請用此 Handle URI 來引用此文件：
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/92783完整後設資料紀錄
| DC 欄位 | 值 | 語言 |
|---|---|---|
| dc.contributor.advisor | 黃奎隆 | zh_TW |
| dc.contributor.advisor | Kwei-Long Huang | en |
| dc.contributor.author | 蘇羽禎 | zh_TW |
| dc.contributor.author | Yu-Jhen Su | en |
| dc.date.accessioned | 2024-06-24T16:09:29Z | - |
| dc.date.available | 2024-06-25 | - |
| dc.date.copyright | 2024-06-24 | - |
| dc.date.issued | 2024 | - |
| dc.date.submitted | 2024-06-06 | - |
| dc.identifier.citation | [1] 王春香，趙強.快速成型中基於零件製造精度的分層演演算法優化 [J].製造 技術與機床， 2015（3）：4.DOI：10.3969/j.issn.1005-2402.2015.03.008.
[2] 劉金柱.鐳射熔融金屬3D 列印設備現狀及其發展 [J].中國設備工程， 2016 （12）：3. [3] Alok Kumar Yadav,Anbesh Jamwal,Rajeev Agrawal, et al. Environmental Impact Assessment during Additive Manufacturing Production. CRC Press eBooks. 2022;0 (0):149-161. doi:10.1201/9781003123866-8 [4] Grant Guggenbiller,Scott Brooks,Olivia King, et al. 3D Printing of Green and Renewable Polymeric Materials: Toward Greener Additive Manufacturing. ACS applied polymer materials. 2023;5 (5):3201-3229. doi:10.1021/acsapm.2c02171 [5] Heike Romanowski,Frank S. Bierkandt,Andreas Luch, et al. Summary and derived Risk Assessment of 3D printing emission studies. Atmospheric Environment. 2023;294 (0):119501 119501.doi:10.1016/j.atmosenv.2022.119501 [6] Hewu Sun, Bin Zou, Xinfeng Wang, Wei Chen, Guangxu Zhang, Tao Quan, Chuanzhen Huang,Advancements in multi-material additive manufacturing of advanced ceramics: A review of strategies, techniques and equipment,Materials Chemistry and Physics,Volume 319,2024,129337,ISSN 0254- 0584,https://doi.org/10.1016/j.matchemphys.2024.129337. [7] Ivan Kundrata,Maïssa K. S. Barr,Sarah Tymek, et al. Additive Manufacturing in Atomic Layer Processing Mode. Small methods. 2022;6 (5):0-0. doi:10.1002/smtd.202101546 [8] Jens Artz,Tobias Müller,Katharina Thenert, et al. Sustainable Conversion of Carbon Dioxide: An Integrated Review of Catalysis and Life Cycle Assessment. Chemical Reviews. 2017;118 (2):434-504. doi:10.1021/acs.chemrev.7b00435 [9] Mona Prabhakar,A. Saravanan,A. Haiter Lenin, et al. A short review on 3D printing methods, process parameters and materials. Materials Today: Proceedings. 2021;45 (0):6108-6114. doi:10.1016/j.matpr.2020.10.225 [10] Mazher Iqbal Mohammed,Daniel Wilson,Eli Gomez-Kervin, et al. Sustainability and feasibility assessment of distributed E-waste recycling using additive manufacturing in a Bi-continental context. Additive manufacturing. 2022;50 (0):102548-102548. doi:10.1016/j.addma.2021.102548 [11] Mehmet Erdi Korkmaz,Saad Waqar,Alberto García-Collado, et al. A technical overview of metallic parts in hybrid additive manufacturing industry. Journal ofmaterials research and technology. 2022;18 (0):384-395. doi:10.1016/j.jmrt.2022.02.085 [12] Tae-Gyu Lee,Wonjong Jeong,SeungHyeok Chung, et al. Effects of TiC on the microstructure refinement and mechanical property enhancement of additive manufactured Inconel 625/TiC metal matrix composites fabricated with novel core-shell composite powder. Journal of Materials Science & Technology. 2023;164 (0):13-26. doi:10.1016/j.jmst.2023.04.033 [13] Vicente Linares, Marta Casas, Jörg Huwyler, Isidoro Caraballo,Stereolithographic 3D printing: Formulation design based on percolation thresholds,Journal of Drug Delivery Science and Technology,Volume 90,2023,105099,ISSN 1773- 2247,https://doi.org/10.1016/j.jddst.2023.105099. [14] Vilas J Kharat, Puran Singh, G Sharath Raju, Dinesh Kumar Yadav, M Satyanarayana.Gupta, Vanya Arun, Ali Hussein Majeed, Navdeep Singh, Additive manufacturing (3D printing): A review of materials, methods, applications and challenges,Materials Today: Proceedings,2023, ISSN 2214-7853,https://doi.org/10.1016/j.matpr.2023.11.033. [15] https://www.reccessary.com/zh-tw/reccpedia/industry/carbon-emissionsfrom- the-steel-industry | - |
| dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/92783 | - |
