請用此 Handle URI 來引用此文件:
http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/90698
完整後設資料紀錄
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.advisor | 孫珍理 | zh_TW |
dc.contributor.advisor | Chen-li Sun | en |
dc.contributor.author | 吳逸軒 | zh_TW |
dc.contributor.author | Yi-Hsuan Wu | en |
dc.date.accessioned | 2023-10-03T17:13:59Z | - |
dc.date.available | 2023-11-10 | - |
dc.date.copyright | 2023-10-03 | - |
dc.date.issued | 2023 | - |
dc.date.submitted | 2023-08-04 | - |
dc.identifier.citation | [1] J. Davalath and Y. Bayazitoglu, "Forced convection cooling across rectangular blocks," Journal of Heat Transfer, vol. 109, pp. 321-328, 1987, doi: 10.1115/1.3248083.
[2] H. N. Chaudhry, B. R. Hughes, and S. A. Ghani, "A review of heat pipe systems for heat recovery and renewable energy applications," Renewable and Sustainable Energy Reviews, vol. 16, pp. 2249-2259, 2012, doi: 10.1016/j.rser.2012.01.038. [3] P. J. Berenson, "Experiments on pool-boiling heat transfer," International Journal of Heat and Mass Transfer, vol. 5, pp. 985-999, 1962, doi: 10.1016/0017-9310(62)90079-0. [4] M. L. Hosain, R. B. Fdhila, and A. Daneryd, "Heat transfer by liquid jets impinging on a hot flat surface," Applied Energy, vol. 164, pp. 934-943, 2016, doi: 10.1016/j.apenergy.2015.08.038. [5] Z. Zhang, P. X. Jiang, X. L. Ouyang, J. N. Chen, and D. M. Christopher, "Experimental investigation of spray cooling on smooth and micro-structured surfaces," International Journal of Heat and Mass Transfer, vol. 76, pp. 366-375, 2014, doi: 10.1016/j.ijheatmasstransfer.2014.04.010. [6] J. Kim, "Spray cooling heat transfer: The state of the art," International Journal of Heat and Fluid Flow, vol. 28, pp. 753-767, 2007, doi: 10.1016/j.ijheatfluidflow.2006.09.003. [7] T. Cader, L. J. Weatra, and R. C. Eden, "Spray cooling thermal management for increased device reliability," IEEE Transactions on Device and Materials Reliability, vol. 4, pp. 605-613, 2004, doi: 10.1109/TDMR.2004.838978. [8] H. T. El-Dessouky, H. M. Ettouney, and Y. Al-Roumi, "Multi-stage flash desalination: present and future outlook," Chemical Engineering Journal, vol. 73, pp. 173-190, 1999, doi: 10.1016/S1385-8947(99)00035-2. [9] M. F. Zotarelli, B. D. A. Porciuncula, and J. B. Laurindo, "A convective multi-flash drying process for producing dehydrated crispy fruits," Journal of Food Engineering, vol. 108, pp. 523-531, 2012, doi: 10.1016/j.jfoodeng.2011.09.014. [10] B. Li, J. Wang, J. Tian, B. Chen, H. Xu, and H. Jia, "Transient cooling performance of R134a flash-evaporation spray enhanced by cold air jet: A novel heat transfer enhancement method in laser dermatology," International Journal of Heat and Mass Transfer, vol. 199, p. 123468, 2022, doi: 10.1016/j.ijheatmasstransfer.2022.123468. [11] E. Colliher, J. Romanin, H. Kacher, C. Fisher, A. Seigneur, B. Nowlin, K. Konno, and X. Y. Wang, "Development of the compact flash evaporator system for exploration " in Proceedings of the 37th International Conference on Environmental Systems (ICES), Chicago, Illinois, U.S.A., Jul. 9-12, 2007, doi: 10.4271/2007-01-3204. [12] C. Wang, R. Xu, Y. Song, and P. Jiang, "Study on water droplet flash evaporation in vacuum spray cooling," International Journal of Heat and Mass Transfer, vol. 112, pp. 279-288, 2017, doi: 