for low-global-warming-potential refrigerants, Nature communications 8(1) (2017) 14476. [3] H. Hou, E. Simsek, T. Ma, N.S. Johnson, S. Qian, C. Cissé, D. Stasak, N. Al Hasan, L. Zhou, Y. Hwang, Fatigue-resistant high-performance elastocaloric materials made by additive manufacturing, Science 366(6469) (2019) 1116-1121. [4] J. Chen, L. Lei, G. Fang, Elastocaloric cooling of shape memory alloys: A review, Materials Today Communications 28 (2021) 102706. [5] W. Goetzler, R. Zogg, J. Young, C. Johnson, Energy savings potential and RD&D opportunities for non-vapor-compression HVAC technologies, USA: US Department of Energy, Office of Energy Efficiency and Renewable Energy, Building Technologies Office (2014). [6] J. Tušek, K. Engelbrecht, R. Millán‐Solsona, L. Mañosa, E. Vives, L.P. Mikkelsen, N. Pryds, The elastocaloric effect: a way to cool efficiently, Advanced Energy Materials 5(13) (2015) 1500361. [7] G.J. Pataky, E. Ertekin, H. Sehitoglu, Elastocaloric cooling potential of NiTi, Ni2FeGa, and CoNiAl, Acta Materialia 96 (2015) 420-427. [8] J.M. Jani, M. Leary, A. Subic, M.A. Gibson, A review of shape memory alloy research, applications and opportunities, Materials & Design (1980-2015) 56 (2014) 1078-1113. [9] M.J. Mahtabi, N. Shamsaei, M. Mitchell, Fatigue of Nitinol: The state-of-the-art and ongoing challenges, journal of the mechanical behavior of biomedical materials 50 (2015) 228-254. [10] J. Oliveira, R. Miranda, N. Schell, F.B. Fernandes, High strain and long duration cycling behavior of laser welded NiTi sheets, International Journal of Fatigue 83 (2016) 195-200. [11] M.F. Wagner, N. Nayan, U. Ramamurty, Healing of fatigue damage in NiTi shape memory alloys, Journal of Physics D: Applied Physics 41(18) (2008) 185408. [12] A. Isalgué Buxeda, H. Soul, A. Yawny, C.E. Auguet Sangrá, Functional fatigue recovery of superelastic cycled NiTi wires based on near 100ºC aging treatments, ESOMAT 2015, 2015. [13] C.-L. Liang, K.-L. Lin, The microstructure and property variations of metals induced by electric current treatment: A review, Materials Characterization 145 (2018) 545-555. [14] M.-J. Kim, K. Lee, K.H. Oh, I.-S. Choi, H.-H. Yu, S.-T. Hong, H.N. Han, Electric current-induced annealing during uniaxial tension of aluminum alloy, Scripta Materialia 75 (2014) 58-61. [15] P. Liang, K.-L. Lin, Non-deformation recrystallization of metal with electric current stressing, Journal of Alloys and Compounds 722 (2017) 690-697. [16] X. Xu, Y. Zhao, B. Ma, M. Zhang, Electropulsing induced evolution of grain-boundary precipitates without loss of strength in the 7075 Al alloy, Materials Characterization 105 (2015) 90-94. [17] R. Zhu, J. Liu, G. Tang, S.-Q. Shi, M. Fu, Z.T.H. Tse, The improved superelasticity of NiTi alloy via electropulsing treatment for minutes, Journal of alloys and compounds 584 (2014) 225-231. [18] H.-J. Jeong, J.-W. Park, E. Shin, W. Woo, M.-J. Kim, H.N. Han, Electric current-induced precipitation hardening in advanced high-strength steel, Scripta Materialia 220 (2022) 114933. [19] R. Panciroli, Influence of electric current on the thermo-mechanical static and fatigue properties of shape memory NiTi wires, Smart Materials and Structures 29(11) (2020) 115046. [20] H.-J. Jeong, M.-J. Kim, S.-J. Choi, J.-W. Park, H. Choi, V.T. Luu, S.-T. Hong, H.N. Han, Microstructure reset-based self-healing method using sub-second electric pulsing for metallic materials, Applied Materials Today 20 (2020) 100755. [21] T. Tadaki, C. Wayman, Electron microscopy studies of martensitic transformations in Ti50Ni50− xCux alloys. Part II. Morphology and crystal structure of martensites, Metallography 15(3) (1982) 247-258. [22] T.H. Nam, T. Saburi, K.i. Shimizu, Cu-content dependence of shape memory characteristics in Ti–Ni–Cu alloys, Materials Transactions, JIM 31(11) (1990) 959-967. [23] J.-H. Kim, J.-H. Lim, W.-T. Lee, J.G. Kim, J.S. Oh, T. Lee, S. Li, T.-h. Nam, Microstructures and mechanical behavior of Ti-(38+ x) Ni-12Cu (at%)(x= 0∼ 3) alloys, Journal of Alloys and Compounds 938 (2023) 168664. [24] K. Jeong, S.-W. Jin, S.-G. Kang, J.-W. Park, H.-J. Jeong, S.-T. Hong, S.H. Cho, M.