| dc.description.abstract | 本研究圍繞著 3D 列印技術對碳排放減量的推動研究展開，旨在評估該技術如何透過提升原料利用效率和優化製造流程來減少碳足跡。首先描述研究背景，指出消費性電子市場的快速成長及對環境造成的壓力，強調了 3D 列印技術環保潛力的研究意義。採用案例分析法、量化分析以及對照研究，本研究整理了 3D 列印技術的發展歷程，比較了與傳統製造相比該技術在環境效益方面的優勢。本論文建立了碳排放計算公式，量化分析了 3D 列印在消費性電子產品中的應用及其碳排減量潛力，並透過精選案例實證分析，提出有效的碳排放減量策略。研究結論歸納了 3D列印印技術在碳排減量方面的具體貢獻，並對未來的研究提出了展望，預見該技術在環境永續發展中的重要角色。 | zh_TW |
| dc.description.abstract | This study revolves around the application of 3D printing technology in the field of consumer electronics and its contribution to carbon emission reduction, aiming to evaluate how this technology can reduce the carbon footprint by improving the efficiency of raw material utilization and optimizing manufacturing processes. The paper begins by outlining the research background, noting the rapid growth of the consumer electronics market and the resulting environmental pressures, and emphasizing the significance of researching the environmental potential of 3D printing technology. Using case study analysis, quantitative analysis, and comparative research, this study traces the development of 3D printing technology, comparing its environmental benefits with those of traditional manufacturing. The paper establishes a carbon emission calculation model, quantitatively analyzes the application of 3D printing in consumer electronic products and its potential for emission reduction, and through carefully selected case studies, proposes effective carbon emission reduction strategies. The research conclusion summarizes the specific contributions of 3D printing technology to carbon reduction and looks forward to the future research, foreseeing the important role of this technology in environmentally sustainable development. | en |
| dc.description.provenance | Submitted by admin ntu (admin@lib.ntu.edu.tw) on 2024-06-24T16:09:29Z No. of bitstreams: 0 | en |
| dc.description.provenance | Made available in DSpace on 2024-06-24T16:09:29Z (GMT). No. of bitstreams: 0 | en |
| dc.description.tableofcontents | 誌謝 I
摘要 II Abstract III 目次 IV 圖次 VI 表次 VII 第一章 緒論 1 1.1 背景與動機介紹 1 1.2 研究目的 2 第二章 文獻探討 3 2.1 3D列印發展歴程 3 2.1.1 發明與早期應用 3 2.1.2 技術演進與突破 4 2.1.3 當前技術現狀分析 5 2.1.4 3D 列印技術在消費電子製造業量產方案的局限與突破 6 2.2 3D列印技術原理 7 2.2.1 增材製造原理 7 2.2.2 不同3D列印技術對比 10 2.2.3 關鍵材料與技術環節 12 2.3 3D列印與消費性電子行業 13 2.3.1 消費性電子巿場趨勢 13 2.3.2 3D列印在消費性電子中的應用案例 15 2.3.3 3D列印技術對消費性電子發展的影響 20 第三章 3D列印技術對碳排放的影響分析 22 3.1 3D列印技術的環境效益 22 3.1.1 原材料利用率提升 22 3.1.2 製造過程節能減排 23 3.1.3 循環利用與廢物處理 25 3.2 溫室氣體排放及核算邊界 27 3.2.1 計算原理 27 3.2.2 排放測量與數據獲取 28 3.2.3 模型驗證與案例分析 29 3.3 3D列印技術與傳統製造對比研究 30 3.3.1 生產效率對比 30 3.3.2 碳排放量化對比 31 3.3.3 綜合環境效益評估 32 第四章 個案探討 34 4.1 3D列印主流設備及技術 34 4.1.1 3D列印產業趨勢 34 4.1.2 3D列印市場主要設備供應商 35 4.2 個案公司 36 4.2.1 個案公司簡介 36 4.2.2 個案公司的3D列印應用案例 37 4.2.3 碳排放量化結果 43 第五章 研究結論及建議 45 5.1 研究成果總結 45 5.2 未來研究展望 45 參考文獻列表 48 | - |
| dc.language.iso | zh_TW | - |
| dc.subject | 3D 列印技術 | zh_TW |
| dc.subject | 案例分析 | zh_TW |
| dc.subject | 環境效益 | zh_TW |
| dc.subject | 碳排放減量 | zh_TW |
| dc.subject | Environmental Benefits | en |
| dc.subject | Carbon Emission Reduction | en |
| dc.subject | Case Analysis | en |
| dc.subject | Consumer Electronics | en |
| dc.subject | 3D Printing Technology | en |
| dc.title | 3D 列印技術對碳排放減量的推動效益研究 | zh_TW |
| dc.title | A Study on the Development of 3D Printing Technology’s Benefits on Carbon Emission Reduction | en |
| dc.type | Thesis | - |
| dc.date.schoolyear | 112-2 | - |
| dc.description.degree | 碩士 | - |
| dc.contributor.oralexamcommittee | 藍俊宏;楊朝龍 | zh_TW |
| dc.contributor.oralexamcommittee | Jakey Blue ;Chao-Lung Yang | en |
| dc.subject.keyword | 3D 列印技術,碳排放減量,環境效益,案例分析, | zh_TW |
| dc.subject.keyword | 3D Printing Technology,Consumer Electronics,Carbon Emission Reduction,Environmental Benefits,Case Analysis, | en |
| dc.relation.page | 49 | - |
| dc.identifier.doi | 10.6342/NTU202401098 | - |
| dc.rights.note | 同意授權(全球公開) | - |
| dc.date.accepted | 2024-06-07 | - |
| dc.contributor.author-college | 工學院 | - |
| dc.contributor.author-dept | 工業工程學研究所 | - |
| dc.date.embargo-lift | 2029-06-05 | - |
| 顯示於系所單位： | 工業工程學研究所 | |
文件中的檔案：
| 檔案 | 大小 | 格式 | |
|---|---|---|---|
| ntu-112-2.pdf 此日期後於網路公開 2029-06-05 | 2.96 MB | Adobe PDF |
系統中的文件，除了特別指名其著作權條款之外，均受到著作權保護，並且保留所有的權利。