10.1016/j.ijheatmasstransfer.2017.04.111. [13] W. L. Cheng, H. Chen, L. Hu, and W. W. Zhang, "Effect of droplet flash evaporation on vacuum flash evaporation cooling: Modeling," International Journal of Heat and Mass Transfer, vol. 84, pp. 149-157, 2015, doi: 10.1016/j.ijheatmasstransfer.2014.12.078. [14] F. Thümmler and W. Thomma, "The sintering process," Metallurgical Reviews, vol. 12, pp. 69-108, 1967, doi: 10.1179/mtlr.1967.12.1.69. [15] P. X. Jiang, M. Li, T. J. Lu, L. Yu, and Z. P. Ren, "Experimental research on convection heat transfer in sintered porous plate channels," International Journal of Heat and Mass Transfer, vol. 47, pp. 2085-2096, 2004, doi: 10.1016/j.ijheatmasstransfer.2003.12.004. [16] P. Smakulski and S. Pietrowicz, "A review of the capabilities of high heat flux removal by porous materials, microchannels and spray cooling techniques," Applied Thermal Engineering, vol. 104, pp. 636-646, 2016, doi: 10.1016/j.applthermaleng.2016.05.096. [17] H. T. Shin, Y. P. Lee, and J. Jurng, "Spherical-shaped ice particle production by spraying water in a vacuum chamber," Applied Thermal Engineering, vol. 20, pp. 439-454, 2000, doi: 10.1016/S1359-4311(99)00035-6. [18] Q. Chen, M. K. Ja, Y. Li, and K. J. Chua, "Experimental and mathematical study of the spray flash evaporation phenomena," Applied Thermal Engineering, vol. 130, pp. 598-610, 2018, doi: 10.1016/j.applthermaleng.2017.11.018. [19] B. Cai, X. Tuo, Z. Song, Y. Zheng, H. Gu, and H. Wang, "Modeling of spray flash evaporation based on droplet analysis," Applied Thermal Engineering, vol. 130, pp. 1044-1051, 2018, doi: 10.1016/j.applthermaleng.2017.11.083. [20] O. Miyatake, T. Tomimura, Y. Ide, and T. Fujii, "An experimental study of spray flash evaporation," Desalination, vol. 36, pp. 113-128, 1981, doi: 10.1016/S0011-9164(00)88635-X. [21] A. Miyara, H. Uehara, and M. Hino, "A study of the spray flash desalination (effect of number of nozzles)," Bulletin of the Society of Sea Water Science, Japan, vol. 45, pp. 339-344, 1991. [22] X. W. Li, X. S. Zhang, and S. Quan, "Evaporative supercooling method for ice production," Applied Thermal Engineering, vol. 37, pp. 120-128, 2012, doi: 10.1016/j.applthermaleng.2011.10.067. [23] O. Miyatake, K. Murakami, Y. Kawata, and T. Fujii, "Fundamental experiments of flash evaporation," Bulletin of the Society of Sea Water Science, Japan, vol. 26, pp. 189-198, 1972, doi: 10.11457/swsj1965.26.189. [24] S. Gopalakrishna, V. M. Purushothaman, and N. Lior, "An experimental study of flash evaporation from liquid pools," Desalination, vol. 65, pp. 139-151, 1987, doi: 10.1016/0011-9164(87)90130-5. [25] D. Saury, S. Harmand, and M. Siroux, "Experimental study of flash evaporation of a water film," International Journal of Heat and Mass Transfer, vol. 45, pp. 3447-3457, 2002, doi: 10.1016/S0017-9310(02)00056-X. [26] D. Saury, S. Harmand, and M. Siroux, "Flash evaporation from a water pool: Influence of the liquid height and of the depressurization rate," International Journal of Thermal Sciences, vol. 44, pp. 953-965, 2005, doi: 10.1016/j.ijthermalsci.2005.03.005. [27] Z. F. Zhou, Y. K. Lin, H. L. Tang, Y. Fang, B. Chen, and Y. C. Wang, "Heat transfer enhancement due to surface modification in the close-loop R410A flash evaporation spray cooling," International