-J. Kim, H.N. Han, Athermally enhanced recrystallization kinetics of ultra-low carbon steel via electric current treatment, Acta Materialia 232 (2022) 117925. [25] V. Delobelle, G. Chagnon, D. Favier, T. Alonso, Study of electropulse heat treatment of cold worked NiTi wire: From uniform to localised tensile behaviour, Journal of Materials Processing Technology 227 (2016) 244-250. [26] H. Kessler, W. Pitsch, On the nature of the martensite to austenite reverse transformation, Acta Metall Mater 15(2) (1967) 401-405. [27] L. Delaey, R.V. Krishnan, H. Tas, H. Warlimont, Thermoelasticity, pseudoelasticity and the memory effects associated with martensitic transformations, Journal of Materials Science 9(9) (1974) 1521-1535. [28] K. Otsuka, K. Shimizu, On the crystallographic reversibility of martensitic transformations, Scripta Metall Mater 11(9) (1977) 757-760. [29] G.B. Olson, M. Cohen, Kinetics of strain-induced martensitic nucleation, Metallurgical transactions A 6(4) (1975) 791-795. [30] D.P. Dunne, C.M. Wayman, The effect of austenite ordering on the martensite transformation in Fe-Pt alloys near the composition Fe3Pt: I. Morphology and transformation characteristics, Metall Trans 4(1) (1973) 137-145. [31] T. Tadaki, K. Otsuka, K. Shimizu, Shape memory alloys, Annual Review of Materials Research 18 (1988) 25-45. [32] R.D. James, K.F. Hane, Martensitic transformations and shape-memory materials, Acta Mater 48(1) (2000) 197-222. [33] C.M. Wayman, Shape memory alloys, MRS bulletin 18(4) (1993) 49-56. [34] T. Saburi, Y. Watanabe, S. Nenno, Morphological characteristics of the orthorhombic martensite in a shape memory Ti–Ni–Cu alloy, ISIJ international 29(5) (1989) 405-411. [35] H. Sehitoglu, R. Hamilton, D. Canadinc, X.Y. Zhang, K. Gall, I. Karaman, Y. Chumlyakov, H.J. Maier, Detwinning in NiTi alloys, Metallurgical and Materials Transactions A 34(1) (2003) 5-13. [36] K. Otsuka, K. Shimizu, Pseudoelasticity and shape memory effects in alloys, International Metals Reviews 31(1) (1986) 93-114. [37] T.A. Schroeder, C.M. Wayman, Pseudoelastic effects in Cu Zn single crystals, Acta Metall Mater 27(3) (1979) 405-417. [38] S. Qian, Y. Geng, Y. Wang, J. Ling, Y. Hwang, R. Radermacher, I. Takeuchi, J. Cui, A review of elastocaloric cooling: Materials, cycles and system integrations, International journal of refrigeration 64 (2016) 1-19. [39] L. Manosa, A. Planes, E. Vives, E. Bonnot, R. Romero, The use of shape-memory alloys for mechanical refrigeration, Functional Materials Letters 2(02) (2009) 73-78. [40] X. Zuo, W. Zhang, Y. Chen, J. Oliveira, Z. Zeng, Y. Li, Z. Luo, S. Ao, Wire-based directed energy deposition of NiTiTa shape memory alloys: microstructure, phase transformation, electrochemistry, X-ray visibility and mechanical properties, Additive Manufacturing 59 (2022) 103115. [41] B. Li, L. Wang, B. Wang, D. Li, J. Oliveira, R. Cui, J. Yu, L. Luo, R. Chen, Y. Su, Electron beam freeform fabrication of NiTi shape memory alloys: crystallography, martensitic transformation, and functional response, Materials Science and Engineering: A 843 (2022) 143135. [42] Y. Li, D. Zhao, J. Liu, Giant and reversible room-temperature elastocaloric effect in a single-crystalline Ni-Fe-Ga magnetic shape memory alloy, Scientific reports 6(1) (2016) 25500. [43] Y. Wu, E. Ertekin, H. Sehitoglu, Elastocaloric cooling capacity of shape memory alloys–Role of deformation temperatures, mechanical cycling, stress hysteresis and inhomogeneity of transformation, Acta Mater 135 (2017) 158-176. [44] K. Otsuka, X. Ren, Recent developments in the research of shape memory alloys, Intermetallics 7(5) (1999) 511-528. [45] H.O. T.B. Massalski, P.R. Subramanian, L. Kacprzak. Editors. , Binary Alloys Phase Diagrams, ASM International 3 (1990) 2875. [46] C.M. Jackson, H.M. Wagner, R.J. Wasilewski, 55-Nitinol-The Alloy with a Memory: It's Physical Metallurgy Properties, and Applications. NASA SP-5110, NASA Special Publication 5110 (1972). [47] K. Otsuka, T. Sawamura, K. Shimizu, Crystal structure and internal defects of equiatomic TiNi martensite, Physica status solidi (a) 5(2) (1971) 457-470. [48] S. Pfeiffer, M.F.-X. Wagner, Elastic deformation of twinned microstructures, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences 473(2204) (2017) 20170330. [49] K.M. Knowles, D.A. Smith, The crystallography of the martensitic transformation in equiatomic nickel-titanium, Acta Metall Mater 29(1) (1981) 101-110. [50] O. Matsumoto, S. Miyazaki, K. Otsuka, H. Tamura, Crystallography of martensitic transformation in Ti Ni single crystals, Acta Metall Mater 35(8) (1987) 2137-2144. [51] M. Matsumoto, T. Honma, Martensitic Transformation of Intermetallic Compound Ti 50 Ni 47 Fe 3, New Aspects of Martensitic Transformation. Japan Institute of Metals, Tokyo. 1976, 199-204 (1976). [52] V.N. Khachin, Martensitic transformation and shape memory effect in B2 intermetallic compounds of titanium, Revue de physique appliquée 24(7) (1989) 733-739. [53] C.-H. Tu, S.-K. Wu, C. Lin, B.-Y. Huang, A study on two R-phase transformations in intermediate temperature aged Ni-rich TiNiFe-based shape memory alloys, Intermetallics 132 (2021) 107123. [54] G. Sandrock, A. Perkins, R. Hehemann, The premartensitic instability in near-equiatomic TiNi, Metallurgical Transactions 2 (1971) 2769-2781. [55] C. Hwang, M. Meichle, M. Salamon, C. Wayman, Transformation behaviour of a Ti50Ni47Fe3 alloy II. Subsequent premartensitic behaviour and the commensurate phase, Philosophical Magazine A 47(1) (1983) 31-62. [56] S. Miyazaki, S. Kimura, K. Otsuka, Shape-memory effect and pseudoelasticity associated with the R-phase transition in Ti-50· 5 at.% Ni single crystals, Philosophical Magazine A 57(3) (1988) 467-478. [57] H.C. Ling, R. Kaplow, Phase transitions and shape memory in NiTi, Metallurgical and Materials Transactions A 11(1) (1980) 77-83. [58] T. Fukuda, T. Saburi, K. Doi, S. Nenno, Nucleation and self-accommodation of the R-phase in Ti–Ni alloys, Materials Transactions, JIM 33(3) (1992) 271-277. [59] X. Ren, N. Miura, J. Zhang, K. Otsuka, K. Tanaka, M. Koiwa, T. Suzuki, Y.I. Chumlyakov, M. Asai, A comparative study of elastic constants of Ti–Ni-based alloys prior to martensitic transformation, Materials Science and Engineering: A 312(1-2) (2001) 196-206. [60] T. Tadaki, Y. Nakata, K.i. Shimizu, Thermal cycling effects in an aged Ni-rich Ti–Ni shape memory alloy, Transactions of the Japan institute of metals 28(11) (1987) 883-890. [61] C.M. Hwang, M. Meichle, M.B. Salamon, C.M. Wayman, Transformation behaviour of a Ti50Ni47Fe3 alloy I. Premartensitic phenomena and the incommensurate phase, Philosophical Magazine A 47(1) (1983) 9-30. [62] G. Airoldi, G. Bellini, C. Di Francesco, Transformation cycling in NiTi alloys, Journal of Physics F: Metal Physics 14(8) (1984) 1983. [63] S.K. Wu, H.C. Lin, Recent development of TiNi-based shape memory alloys in Taiwan, Mater Chem Phys 64(2) (2000) 81-92. [64] M. Sato, A. Ishida, S. Miyazaki, Two-way shape memory effect of sputter-deposited thin films of Ti 51.3 at.% Ni, Thin Solid Films 315(1-2) (1998) 305-309. [65] T. Saburi, T. Tatsumi, S. Nenno, Effects of heat treatment on mechanical behavior of Ti-Ni alloys, Le Journal de Physique Colloques 43(C4) (1982) C4-261. [66] J. Frenzel, J.A. Burow, E.J. Payton, S. Rezanka, G. Eggeler, Improvement of NiTi shape memory actuator performance through ultra‐fine grained and nanocrystalline microstructures, Advanced engineering materials 13(4) (2011) 256-268. [67] V. Brailovski, S. Prokoshkin, K. Inaekyan, V. Demers, Functional properties of nanocrystalline, submicrocrystalline and polygonized Ti–Ni alloys processed by cold rolling and post-deformation annealing, Journal of Alloys and Compounds 509(5) (2011) 2066-2075. [68] S. Miyazaki, Y. Igo, K. Otsuka, Effect of thermal cycling on the transformation temperatures of Ti Ni alloys, Acta Metall Mater 34(10) (1986) 2045-2051. [69] X. Wang, Z. Pu, Q. Yang, S. Huang, Z. Wang, S. Kustov, J. Van Humbeeck, Improved functional stability of a coarse-grained Ti-50.8 at.% Ni shape memory alloy achieved by precipitation on dislocation networks, Scripta Materialia 163 (2019) 57-61. [70] H.-z. Wang, Y.-d. Zhao, Y.-h. Ma, Z.-y. Gao, Effect of low-energy proton on the microstructure, martensitic transformation and mechanical properties of irradiated Ni-rich TiNi alloy thin films, International Journal of Minerals, Metallurgy and Materials 27 (2020) 538-543. [71] J.-h. Shim, J.-h. Kim, J.-h. Lim, J.G. Kim, J.S. Oh, T. Lee, S. Li, T.-h. Nam, Improvement in the superelasticity of a Ti–35.5 Ni–15Cu (at.%) alloy using Ti (Ni, Cu) 2 phase, Materials Science and Engineering: A 847 (2022) 143346. [72] A. Ishida, M. Sato, K. Ogawa, Microstructure of annealed Ti48. 