Journal of Heat and Mass Transfer, vol. 139, pp. 1047-1055, 2019, doi: 10.1016/j.ijheatmasstransfer.2019.05.063. [28] Z. F. Zhou, X. W. Lin, R. J. Ji, D. Q. Zhu, B. Chen, H. Wang, and Y. J. Lu, "Enhancement of heat transfer on micro- and macro- structural surfaces in close-loop R410A flashing spray cooling system for heat dissipation of high-power electronics," Applied Thermal Engineering, vol. 223, p. 119978, 2023, doi: 10.1016/j.applthermaleng.2023.119978. [29] Y. Fan, F. Su, B. Peng, Y. Ji, N. Zhao, and H. Ma, "Experimental study on liquid nitrogen flash evaporation spray on super-hydrophilic microstructured surface," International Communications in Heat and Mass Transfer, vol. 134, p. 105998, 2022, doi: 10.1016/j.icheatmasstransfer.2022.105998. [30] I. Mudawar and K. A. Ester, "Optimizing and predicting CHF in spray cooling of a square surface," ASME Journal of Heat and Mass Transfer, vol. 118, pp. 672-679, 1996, doi: 10.1115/1.2822685. [31] P. J. Linstrom and W. G. Mallard, "The NIST chemistry webbook: A chemical data resource on the internet," Journal of Chemical & Engineering Data, vol. 46, pp. 1059-1063, 2001, doi: 10.1021/je000236i. [32] C. Elliott, V. Vijayakumar, W. Zink, and R. Hansen, "National Instruments LabVIEW: A Programming Environment for Laboratory Automation and Measurement," JALA: Journal of the Association for Laboratory Automation, vol. 12, pp. 17-24, 2007, doi: 10.1016/j.jala.2006.07.012. [33] MATLAB. (2023). MathWorks. [Online]. Available: https://www.mathworks.com/products/matlab.html [34] F. P. Incropera, D. P. Dewitt, T. L. Bergman, and A. S. Lavine, Incropera's Principles of Heat and Mass Transfer, 8th ed. Hoboken, NJ: WILEY, 2017, pp. 558-564. [35] "Thermocouple types." OMEGA. https://www.omega.com/en-us/resources/thermocouple-types (accessed April 7, 2023). [36] "Pressure transducer." AirTAC. https://as-tw.airtac.com/pro_det_c_kind_4&c_kind2_19&c_kind3_39&c_kind4_538&c_kind5_480&id_351.html (accessed May 10, 2023). [37] J. Yang, L. C. Chow, and M. R. Pais, "Nucleate boiling heat transfer in spray cooling," ASME Journal of Heat and Mass Transfer, vol. 118, pp. 668-671, 1996, doi: 10.1115/1.2822684. | - |
dc.identifier.uri | http://tdr.lib.ntu.edu.tw/jspui/handle/123456789/90698 | - |
dc.description.abstract | 本研究設計一噴霧冷卻及液膜蒸發的實驗設備,利用降低壓力則飽和溫度下降的特性,探討噴霧及液滴蒸發在系統壓力為10 kPa下,不同銅塊初始溫度、銅塊表面結構與噴灑時間對熱傳的影響。其中銅塊表面結構包含平滑表面 (smooth) 、一般燒結表面 (sintered flat) 及輻射狀燒結表面 (radial sintered fins) 三種。
我們發現平滑表面的主要散熱發生在噴灑階段,藉由液滴與加熱表面的碰撞及流動帶走熱量;而一般燒結表面及輻射狀燒結表面的主要散熱則在於液膜蒸發階段,噴霧後液體在表面上形成液膜,藉由毛細結構將工作流體往外圍擴散,以維持液膜蒸發來散熱。由於燒結結構內流阻變大,大幅降低工作流體流速,不利於噴灑階段的散熱,反而是能藉由毛細作用讓流體往外圍流動補充,來增加液膜蒸發的效果。實驗結果顯示,在相同噴灑時間下,隨著銅塊初始溫度增加,加熱表面的最大溫降、最大冷卻率及總冷卻量均明顯上升。這是因為工作流體與加熱表面的溫差越大,熱交換越多。而在相同銅塊初始溫度下,隨著噴灑時間增加,加熱表面的最大溫降及總冷卻量亦明顯上升。對於燒結結構,提高噴灑時間使工作流體在中心處堆積,能藉由提升位能來增加液膜流速及流動範圍,以改善其冷卻效果。 實驗中的最大溫降、冷卻率最大值及最大總冷卻量均出現在平滑表面,其最大溫降為29.8℃,而冷卻率最大值可達 1218.4 W,較一般燒結表面及輻射狀燒結表面提升 208.4% 及358.9%。相比於單純的液膜蒸發,噴灑時液滴撞擊表面所帶來的換熱效益更高。 | zh_TW |
dc.description.abstract | This work studies the spray cooling on various types of surfaces under vacuum pressure. The system pressure is set at 10 kPa, and the influences of the surface in the heat transfer mechanisms are discussed. Three different types of surfaces are tested: smooth surface, sintered flat surface, and radial sintered fins.
The results show that cooling is dominated by the impingement of the spray on the smooth surface, while the evaporation of liquid film controls the heat transfer for the sintered flat surface and radial sintered fins after the liquid film is formed by the spray. For surfaces sintered with microstructures, heat transfer is deteriorated during the spraying stage because the porous layer drastically reduces the fluid velocity. However, fluid replenishment can be facilitated by the capillary force, enhancing the evaporation of the liquid film. As the surface is initially heated to a higher temperature, heat transfer increases due to the larger temperature difference. Longer duration of spray also contributes to better cooling performance. For the surfaces of sintered microstructures, increasing the spray amount leads to liquid accumulation in the central region. The higher potential energy results in the increase in liquid velocity and film coverage, both are beneficial to the evaporation of liquid film. Comparing to liquid film evaporation, spray impingement is a much more efficient mechanism of heat transfer. Therefore, the maximum cooling rate of 1218.4 W can be found for the smooth surface. | en |
dc.description.provenance | Submitted by admin ntu (admin@lib.ntu.edu.tw) on 2023-10-03T17:13:59Z No. of bitstreams: 0 | en |
dc.description.provenance | Made available in DSpace on 2023-10-03T17:13:59Z (GMT). No. of bitstreams: 0 | en |
dc.description.tableofcontents | 論文口試委員審定書 i
致謝 ii 摘要 iii Abstract iv 目錄 vi 符號索引 ix 表目錄 xii 圖目錄 xiii 第一章 導論 1 1.1 前言 1 1.2 文獻回顧 2 1.2.1 液滴閃蒸 2 1.2.2 液膜閃蒸 4 1.2.3 表面結構對噴霧閃蒸冷卻之影響 6 1.3 研究動機與目的 7 第二章 實驗架構與不確定性分析 8 2.1 實驗架構 8 2.1.1 密閉腔體 8 2.1.2 噴霧系統 9 2.1.3 真空系統 10 2.1.4 加熱裝置 11 2.1.5 冷凝系統 12 2.1.6 溫度資料擷取系統 12 2.1.7 壓力資料擷取系統 13 2.2 實驗測量程序 13 2.3 實驗數據分析 15 2.3.1 工作流體之冷卻分析 15 2.3.2 各自冷卻量佔比計算 18 2.4 不確定性分析 20 2.4.1 溫度測量之不確定性 21 2.4.2 壓力量測之不確定性 21 2.4.3 密閉腔體與加熱塊尺寸之不確定性 22 2.4.4 燒結結構之不確定性 22 2.4.5 噴霧時間與控制時間之不確定性 23 2.4.6 噴霧質量流率之不確定性 23 2.4.7 瞬時冷卻率之不確定性 24 2.4.8 累積冷卻量之不確定性 33 2.4.9 冷卻量佔比之不確定性 33 第三章 實驗結果與討論 35 3.1 溫度隨時間之變化 35 3.1.1 平滑表面 (smooth) 35 3.1.2 一般燒結表面 (sintered flat) 37 3.1.3 輻射狀燒結表面 (radial sintered fins) 38 3.1.4 三種表面之比較 39 3.2 噴霧及液膜蒸發之冷卻率 41 3.2.1 銅塊初始溫度之影響 41 3.2.2 銅塊表面結構之影響 44 3.2.3 噴灑時間之影響 45 3.3總冷卻量與不同冷卻機制之冷卻量佔比 46 3.3.1 總冷卻量 47 3.3.2 不同冷卻機制之冷卻量佔比 48 第四章 討論與建議 52 4.1 結論 52 4.2 建議 53 參考文獻 55 附錄 59 | - |
dc.language.iso | zh_TW | - |
dc.title | 噴霧冷卻及液膜蒸發於低壓下對不同表面結構之熱傳分析 | zh_TW |
dc.title | Exploring the performance of spray cooling and film evaporation on different surfaces at low pressure | en |
dc.type | Thesis | - |
dc.date.schoolyear | 111-2 | - |
dc.description.degree | 碩士 | - |
dc.contributor.oralexamcommittee | 黃美嬌;劉耀先 | zh_TW |
dc.contributor.oralexamcommittee | Mei-Jiau Huang;Yao-Hsien Liu | en |
dc.subject.keyword | 噴霧冷卻,液膜蒸發,低壓,燒結結構,初始溫度, | zh_TW |
dc.subject.keyword | spray cooling,liquid film evaporation,low pressure,sintered structures,initial temperature, | en |
dc.relation.page | 85 | - |
dc.identifier.doi | 10.6342/NTU202302977 | - |
dc.rights.note | 同意授權(全球公開) | - |
dc.date.accepted | 2023-08-08 | - |
dc.contributor.author-college | 工學院 | - |
dc.contributor.author-dept | 機械工程學系 | - |
顯示於系所單位: | 機械工程學系 |
文件中的檔案:
檔案 | 大小 | 格式 | |
---|---|---|---|
ntu-111-2.pdf 此日期後於網路公開 2028-08-04 | 5.1 MB | Adobe PDF |
系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。