5Ni (51.5–x) Cu x (x= 6.2–33.5) thin films, Philosophical Magazine 88(16) (2008) 2427-2438. [73] X. Meng, M. Sato, A. Ishida, Structure of martensite in sputter-deposited (Ni, Cu)-rich Ti–Ni–Cu thin films containing Ti (Ni, Cu) 2 precipitates, Acta materialia 57(5) (2009) 1525-1535. [74] R.D. James, Z. Zhang, A way to search for multiferroic materials with “unlikely” combinations of physical properties, Magnetism and structure in functional materials, Springer2005, pp. 159-175. [75] P. Šittner, P. Sedlák, H. Seiner, P. Sedmák, J. Pilch, R. Delville, L. Heller, L. Kadeřávek, On the coupling between martensitic transformation and plasticity in NiTi: Experiments and continuum based modelling, Progress in Materials Science 98 (2018) 249-298. [76] H. Gu, L. Bumke, C. Chluba, E. Quandt, R.D. James, Phase engineering and supercompatibility of shape memory alloys, Materials Today 21(3) (2018) 265-277. [77] H.M. Paranjape, M.L. Bowers, M.J. Mills, P.M. Anderson, Mechanisms for phase transformation induced slip in shape memory alloy micro-crystals, Acta Materialia 132 (2017) 444-454. [78] P. Sedmák, P. Šittner, J. Pilch, C. Curfs, Instability of cyclic superelastic deformation of NiTi investigated by synchrotron X-ray diffraction, Acta Materialia 94 (2015) 257-270. [79] Y. Song, X. Chen, V. Dabade, T.W. Shield, R.D. James, Enhanced reversibility and unusual microstructure of a phase-transforming material, Nature 502(7469) (2013) 85-88. [80] C. Chluba, W. Ge, R. Lima de Miranda, J. Strobel, L. Kienle, E. Quandt, M. Wuttig, Ultralow-fatigue shape memory alloy films, Science 348(6238) (2015) 1004-1007. [81] A.N. Bucsek, G.A. Hudish, G.S. Bigelow, R.D. Noebe, A.P. Stebner, Composition, compatibility, and the functional performances of ternary NiTiX high-temperature shape memory alloys, Shape Memory and Superelasticity 2(1) (2016) 62-79. [82] R. Zarnetta, R. Takahashi, M.L. Young, A. Savan, Y. Furuya, S. Thienhaus, B. Maaß, M. Rahim, J. Frenzel, H. Brunken, Identification of quaternary shape memory alloys with near‐zero thermal hysteresis and unprecedented functional stability, Advanced Functional Materials 20(12) (2010) 1917-1923. [83] C. Bechtold, C. Chluba, R. Lima de Miranda, E. Quandt, High cyclic stability of the elastocaloric effect in sputtered TiNiCu shape memory films, Applied Physics Letters 101(9) (2012). [84] J. Cui, Y.S. Chu, O.O. Famodu, Y. Furuya, J. Hattrick-Simpers, R.D. James, A. Ludwig, S. Thienhaus, M. Wuttig, Z. Zhang, Combinatorial search of thermoelastic shape-memory alloys with extremely small hysteresis width, Nat Mater 5(4) (2006) 286-290. [85] Z. Zhang, R.D. James, S. Müller, Energy barriers and hysteresis in martensitic phase transformations, Acta Materialia 57(15) (2009) 4332-4352. [86] G. Stachowiak, P. McCormick, Shape memory behaviour associated with the R and martensitic transformations in a NiTi alloy, Acta Metallurgica 36(2) (1988) 291-297. [87] L. Rong, D.A. Miller, D.C. Lagoudas, Transformation behavior in a thermomechanically cycled TiNiCu alloy, Metallurgical and materials transactions A 32 (2001) 2689-2693. [88] O.W. Bertacchini, D.C. Lagoudas, E. Patoor, Thermomechanical transformation fatigue of TiNiCu SMA actuators under a corrosive environment–Part I: Experimental results, International Journal of Fatigue 31(10) (2009) 1571-1578. [89] C. Chluba, W. Ge, T. Dankwort, C. Bechtold, R.L. de Miranda, L. Kienle, M. Wuttig, E. Quandt, Effect of crystallographic compatibility and grain size on the functional fatigue of sputtered TiNiCuCo thin films, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences 374(2074) (2016) 20150311. [90] H. Chen, F. Xiao, X. Liang, Z. Li, X. Jin, T. Fukuda, Stable and large superelasticity and elastocaloric effect in nanocrystalline Ti-44Ni-5Cu-1Al (at%) alloy, Acta Materialia 158 (2018) 330-339. [91] B. Xu, C. Yu, G. Kang, Phase field study on the microscopic mechanism of grain size dependent cyclic degradation of super-elasticity and shape memory effect in nano-polycrystalline NiTi alloys, International Journal of Plasticity 145 (2021) 103075. [92] G. Li, D. Chen, S. Wang, Y. Tong, Y. Jiang, F. Jiang, Tailoring microstructure and martensitic transformation of selective laser melted Ti49. 1Ni50. 9 alloy through electropulsing treatment, Materials Today Communications 31 (2022) 103437. [93] X. Ge, S. Liu, G. Wang, Thermal-induced martensitic transformation of NiTi shape memory alloy promoted by pulse current, Materials Today Communications 32 (2022) 104028. [94] B. Hu, Q. Wen, Q. Guo, Y. Wang, H. Sui, H. Luo, A novel electric pulse pathway to suppress plastic localization and enhance strain hardening of medium Mn steel, Scripta Materialia 221 (2022) 114991. [95] X. Ba, M. Zhou, X. Zhang, H. Wang, Manipulating dislocations using electric field to repair embrittlement damage, ISIJ International 60(8) (2020) 1803-1809. [96] J.-W. Park, H.-J. Jeong, S.-W. Jin, M.-J. Kim, K. Lee, J.J. Kim, S.-T. Hong, H.N. Han, Effect of electric current on recrystallization kinetics in interstitial free steel and AZ31 magnesium alloy, Materials Characterization 133 (2017) 70-76. [97] A. Sprecher, S. Mannan, H. Conrad, Overview no. 49: On the mechanisms for the electroplastic effect in metals, Acta Metallurgica 34(7) (1986) 1145-1162. [98] H. Conrad, Thermally activated plastic flow of metals and ceramics with an electric field or current, Materials Science and Engineering: A 322(1-2) (2002) 100-107. [99] R. Zhu, Y. Jiang, L. Guan, H. Li, G. Tang, Difference in recrystallization between electropulsing-treated and furnace-treated NiTi alloy, Journal of Alloys and Compounds 658 (2016) 548-554. [100] R. Delville, B. Malard, J. Pilch, P. Sittner, D. Schryvers, Microstructure changes during non-conventional heat treatment of thin Ni–Ti wires by pulsed electric current studied by transmission electron microscopy, Acta Materialia 58(13) (2010) 4503-4515. [101] S. Miyazaki, T. Imai, Y. Igo, K. Otsuka, Effect of cyclic deformation on the pseudoelasticity characteristics of Ti-Ni alloys, Metallurgical transactions A 17 (1986) 115-120. [102] L.C. Brinson, I. Schmidt, R. Lammering, Stress-induced transformation behavior of a polycrystalline NiTi shape memory alloy: micro and macromechanical investigations via in situ optical microscopy, Journal of the Mechanics and Physics of Solids 52(7) (2004) 1549-1571. [103] D. Roy, V. Buravalla, P. Mangalgiri, S. Allegavi, U. Ramamurty, Mechanical characterization of NiTi SMA wires using a dynamic mechanical analyzer, Materials Science and Engineering: A 494(1-2) (2008) 429-435. [104] K. Chu, Q. Sun, Reducing functional fatigue, transition stress and hysteresis of NiTi micropillars by one-step overstressed plastic deformation, Scripta Materialia 201 (2021) 113958. [105] N.T.U. Department of Materials Science and Engineering, Rigaku TTRAX III XRD. https://homepage.ntu.edu.tw/~kcyuan/18kw_xrd.html. [106] JEOL company, JSM-7800F Schottky Field Emission Scanning Electron Microscope. https://www.jeol.com/products/scientific/sem/JSM-7800F.php. [107] N.T.U. Department of Materials Science and Engineering, Tecnai™ G2 F20 TEM from FEI company. https://mse.ntu.edu.tw/cl_n_174176.html. [108] N.T.U. Department of Materials Science and Engineering, Tecnai™ G2 F30 TEM from FEI company. https://mse.ntu.edu.tw/cl_n_174175.html. [109] Correlated Solutions company, VIC-2D digital image correlation system equipment. https://www.correlatedsolutions.com/vic-2d. [110] Blink Technology company, VIC-2D from Correlated Solutions. https://www.blinktech.com.au/product/vic-2d/#prettyPhoto. [111] Teledyne FLIR company, FLIR A615 infrared camera. https://www.flir.asia/products/a615/?vertical=rd%20science&segment=solutions. [112] Y. Cheng, C.-H. Chen, Healing effect of electric current treatment on superelasticity and elastocaloric effect of TiNi shape memory wire, Journal of Alloys and Compounds 968 (2023) 171990. [113] T. Duerig, K. Bhattacharya, The influence of the R-phase on the superelastic behavior of NiTi, Shape Memory and Superelasticity 1 (2015) 153-161. [114] M.-X. Wagner, S. Dey, H. Gugel, J. Frenzel, C. Somsen, G. Eggeler, Effect of low-temperature precipitation on the transformation characteristics of Ni-rich NiTi shape memory alloys during thermal cycling, Intermetallics 18(6) (2010) 1172-1179. [115] X. Wang, S. Kustov, K. Li, D. Schryvers, B. Verlinden, J. Van Humbeeck, Effect of nanoprecipitates on the transformation behavior and functional properties of a Ti–50.8 at.% Ni alloy with micron-sized grains, Acta Materialia 82 (2015) 224-233. [116] J.-h. Kim, J.-h. Lim, J.G. Kim, J.S. Oh, T. Lee, M.-S. Kim, S. Li, T.-h. Nam, Microstructure, transformation behavior and superelasticity of an aged Ti-40Ni-12Cu (at%) shape memory alloy, Journal of Alloys and Compounds 900 (2022) 163390. [117] P. Dang, F. Ye, Y. Zhou, L. Ding, J. Pang, L. Zhang, X. Ding, J. Sun, S. Dai, T. Lookman, Low-fatigue and large room-temperature elastocaloric effect in a bulk Ti49. 2Ni40. 8Cu10 alloy, Acta Materialia 229 (2022) 117802. [118] Z. Gao, M. Sato, A. Ishida, Microstructure and shape memory behavior of annealed Ti44. 5Ni55. 5− XCuX (X= 15.3–32.8) thin films with low Ti content, Journal of Alloys and Compounds 619 (2015) 389-395. [119] T.H. Nam, T. Saburi, Y. Nakata, K.i. Shimizu, Shape memory characteristics and lattice deformation in Ti–Ni–Cu alloys, Materials Transactions, JIM 31(12) (1990) 1050-1056. [120] X. Yang, L. Ma, J. Shang, Martensitic transformation of Ti50 (Ni50− x Cu x) and Ni50 (Ti50− x Zr x) shape-memory alloys, Scientific Reports 9(1) (2019) 3221. [121] R. James, Z. Zhang, R. James, Z. Zhang, A way to search for multiferroic materials with “unlikely” combinations of physical properties, Magnetism and structure in functional materials (2005) 159-175. [122] B. Sun, M. Fu, J. Lin, Y. Ning, Effect of low-temperature aging treatment on thermally-and stress-induced phase transformations of nanocrystalline and coarse-grained NiTi wires, Materials & Design 131 (2017) 49-59. [123] M. Mueller, H. Knott, The crystal structures of Ti2Cu, Ti2Ni, Ti4Ni2O, and Ti4Cu2O, Transactions of American Institute of Metallurgical Engineers 227(ANL-FGF-396) (1963). [124] T.-h. Nam, J.-h. Lee, G.-b. Cho, Y.-w. Kim, Stability of the B19 martensite in rapidly solidified Ti–Ni–Cu alloys, Materials Science and Engineering: A 438 (2006) 687-690. [125] J. Frenzel, On the importance of structural and functional fatigue in shape memory technology, Shape Memory and Superelasticity 6(2) (2020) 213-222. [126] J. Murray, The Cu− Ti (copper-titanium) system, Bulletin of alloy phase diagrams 4(1) (1983) 81-95. [127] T. Fukuda, M. Kitayama, T. Kakeshita, T. Saburi, Martensitic transformation behavior of a shape memory Ti–40.5 Ni–10Cu alloy affected by the C11b-type precipitates, Materials transactions, JIM 37(10) (1996) 1540-1546. [128] Y. Xiao, P. Zeng, L. Lei, Grain size effect on mechanical performance of nanostructured superelastic NiTi alloy, Materials Research Express 4(3) (2017) 035702. [129] H. Chen, F. Xiao, X. Liang, Z. Li, Z. Li, X. Jin, T. Fukuda, Giant elastocaloric effect with wide temperature window in an Al-doped nanocrystalline Ti–Ni–Cu shape memory alloy, Acta Materialia 177 (2019) 169-177. [130] J. Chen, Y. Wu, H. Yin, In situ multi-field investigation of grain size effects on the rate-dependent thermomechanical responses of polycrystalline superelastic NiTi, Materials Letters 259 (2020) 126845. [131] N.-H. Lu, C.-H. Chen, Improving the functional stability of TiNi-based shape memory alloy by multi-principal element design, Materials Science and Engineering: A 872 (2023) 144999. [132] J. Chen, L. Xing, G. Fang, L. Lei, W. Liu, Improved elastocaloric cooling performance in gradient-structured NiTi alloy processed by localized laser surface annealing, Acta Materialia 208 (2021) 116741. [133] A. Ishida, M. Sato, Z. Gao, Effects of Ti content on microstructure and shape memory behavior of TixNi (84.5− x) Cu15. 5 (x= 44.6–55.4) thin films, Acta materialia 69 (2014) 292-300. [134] P. Dang, J. Pang, Y. Zhou, L. Ding, L. Zhang, X. Ding, T. Lookman, J. Sun, D. Xue, Improved stability of superelasticity and elastocaloric effect in Ti-Ni alloys by suppressing Lüders-like deformation under tensile load, Journal of Materials Science & Technology 146 (2023) 154-167. [135] P. Dang, Y. Zhou, X. Ding, J. Sun, T. Lookman, D. Xue, Tailoring Grain Size and Precipitation via Aging for Improved Elastocaloric Stability in a Cold-Rolled (Ni, Cu)-Rich Ti–Ni–Cu Alloy, Shape Memory and Superelasticity 9(2) (2023) 334-344. [136] K. Otsuka, C.M. Wayman, Shape memory materials, Cambridge university press1999. [137] H. Ossmer, F. Lambrecht, M. Gültig, C. Chluba, E. Quandt, M. Kohl, Evolution of temperature profiles in TiNi films for elastocaloric cooling, Acta materialia 81 (2014) 9-20. [138] F. Xiao, A. Bucsek, X. Jin, M. Porta, A. Planes, Giant elastic response and ultra-stable elastocaloric effect in tweed textured Fe-Pd single crystals, Acta Materialia 223 (2022) 117486. | - |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/92997 | - |
dc.description.abstract | 本研究以電流對TiNi基合金進行熱處理。首先,以通電加熱(直流電)方式研究富Ni之Ti49Ni51形狀記憶線材每經歷100次超彈性循環後的修復效果,在不將Ti49Ni51線材(直徑0.5毫米)從拉伸試驗機上取出的情況下利用電流熱效應進行通電加熱,旨在實現在無需移動材料的情形下修復形狀記憶合金的效果。此外,本研究亦以脈衝電流對冷抽之富(Ni,Cu) Ti49Ni41Cu10形狀記憶線材進行退火,改善其功能穩定性;透過析出延性佳之Ti(Ni,Cu)2,成功製備了直徑同為0.5毫米之Ti49Ni41Cu10線材,接著再以額外具有非熱效應的高密度脈衝電流對線材進行高效率之退火,以獲得優秀的超彈性及彈熱冷卻效應穩定性。對於電流密度較低的情形(20.4 A/mm2),可以透過在每100次超彈性循環之後將材料加熱2分鐘以部份恢復Ti49Ni51線材衰退的超彈性及彈熱效應;通電3 ~ 4次後,Ti49Ni51線材的彈熱升溫能力及彈熱降溫能力趨於穩定,且與未經過任何熱處理的情況相比分別恢復了約14%與6%。此恢復現象的機制為Ti49Ni51線材內部在超彈性循環過程中產生的殘留麻田散體由於通電加熱(熱效應)發生麻田散體逆相變態而被消除。另一方面,由於額外的非熱效應之存在,可以透過高密度脈衝電流(60 A/mm2)在0.3秒內對冷抽之Ti49Ni41Cu10線材進行高效率的退火,讓線材產生再結晶的效果,晶粒尺寸則大約為20 ~ 30奈米。退火之Ti49Ni41Cu10線材具有優秀的超彈性及彈熱冷卻效應穩定性;在65 °C施加3.5%應變的情形下,該線材在50次超彈性循環後累積的殘留應變僅有0.15%,而彈熱降溫能力在50次循環內則大約維持在9.4 °C。此外,在施加3%應變的情形下,該線材在50 °C至100 °C的溫度範圍內的彈熱降溫能力為5.3 °C ~ 8.1 °C。退火之Ti49Ni41Cu10線材之優秀的功能穩定性可歸因於奈米晶粒結構以及B2與B19相之間優異的相容性。總體而言,本研究初步開發透過通電加熱來調整TiNi基合金的微觀結構;透過調整電流密度及通電時間,此方法可恢復衰退之彈熱效應或者獲得具有優秀之功能穩定性的材料,這些成果都將有助於固態冷卻材料的發展及應用。 | zh_TW |
dc.description.abstract | In this study, electric current was utilized to treat TiNi-based alloys. First, direct current (DC) was employed to investigate the healing effects of an as-received Ni-rich Ti49Ni51 shape memory wire after every 100 superelastic cycles. For the Ti49Ni51 wire with a diameter of 0.5 mm, the electric current treatment was applied, taking advantage of its thermal effect, without removing the wire from the tensile machine, aiming for online healing of the shape memory alloy. In addition, pulsed electric current was applied to anneal a cold-drawn (Ni,Cu)-rich Ti49Ni41Cu10 shape memory wire to improve its functional performance. The Ti49Ni41Cu10 wire with the same diameter (0.5 mm) was successfully fabricated with the help of the existence of ductile Ti(Ni,Cu)2 precipitates. Subsequently, a high-density pulsed current, with an extra athermal effect, was utilized to efficiently anneal the wire and obtain superior superelasticity and stable elastocaloric cooling capacity. For the electric current treatment with a lower density (20.4 A/mm2), the degraded superelasticity and elastocaloric effect of the Ti49Ni51 wire after every 100 superelastic cycles could be partially restored by heating the material for 2 min. After 3–4 treatments, the elastocaloric temperature rise and drop of the Ti49Ni51 wire reached steady states and recovered about 14% and 6%, respectively, as compared with the case without any heat treatment. The mechanism of the recovery phenomenon lies in that the residual martensite introduced into the Ti49Ni51 wire during superelastic cycles could be eliminated due to reverse martensitic transformation through the electric current treatment (thermal effect). On the other hand, with the help of the extra athermal effect, the cold-drawn Ti49Ni41Cu10 wire could be effectively annealed through the high-density pulsed electric current (60 A/mm2) in only 0.3 sec, resulting in recrystallization in the wire, with a grain size of about 20–30 nm. The annealed Ti49Ni41Cu10 wire demonstrated superior stability in superelasticity and elastocaloric cooling capability. The accumulated residual strain was only 0.15% after 50 superelastic cycles with an applied strain of 3.5% at 65 °C, and the elastocaloric temperature drop of the wire remained at about 9.4 °C for 50 cycles. Moreover, under 3% applied strain, the wire exhibited elastocaloric temperature drops of 5.3 °C to 8.1 °C within the application window of 50 °C to 100 °C. The exceptional functional stability of the annealed Ti49Ni41Cu10 wire is attributed to the combination of nanocrystalline structure and high compatibility between the B2 and B19 phases. In summary, this study contributes to the development of using electric current treatment to tune the microstructure of TiNi-based alloys. By tuning the current density and treatment duration, it can recover the degraded elastocaloric effect or obtain materials with superior functional performance, both of which are viable for solid-state refrigeration applications. | en |
dc.description.provenance | Submitted by admin ntu (admin@lib.ntu.edu.tw) on 2024-07-12T16:11:55Z No. of bitstreams: 0 | en |
dc.description.provenance | Made available in DSpace on 2024-07-12T16:11:55Z (GMT). No. of bitstreams: 0 | en |
dc.description.tableofcontents | Originality statement i
口試委員會審定書 ii 誌謝 iii Abstract iv 摘要 vi Publication viii Content x List of Figures xiv List of Tables xxiii Chapter 1 Introduction 1 Chapter 2 Literature review 6 2-1 Characteristics of SMAs 6 2-1-1 Mechanism of shape memory effect 11 2-1-2 Mechanism of superelasticity 12 2-1-3 Mechanism of elastocaloric effect 16 2-2 Introduction of TiNi-based SMAs 19 2-2-1 Method for enhancing stability in TiNi-based SMAs 24 2-2-2 Characteristic cofactor (λ2) of functional stability 29 2-2-3 Reason for superior stability in TiNiCu SMAs 31 2-3 Tune the microstructures of metals by heat treatment through electric current treatment 34 2-3-1 Recover the functional fatigue of TiNi-based SMAs by heating the specimens 38 Chapter 3 Experimental methods 40 3-1 Preparation and melting of alloys 42 3-1-1 Preparation and annealing of (Ni,Cu)-rich Ti49Ni41Cu10 wire 43 3-1-2 Preparation of Ni-rich Ti49Ni51 wire 44 3-2 Measurement of transformation temperature 45 3-3 Measurement of crystal structure and lattice constants 46 3-4 Observation of microstructure 47 3-4-1 Preparation of FESEM sample 48 3-4-2 Preparation of TEM samples 49 3-5 Measurement of superelastic behavior 50 3-5-1 Superelastic test method for Ti49Ni51 wire 50 3-5-2 Superelastic test method for Ti49Ni41Cu10 wire 52 3-6 Measurement of elastocaloric effect 53 3-7 Healing effect of electric current treatment on Ti49Ni51 wire 54 Chapter 4 Healing effect of electric current treatment on superelasticity and elastocaloric effect of Ti49Ni51 shape memory wire 56 4-1 Characterization of the as-received Ti49Ni51 wire 56 4-2 The effect of the electric current treatment on superelasticity of the Ti49Ni51 wire 58 4-2-1 Discussions on the recovery of residual strain by electric current treatment 65 4-3 Recovery of elastocaloric effect of the Ti49Ni51 wire through electric current treatment 67 4-3-1 Influence of treatment time on the recovery of elastocaloric effect 74 4-3-2 Discussions on the restoration of the elastocaloric effect of the Ti49Ni51 wire through electric current treatment 77 4-4 An investigation on the recovery phenomenon through microstructural observations 82 4-5 Improvement in the stability of the elastocaloric effect of the Ti49Ni51 wire after electric current treatment 84 4-6 A convenient strategy to recover the functionality of the Ti49Ni51 wire 85 Chapter 5 Pulsed electric current annealing of (Ni,Cu)-rich Ti49Ni41Cu10 shape memory wire for superior superelasticity and stable elastocaloric cooling effect 86 5-1 Influence of different pulsed electric current densities (60 A/mm2, 70 A/mm2, and 80 A/mm2) on the cyclic stability of the cold-drawn Ti49Ni41Cu10 wire 86 5-2 The fundamental characteristics of the Ti49Ni41Cu10 wire 88 5-2-1 TEM observations of the Ti49Ni41Cu10 wire 95 5-3 Superelasticity of the Ti49Ni41Cu10 wire 99 5-4 Elastocaloric effect of the Ti49Ni41Cu10 wire 105 5-5 Operation window of the Ti49Ni41Cu10 wire 108 5-6 Evaluating the theoretical elastocaloric cooling capacity of the Ti49Ni41Cu10 wire 110 5-7 A strategy to obtain the Ti49Ni41Cu10 wire with a stable functional performance 113 Chapter 6 Conclusions 116 Future work 119 References 120 | - |
dc.language.iso | en | - |
dc.title | 通電加熱對Ti-Ni及Ti-Ni-Cu形狀記憶合金線材之超彈性、彈熱效應與功能穩定性影響之研究 | zh_TW |
dc.title | The Effect of Electric Current Heat Treatment on the Superelasticity, Elastocaloric Effect, and Functional Stability of Ti-Ni and Ti-Ni-Cu Shape Memory Wires | en |
dc.type | Thesis | - |
dc.date.schoolyear | 112-2 | - |
dc.description.degree | 博士 | - |
dc.contributor.oralexamcommittee | 陳建彰;林新智;鄭憶中;曾立維 | zh_TW |
dc.contributor.oralexamcommittee | Jian-Zhang Chen;Hsin-Chih Lin;I-Chung Cheng;Li-Wei Tseng | en |
dc.subject.keyword | TiNi基合金,形狀記憶線材,超彈性,彈熱效應,麻田散體相變態,功能穩定性,通電加熱, | zh_TW |
dc.subject.keyword | TiNi-based alloys,shape memory wires,superelasticity,elastocaloric effect,martensitic transformation,functional stability,electric current treatment, | en |
dc.relation.page | 139 | - |
dc.identifier.doi | 10.6342/NTU202401170 | - |
dc.rights.note | 同意授權(全球公開) | - |
dc.date.accepted | 2024-07-05 | - |
dc.contributor.author-college | 工學院 | - |
dc.contributor.author-dept | 機械工程學系 | - |
顯示於系所單位: | 機械工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-112-2.pdf | 6.7 MB | Adobe PDF | 檢視/開啟 |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。